Used Fireplace Template Fbu for sale (139)

Condition: good (used), The scope of delivery includes: 02x shelf stand, used Material color: sendzimir galvanized upright profile: 85 x 75 x 2,00 mm upright height: 1.455 / 1.300 mm upright depth: 1.100 mm 04x shelf traverse, used material color: orange box profile: 120 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized 03x wire grating, new material color: sendzimir galvanized Execution: mounted shelf gratings, canted on both sides depth: (bearing bar direction) approx. 1.125 mm for upright depth: approx. 1.100 mm clear width: approx. 965 mm width: approx. 885 mm crossbar support: approx. 65 mm mesh width: approx. 95 x 45 mm material thickness wire: approx. 4,5 mm maximum loadable up to 800 kg Ledpfx Afjdvgxiefshr with evenly distributed load 03x Trapezoidal sheet, II. choice Color outside: RAL 8012 red brown Color inside: similar to gray-white Sheet length: 1.500 mm Panel width: 1.075 mm Cover width: 1.035 mm Profile: 35 / 207 01x verge angle, new length: 3.000 mm Material color: RAL 8012 red brown size: 100 x 100 mm thickness: 0,75 mm Finish: 90° folded 25x screws 5,5 x 40 mm A2 max. drilling capacity: 13 mm with 16 mm sealing washer, drill point u. Approval ETA-13/0183 06x screws, 4,8 x 20 mm galvanized, self-tapping for wooden substructure Technical data of the firewood shelter: Total width: approx. 2.900 mm total depth: approx. 1.515 mm total height: approx. 1.535 mm volume to be stored: approx. 3,15 m³ Information: The pictures are sample pictures for clarification of the construction. to illustrate the construction. The material color of the stands and trusses shown may differ. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, Machine with 30 nail feeders in three nail boxes. Freely programmable nail release and stop position, as well as nail release monitoring for 30 nail feeders. Quick hammer box adjustment with various hammer boxes. Usable template length max. 3200 mm. Includes nail filling platform, control cabinet, control console, and ifm SPS Ecomat 100. Lhodpjxl D D Uofx Affer

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Ledpfex Hv U Rox Affshr Specifications: Power: 11 kW

Condition: used, The Eigenbau (Self-build) Perfect binder with PUR is a specialized binding machine designed for precise and efficient bookbinding. This machine is manufactured by Eigenbau and features a perfect binding mechanism with PUR (Polyurethane Reactive) adhesive, ensuring durable and high-quality binding. The machine has a format of 100 mm and is currently available in stock. It is located in Germany, and the price is available upon request. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. Key features of the Eigenbau Perfect binder include a centering function for accurate alignment, a heating roller for optimal adhesive application, and a miniature circular saw for precise cutting. Additionally, it comes with a paper unwinding mechanism and a PLC (Programmable Logic Controller) for automated control. There is also an optional INATEC BS 25002 PUR system available for an additional 1500 EUR, which can enhance the binding process. The machine is equipped with an input station that includes a plate lifting station for efficient material handling. Format: 100 mm Equipment: Centering function Heating roller Mini circular saw Paper unwinding SPS control Optional INATEC BS 25002 PUR ( 1500 EUR extra) input station with plate lifting station Lhedpfsvfx Rtjx Affer

Condition: excellent (used), Year of construction: 2023, S3Y310 BAND FILTER SYSTEM INCLUDING CHIP CONVEYOR BMF-BÜRENER - Coolant tank: 600 litres - Dimensions (LxWxH): 1100x1100x800 mm - Filtration capacity: 150 l/min with emulsion - Average outlet fineness: approx. 60-40 µm - 2x screw spindle pumps MTS20-40 Delivery pressure: 25 bar Flow rate: approx. 24 l/min Power: 3 kW - 2x submersible pumps SPK2-23/15 (rinsing) Delivery pressure: 4.3 bar Flow rate: approx. 35 l/min Power: 0.75 kW - 1 roll of filter paper - 1 unit hinged belt chip conveyor with pre-filtration, lifting tank and lifting pump Lhedjxv Dbhspfx Affsr (Flow rate approx. 170 l/min) - Coating: Graphite grey RAL7024 Year of manufacture: 2023

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank Ljdpfx Aowx Dcyeffjhr * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: new, functionality: fully functional, Structuring / Sanding Brush Set Manufacturer: Ehrholz Compatible with Makita 9741 brush sander Surplus package with assorted grits. The items are new, only the outer packaging is missing. Includes: 11 pieces grit 60 10 pieces grit 80 3 pieces grit 100 Lodpfxew Eybxo Affjhr

Condition: good (used), functionality: fully functional, For sale is a copy milling machine from Makre Franz Kuhlmann KG, GM 1/2 series. The machine is fully functional and ready for immediate use. Technical specifications: Lhsdpowal Dhofx Affor X-axis (longitudinal travel): 330 mm Y-axis (transverse travel): 200 mm Z-axis (vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet bores up to 8 mm possible Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to help you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Lodju R S Elspfx Affjhr Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: good (used), Code: 0327 Lsdpfx Aox Ig S Asffohr Brand: SCM Model: R/9 Router with automatic copying device for producing wooden elements, templates, chairs, contours, mirrors, special profiles Automatic copying device: Roller drive system (one movable and one fixed, coaxial with the tool) that automatically advances the workpieces, placed over a template Distance between spindle and column mm 915 Spindle vertical stroke mm 110 Table vertical stroke mm 200 Max distance between table and spindle mm 310 Conical connection MK 2 Rotation speed 10000/20000 rpm Motor Hp 5,5 Table dimension mm 900 x 750 Compressed air 6 bar Overall dimensions mm 1300 x 1650 x 1650 h Weight kg 680 MACHINE NOT RECONDITIONED , SEEN AND LIKED UNDER THE CONDITION IN WHICH IT IS FOUND , WITHOUT ANY WARRANTY

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Lhodpextbtpsfx Affor Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm Lhjdpfx Afow Rv Ahsfsr - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: new, axle configuration: 2 axles, Paving stock sorting cart with templates for mechanical paving clamp. Lhsdpfxex I Enis Affsr State: New

Year of construction: 2023, condition: new, UNIVERSAL AUTOMATIC SAW AND SPLITTER PŁD- 400/20T Saw splitter is a chain saw with a conveyor used for preparing firewood , fireplace wood in large quantities . This device combines in one working cycle cutting wood with a chain saw together with its splitting and transferring to a heap by means of a conveyor belt. Purpose : mainly for companies engaged in the production of timber for commercial purposes , the machine will also find use in households , agricultural , greenery maintenance plants , forestry and municipal . TECHNICAL DATA: - cutting diameter - 40 cm - ram pressure force - 20 tons - cutting length adjustment - 25/55 cm - drives : electric 7.5 KW 3000 rpm ( optionally gasoline 13 HP ) - cutting bar motor hydraulic - sawing : STHIL chain saw - automatic high speed valve of the main piston - capacity of two hydraulic pumps - length of the splitting cycle including cylinder return 3/7 s Lhedoh T Dfvspfx Affsr - productivity of saw-saw splitter 4-6 mp/h - splitting knife 2/ 4 parts - height setting of splitting wedge manual - hydraulic feeder feeding the timber under the cutting guides 200 mm x 1900 mm - exit feeder receiving timber hydraulic 250 mm x 3200 mm Optional equipment at extra charge : - PLD 480 CM /30 TON AUTOMAT model ( on request ) - light transport chassis for electric model or with combustion engine - wood feeder with hydraulic loading - timber feeder 1000x 3000 - Wood feeder 1800 x 3000 - splitting wedge for 6-parts The basic model is equipped with the function : sawing by chain guide , moving the timber under the saw and loading the log the operator performs with hydraulic levers . Splitting and transporting the split billets by the receiving feeder is done automatically and the log pressure and setting the height of the splitting wedge is done manually by the operator . The machine is produced in a version powered by a 7.5 KW electric motor or a 13 HP gasoline engine . The P£D-400 is equipped with an automatic high speed valve , I automatically adjust the optimal force of the main piston in the working range of 7-20 tons , so that when splitting thin logs the speed increases , while with thicker logs the splitting force increases . The automatic high speed splitting valve significantly reduces the working time and significantly reduces electricity consumption . PRODUCTION-COMMERCIAL-SERVICE COMPANY "TRAK- MET" Bolesława Chrobrego Street 27/29 11-300 Biskupiec Nip.739-294-53-24

Condition: good (used), Standard equipment - Basic device profile projector Mitutoyo PJ 3000 Ledpep H Ta Dofx Affehr - Ground glass D 300 mm with clamp for fastening of a radius template - Objective 10x and reflected light mirror - Measuring table with travel ... a) MT X 100x Y 50 mm or 150x50 mm with glass plate - Illumination device for transmitted and reflected light (24V/150W) - Calibration protocol I Instructions D Delivery I Instruction I Factory and Daaks calibration possible

Condition: used, Grinding wheel diameter max.: 225 mm grinding wheel diameter max.: 225 mm Largest tool diameter: 300 mm Smallest tool diameter: 80 mm Tool width max.: 230 mm tool width max.: 230 mm Weinig Rondamat 929 knife grinding machine for producing profile knives. Production from a straight blank or regrinding of used knives using a template. * Incl. new coolant pump. Lhjdpfslf H Tgsx Affor

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: Lsdpjiz Aufjfx Affjhr M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. - Indicated prices are valid as pickup prices ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES Lhedeudif Tspfx Affsr – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Locatelli MK-CC automatic lathe Turning length: 1200 mm Maximum turning diameter: 200 mm 3 template-guided floating tools 3 upper approaching tools Lodpfx Afsx Ekv Hofohr

Condition: used, mileage: 211,736 km, power: 353 kW (479.95 HP), first registration: 03/2022, fuel type: diesel, overall weight: 20,500 kg, gearing type: automatic, Equipment: air conditioning, parking heater, soot filter, Vehicle number: 253199 1 owner, accident-free, full service history, non-smoker ---- HIGHLIGHTS & PACKAGES * Auxiliary heater ASSISTANCE SYSTEMS * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) INTERIOR * Air conditioning * Left-hand drive * Driver seat armrest * Black seat belts LIGHT & VISIBILITY * LED headlights OTHER EQUIPMENT * ZF Intarder * 120 A alternator Additional features ----Paint/Color---- Cab color H3329GREE * Chassis color: Gray ----- Tires / Wheels ----- F1, 385/55R22.5MI XMF 160/000 K Steering BB72-2 * R1, 315/70R22.5MI XMD 154/150 L Traction DC75-2 * Steel disc wheels, silver gray ----- Equipment / Special equipment ----- Front axle 8T * Rear axle 13T * MX-13 engine, 355kW/483 HP * Automated TraXon transmission, 12 speeds * Technically permitted gross chassis weight max. 20,500 kg * AdBlue tank 90l on left fender * Emission class Euro 6 * Mechanical differential lock * Wheelbase 3.80m / rear overhang 0.99m * Steering wheel, leather, black * Glass roof hatch, electric operation * Driver's seat: Luxury Air * Pneumatic tool preparation * Passenger seat: Basic * Passenger seat fixed * Door trim: loosely woven fabric * Interior trim color scheme: Dark Sand * Cab interior trim Delta black * Water auxiliary heater * Timer for auxiliary heater * Roof hatch, electric operation * Cold foam mattress for lower bunk * Upper bunk * Lower bunk with 65-liter drawer * Automatic cab climate control * Safety net at both bunks * Curtains with partition curtain * Cool box or refrigerator * Three ignition keys * Auxiliary power supply: standard + 2x 40A * PL lights in cab roof lining * ECAS remote control with extended functions * Water auxiliary heater * Auxiliary heater with waste heat pump and timer * Single front axle * Single rear axle * Rear axle SR1344 * First steering rod height 84.5 mm * Camber adjustment for normal road conditions * First steering rod length 270 * With ECAS air suspension * Stabilink rear axle suspension * Parabolic front suspension * One driving height position, standard height * Front axle with leaf springs * Rear axle with air suspension * 4x2E * Type FT * Vehicle series XFH * Motor project version 10.673/74 * Fully Built Up (FBU) manufacturing * Cab width 2550 mm * Air filter with single element * Top air intake * Dust shield * Heated fuel pre-filter * Drive rear axle with disc brakes * Standard compressor pipe * Parking brake actuator with test position * Cab type U249 * Cab suspension mechanical * Cab - Super Space Cab * Super Space Cab * Convex main mirror * External sun visor, green translucent * Headlight beam for right-hand traffic Ledewk Ab Eopfx Affshr * Fog lights * Skylights * Longitudinal member height 260 mm * Right chassis side clear, 1600 mm * Catwalk with step, standard * Steering with Euro certificate * Splash protection * Work lights, LED * Battery box in rear overhang * Aluminum air tanks * AdBlue tank 90 l, on left fender * Aluminum fuel tank, height 620 mm * EAS unit on right side * Tail lights with LEDs * Exhaust pipe horizontal, low * Front underrun protection 365 mm below frame * Idle shutoff automatic, 5 minutes * Rear axle ratio 2.38 * Premium sound system with 6 speakers * Speaker under lower bunk * Adaptive cruise control with F

Condition: used, Year of construction: 2005, No. 3256 CNC machine for pallet production Sysmathick RPA9 + stacker Used, year of construction 2005, machine already dismantled Machine for assembling wooden parts with top and bottom nailing The RPA9 is a machine with circulation chains for the production of pallets in standard dimensions according to four templates (maximum 1600 x 1400 mm LW) Operation via a touchscreen Format changeover within a few minutes Two programming methods: - digital programming via PC (input of coordinates) - Manual programming via touch screen Lhedsx Dddxopfx Affjr Storage of tens of thousands of products Automatic control of the distance between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top 3x N58 & 3x N400, bottom 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-level pallets thanks to the heads Equipped with pneumatic cylinders Pneumatic pressing of the boards during assembly Minimum pallet dimensions 600 x 300 mm LW Maximum pallet dimensions 1600 x 1400 mm LW Maximum template dimensions 1700 x 1600 mm LW Maximum nailing capacity 1600 x 1400 mm LW Maximum pallet height 190 mm Minimum pallet height 110 mm Machine capacity 60 - 200 pallets/hour Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Manual planer knife sharpener Weinig Rondamat 931 for sharpening and grinding profile knives and straight planer knives in the planer head using templates. Max. tool width: about 230 mm Lsdpsw Au Rcofx Affjhr Grinding speed: infinitely adjustable Mandrel: 30 / 35 / 40 / 50 / 60 mm

Condition: used, Year of construction: 2018, machine/vehicle number: Werksüberarbeitungsnummer: WÜA18031207013284, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, table length: 840 mm, main saw diameter: 450 mm, power: 7.5 kW (10.20 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0399 F45 Pro Drive Year of manufacture: 2018 Template holder Max. saw blade diameter: 450 mm Motor: 7.5 kW Vario DRW: 3000 mm TPL: 840 mm WGA Digit-L PA 1300 mm CNC Front support roller Lhodpfx Aew Nii Soffer Air cushion table

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware Lhsdex Emguepfx Affjr BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle motor power: 18,500 W, Homag CNC Machining Center BAZ 211/60/K Venture 21 XXL with 6 m working length, PowerEdge edge banding unit, renewed vacuum pumps, Windows 10, and WoodWOP 8.1, in very good condition: – Workpiece length 6000 – 6175 mm – Pendulum processing 2375 – 2550 mm – Workpiece width 1400 – 1550 mm – Maximum workpiece thickness 300 mm – Working height 950 mm (underside of workpiece) – Modernization I 2023: – 2 new rotary vane oil-lubricated vacuum pumps – Capacity 2 x 63 m³/h = 126 m³/h – Retrofit kit for separate cooling unit for main spindle – Modernization II 2024: – New machine PC with Windows 10 operating system – Upgrade to WoodWOP 8.1 – 4-axis CNC machining center – K console table – 10 consoles incl. front stops – 6 rear stops – 6 lift rails – 2 side stops each left/right/mirrored – 2 pneumatic connections per machining position – 2 vacuum connections for templates – C-axis with aggregate and electronic interface – Safety device with anti-slip mats – Main spindle 18.5 kW vector controlled – Liquid cooling for main spindle – 10+18-position disc tool changer: – 10-position disc changer moving with main spindle – 18-position disc changer moving with X-support – MPU drilling head 30 spindles V20 / H10 / S360° – MultiProcessingUnit with C-axis +/- 185° – 20 vertical high-speed spindles – 10 horizontal spindles – Grooving and separating saw 200 mm – PowerEdge 360° edge banding unit – Pickup station moving with X-support – Edge thickness 0.4-3 mm – Max. edge height 65 mm – 360° edge banding with butt joint – Pre-trimming station and single roller for PowerEdge – Hot air nozzle for edge banding unit Lhedpfx Afsx Dzbzofjr – Combined flush trimming and finishing unit WD 60 mm – Flush trimming of edge overhangs – Finishing pre-milled edges – For use in main spindle – Probing for compensation of workpiece tolerance – 2 WPL radius cutter heads – 2 profile cutters for finishing unit – C-axis extension for Flex-5 unit – 10 LED position display systems for consoles – Optical LED display system – For positioning clamps and consoles – 4-fold configuration with 2 x 2 clamping positions – Separate vacuum systems – Detachable console for adjustable side stop – 2 additional side and longitudinal locating pins – 2 additional clamping consoles 1300 mm – 2 additional side and longitudinal locating pins – 2 additional lift rails for console table – 12 vacuum clamps 160x115x100 mm – 10 vacuum clamps 125x75x100 mm – Saw/drill unit with 2 spindles for tool changer – Saw blade diameter up to 240 mm – Side wall safety fence (left) – Rear safety fence – Side wall safety fence (left) – Year of manufacture 2008, single owner, very well maintained – Machine serviced regularly – No maintenance or repair backlog, no major defects – For sale ex location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and trial run possible by arrangement