Used Feed Apparatus for sale (14,368)

Year of construction: 2000, condition: repair required (used), Feed transport equipment consisting of 1 piece conveyor belt and 1 piece roller conveyor ideal for (A) before planing machine with much hand saw (B) before cutting band saw or other saw (C) at the inlet before other machines in the state as is and without electrical control Iedpfedi Nykox Affjik

Condition: used, Year of construction: 1998, Used, in top condition Make: Panhans Model: 76 Year of manufacture: 1998 Machine No.: 648 Original price approx. €4,800.00 Iodpfjxuv Nzjx Affeik Location: 97447 Gerolzhofen, loaded free, unpacked Handover in as-inspected condition, without warranty or guarantee

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Isdpfju Ic Ewsx Affoik Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Year of construction: 2007, operating hours: 151,620 h, functionality: fully functional, machine/vehicle number: 0-250-04-2835, THE MACHINE IS USED FOR THE PRODUCTION OF PANEL FURNITURE. Iiedjxuhlnjpfx Affek - LARGE WORKING AREA ALLOWS FOR MACHINING OF LARGER PANELS AND COMPONENTS - FAST AXES, WHICH CAN INCREASE PRODUCTIVITY WITH GOOD PROCESS ORGANIZATION - HIGH-QUALITY VACUUM CLAMPING TECHNOLOGY – SUITABLE FOR PROCESSING PANELS AND FURNITURE - WELL-KNOWN BRAND AND SERIES IN THE WOODWORKING/WOOD PROCESSING INDUSTRY, MAKING IT EASIER TO FIND SPARE PARTS AND SERVICE

Condition: used, STC in-feed conveyor belt Isdpfx Aot Sbg Heffoik Measurements are in the photo album

Year of construction: 2021, operating hours: 1,513 h, condition: used, functionality: fully functional, overall weight: 11,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter feed materials. Equipped with a plate belt, the hopper reliably handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted. Ijdpfexta D Tex Affoik This module is part of our rental fleet.

Condition: reconditioned (used), gang saw setting device for setting and resetting on both sides in one pass for gang saw blades up to approx. 3 mm thick, with feed device, with 2 new dial gauges, with quick height adjustment, with clamping rail and clamping carriage for gang saw blades Iiedoru Dabjpfx Affek

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21513 Specifications: Unknown year Lister engine Worn belts Feed hopper Isdjxl Ravepfx Affoik Ready for delivery Description:Finlay Hydrascreen screener with feed hopper.There are worn belts on the screener (see pictures)Ready for delivery. Own weight: Model: Finlay Hydrascreen sikteverk m/ matekasse

Condition: used, Technical details: Iijdju Iczfopfx Affsk plate width: 400 mm max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described. *

Condition: good (used), Year of construction: 2015, Chipper with horizontal feed , but vibrating chute is not included working width 350 mm Iisdpfx Aok Twl Tsffok Motor rotor 30 kw

Condition: used, Mobile inclined conveyor belt, compact and mobile on wheels. Iodpfx Asu N Na Rjffeik

Condition: used, Year of construction: 2022, operating hours: 289 h, functionality: fully functional, machine/vehicle number: B0201, total width: 2,450 mm, total length: 6,050 mm, total height: 2,700 mm, empty load weight: 9,600 kg, Our FEED VIBRO features a combination of feed hopper, leveling roller, and dosing slide, ensuring consistent material feed. Thanks to the integrated drum magnetic separator with selectable strength, magnetic particles can be sorted. If pure dosing without magnetic separation is required, the magnet system can be deactivated. This module is part of our rental fleet. Iijdexrtt Sopfx Affok

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Iiedsxladwspfx Affek

Condition: good (used), Year of construction: 2008, functionality: fully functional, Homag Weeke Optimat BHX 500 20KW Center Machine in excellent condition Iodpfx Ajw A R Iqjffeik Viewable in department 14 Dismantling, loading, and transport at buyer's expense

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Iijdpfx Afeu N E Htjfsk Both pumps = 7.5 kW Weight 164 kg *

Condition: used, Year of construction: 2018, operating hours: 5,400 h, functionality: fully functional, machine/vehicle number: 0-250-97-8163, HOMAG DRILLTEQ V-200 Optimat BHX055 Machining Center – used – Machine purchased in December 2018 / commissioned January 2019 Processing in throughfeed mode, Ball screws on all axes, Network card for remote service support, Isdpsxpukgsfx Affoik Saw unit for grooving in X-axis, Pick-Up type tool changer, Ite Dibow Hdh Es Ia Asn Integrated control cabinet ----- Technical Data ----- Minimum workpiece length X: 200 mm, Minimum workpiece width Y: 70 mm, Minimum workpiece thickness: 8 mm, Maximum workpiece length X: 3,050 mm, Maximum workpiece width Y: 850 mm, Maximum workpiece thickness: 56 mm, Machine control software: WOODWOP 8, Screen diagonal: 24 inches, touch screen, Main spindle motor power: 10 kW (S6), Main spindle speed: 1,250 – 24,000 rpm, Main spindle holder: HSK-F63, Drilling unit motor power: 2.3 kW, Number of vertical drilling spindles: 13 pcs, Number of double horizontal drilling spindles in X-axis: 2 pcs, Number of double horizontal drilling spindles in Y-axis: 1 pc, Saw blade diameter: 100 mm, Number of tools in changer: 4 pcs, Vector speed (X-Y): 50 m/min. Quality information: - comprehensive basic cleaning - electrical system checked - pneumatic system checked

Condition: used, STC conveyor belt In-feed belt Dimensions are in the photo album Ijdpfx Aot Sbgysffsik

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. 2 Component Follower Plate System. Iisdpfx Aeif Ug Esffsk

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price. Iiodpfx Aoxnryieffok

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Iiodpfsxnpx Nsx Affok

Condition: used, Technical details: Roll lenght: 1200 mm roll diameter: 95 mm total power requirement: 1,5 kW weight of the machine ca.: 2,0 t dimensions L x W x H: 4,3x1,5x0,45 m 2 roller conveyor available - construction type: stable angle iron construction Ijdpfx Aou Nkv Teffsik - rolls are driven via motor (380V; 2,15A mit 1400 U/min) - rolls are adjustable - conveyor belt size: 4100x1200mm *

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Iijdeu R Rtbepfx Affek Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2025, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Grinding wheel width: 500 Grinding wheel diameter: 610 Iisdpegmf Rnefx Affsk CNC: 5 axis (new)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Iodpfx Afexd Tknefeik Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: excellent (used), Simodrive feed model Make Siemens Type 6 SC 6116 OAAOO G 600 D 490 / 49 M6 REQ Output current 60/120 A Space requirement :D. 290 x W.150 x H.480 mm Iiodsfhkt Rjpfx Affok Weight 13 kg