Used Feed Apparatus for sale (11,929)

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz Isdpfxjuzn Nno Abneif - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Hydraulic pump: Technical data: - Oil capacity: 160 L, - Engine: EMOD Type 132S/2, 5.5 kW, - Engine: LS 160 L-4, 15 kW, Iodpjzry D Defx Abnsif

Condition: used, Set of 9 Newly rubberised or as good as new Technical data: - d = 30 mm - D = approx. 125 mm Iisdpfxjzryzvj Abnjf - B = 50 mm - Groove = 8 mm

Condition: used, A set of spacer rings with a 10 mm keyway for use on various woodworking machines, in particular planers. Technical data: - Thicknesses: 40, 40, 20, 20, 10, 10, 5 mm - Bore: 35 mm Isdjzryl Ijpfx Abneif - Flight circle: 50 mm

Condition: used, Adjustable feed (DISCO adjustment gearbox) Lenze gearbox, type 12 602 20 1 3 2/81 Iisdpfxjzrxvfs Abnef Technical data: - P1: 3.0 kW - n1: 1,500 rpm - M2: 444–800 Nm - n2: 52–8.7 rpm

Condition: used, Hydraulic feed gearbox suitable for Harbs woodworking machines or similar. The gearbox allows for manual, infinitely variable adjustment of the feed or gearbox speed. Technical data: Isdpfezrxuuex Abnsif - Gear motor: 7.5 kW

Condition: used, Kölle KS40 table saw for precise rip, cross and format cuts in solid timber, panel materials and timber profiles. The robust, heavy-duty machine construction, featuring a swivelling saw unit, scoring unit and Wegoma Type VS48K feed mechanism, is particularly suitable for joinery workshops, carpentry workshops and versatile workshop use. Iedpfx Abszrxbnonoif Technical data: - Cutting width: ~ 850 mm - Motor: 7.5 kW - Swivelling: 45°

Condition: ready for operation (used), Size max 315 x 410 mm Size trimmed max 300 x 380 mm Size trimmed 50 x 80 mm Speed max 1.080 c/h Feeding height 100 mm Table height 900 mm Clamping pressure min 500 daN Clamping pressure 2.000 daN Power requirements 2,2 kW (220/380V, 50Hz) Iodpfx Absyi Szwenjif Width 1.370 mm Depth 2.100 mm Height 1.550 mm Weight 1.880 kg (approx.)

Condition: ready for operation (used), WEISSER HEILBRONN - Junior - Lathe -Center height approx. 220mm -Turning diameter over bed 440mm -Distance between centers approx. 1000mm -Spindle bore approx. 50mm -Spindle speeds 40-2000 RPM -Automatic longitudinal / cross feed -Threading / Metric / Inch etc. -Incl. HEIDENHAIN ND 780 / 3-axis digital read-out -FORKARDT F250 3-jaw chuck Iodpeztbhmsfx Abnsif -Multifix with inserts -Electric chuck guard -L&Z spindle cover -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.9 meters / Weight 1700 kg Errors and omissions excepted.

Condition: ready for operation (used), Leading and feed spindle lathe Weiler Matador -Center distance: 500 mm -Center height: 140 mm -Feed range, longitudinal, via belt: 0.05–0.40 mm/rev -Feed range, longitudinal, via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck device -Wedge shank chuck Forkardt F 16 -Quick-change tool holder & Multifix -Work light -Chuck guard -Drill chuck -Follower rest -Machine feet -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Iodpfx Ajztbfxobneif

Condition: ready for operation (used), Leading and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Chuck guard -Forkardt F 160 three-jaw chuck with wedge shank -Quick-change tool holder Multifix & insert -Drill chuck -Follower rest -Documentation Iodpfx Asztbbtebnjif Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted.

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Condition of guideways: "Good" -Optional 3-axis digital display -Center height 165mm Ijdpfx Abezta Dmsnjif -Swing over bed 330mm -Distance between centers 800mm -Spindle speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Collet chuck - quick-change system -Four-jaw chuck -Multifix base and insert -Chuck guard -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2.0 x 0.8 x 1.6 meters / Weight 850 kg

Condition: ready for operation (used), Lead and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Feed range, longitudinal, via belt: 0.05–0.40 mm/rev Iedpoztaz Ejfx Abnsif -Feed range, longitudinal, via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck -Three-jaw chuck -Multifix base with inserts -Work light -Follower rest Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: ready for operation (used), Lead and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor Iijdpfx Abjztay Uenjf -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck -Four-jaw chuck -Multifix base with inserts -Work light -Drill chuck -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm Iodpfxozr Rnys Abnoif -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center Isdpezphf Defx Abneif - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: used, Year of construction: 2020, saw blade diameter: 600 mm, cutting height (max.): 200 mm, total length: 8,000 mm, total width: 2,000 mm, Push-feed crosscut saw, equipped with a 4-meter pusher, cutting height: 30 to 200 mm, cutting width: 300 to 580 mm, pusher capacity: 350 kg. Iedpfx Absyzrb Asneif

Condition: excellent (used), HOLTEC HFT 21 packet cutting saw with automatic feed – year of production 1986 – German production – electric roll feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm Iedpeiwfm Ujfx Abneif - roller diameter 160 mm - height of the rollers from the base 730 mm - total length 9400 mm Transport dimensions 650 x 200 x 256 cm weight 2000 kg

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm Iedpfefwl Uaex Abnoif maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: used, Cross Conveyor: Iiedpfexu E E Eex Abnjf - total length: 7000 mm - total width: 2300 mm - feed motor power: 0.75 kW - trimming saw for material - saw motor power: 2.2 kW - max. saw blade diameter: 350 mm - cutting height: 80 mm

Condition: used, functionality: fully functional, Year of construction: 2003, Material feed hopper -Top -Grating -Discharge/transfer conveyor Iiedozq S Hzspfx Abnof -Conveyor belt

Condition: used, functionality: fully functional, 4 x feed hoppers/dispensers - withdrawal conveyor - conveyor belt/transfer belt - electrical system, as applicable Iisdpfozq S Huox Abnef

Condition: used, functionality: fully functional, Year of construction: 1996, Used scrap conveyor Iiedpszq S Avofx Abnof -Extraction belt -Conveyor belt

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Inspected and ready for production. Complete coil feeding system integrating uncoiling, straightening, and servo-driven feeding in a single compact unit. Engineered for continuous operation in cut-to-length, stamping, or deep-drawing lines, offering high precision and reliability. Robust equipment, ideal for processing carbon steel, stainless steel, and aluminum. Main Components • Powered hydraulic decoiler  Capable of handling heavy coils  Motorized coil loading car for rapid coil changeovers  Loop control via laser sensor  Protected loading area with safety barriers, ensuring excellent process visibility • Combined straightener-feeder  Head equipped with 11 straightening and feed rollers  AC servomotor with PLC control + touch HMI  Automatic threading and de-clamping functions to facilitate strip insertion Iiodey Edfzepfx Abnsf • Integrated electrical and hydraulic systems  Independent electrical cabinet  Precise advancement control and synchronization with downstream equipment Key Technical Data  Maximum strip width: 1,400 mm  Sheet thickness: up to 3 mm (carbon steel / aluminum) up to 1.5 mm (stainless steel)  Power supply: 400 V / 50 Hz  Hydraulic pressure: up to 130 bar

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Ijdpfx Abexlla Dsneif