Used Extruders for sale (389)

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: Djdpfjznz Ezox Al Aowc • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Djdpfx Aszhnluol Aewc

Condition: like new (used), functionality: fully functional, Year of construction: 2006, operating hours: 1,608 h, screw conveyor diameter: 50 mm, Krauss Maffei KMD-50K in very good condition for sale. This extruder comes from the first owner and was used in a technical laboratory – original 1608 operating hours! Delivery includes documentation, hopper, and adapter. An inspection while the machine is powered on can be arranged at any time. Technical specifications: - Model: Krauss Maffei KMD-50 K - Year of manufacture: 2006 - Operating hours: 1608 - Weight: 1800 kg Dwodpjz A Rvvofx Al Ajc - Standard profile screw - Closed screw temperature control Loading via forklift. Delivery, export documents, or training can be arranged upon request. Please feel free to contact us if you have any questions.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Dwedpfx Aley Ez Ers Aec Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Year of construction: 2026, operating hours: 36 h, condition: used, functionality: fully functional, Product weight 2-500g, power220V/1P/50HZ, 0.6KW, Speed50-150pcs/min, machinesize: L1240*W535*H1130mm, SUS304,Weight 95kg The equipment can accurately divide the dough/pastry into evenly sized small dosages, which is suitable for the productionof variouspasta, and the divided dosage will be automatically beaten into the required shape, which has high production speed and high production efficiency. Hopper Material: 304 stainless steel 1. Food standard 2. The hopper is suitable for many kinds of fillings like dry filling, scattered filling and other fillings with poor liquidity. It is more anti-corrosion and stable. Enjoy a long life. Cutter and safety cover Features: 1. Easy to take apart and control product length. 2. Does not stick dough. 3. All the material which can touch food we also use healthy materials. 4. Can make different shapes by changing nozzles. 5. High-quality nozzle material. Used, in good condition, still under 1-year warranty from the manufacturer. Selling due to the factory closure. More videos & photos on request. Dwsdpfx Aljzx D Dbe Ajc

Year of construction: 1996, operating hours: 25,000 h, condition: good (used), functionality: fully functional, single-screw extruder, 90 Reifenhauser, complete with electrical panel and 200 kW motor. The machine is in excellent condition. Dwedjzbh Ahjpfx Al Ajc

Year of construction: 2025, condition: like new (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Dedpfx Alsz Eg S Ee Aewc For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, functionality: unexamined, Used BARMAG / EMS-Inventa AG extrusion and spinning-related industrial equipment available in Thailand. The equipment is currently installed at an existing industrial facility in Thailand. The available equipment includes BARMAG and EMS-Inventa AG machinery together with various auxiliary and process equipment, including: - Extrusion-related machinery - Spinning-related production equipment - Process vessels and tanks - Feeding / dosing equipment - Pumps and auxiliary equipment - Motors and gearboxes Dwodpsz Hzuqofx Al Aoc - Heating and cooling systems - Electrical control cabinets - Process piping and auxiliary systems The equipment is offered as used machinery. The exact models, manufacturing years, technical specifications, completeness and current operating condition are subject to verification. The equipment may be available as a complete production line, individual machines or selected components, depending on the buyer's requirements. Additional photographs, nameplate information and technical details can be provided to interested buyers. The equipment is located in Thailand and can be inspected by appointment. Dismantling and transportation are to be arranged with the buyer.

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. Djdozxhfiepfx Al Ajwc The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, 2 Kowin 232 extruder pelletizing lines for sale one brand new 2024, second 2011 good working conditions output capacity 275Kg per H Dwsdpfx Aloz D T Nbs Aoc genuine reason for selling

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Dsdpfx Aljzulh Tj Aewc Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: used, Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2×7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift (up to overhead frame conveyor) FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria and can be seen in our warehouse on appointment Dsdpfx Aloz Ipcrj Aewc

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 4977, screw conveyor diameter: 60 mm, Leistritz ZSE 60 max.X-44D Extruder (2018) comprising Leistritz ZSE 60 max.X-44D twin-screw extruder with 2x 60 mm diameter screws 40:1 L/D ratio, co-rotating 10-barrel housing section, electrically heated and water-cooled Dwodpfx Alsz Akmqs Aoc 2 degassing ports 1200rpm max.imum screw speed Motor with Flender direct-driven gearbox

Condition: used, functionality: fully functional, Year of construction: 2018, screw conveyor diameter: 52 mm, Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder (2018) comprising Dwedjz Atiuepfx Al Aec Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder with 2x 52.2 mm diameter screws 48:1 L/D ratio, co-rotating 12-barrel housing section, electrically heated and water-cooled Side feeder 1200rpm max.imum screw speed 350kW motor with Eisenbeiss ZE-042.5-16.0 gearbox

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. Dwjdpjumubyofx Al Aoc The system can be viewed during operation. A new extruder screw was installed in February.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Dsdeq R Tkwepfx Al Ajwc Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Dedjz Ag Udopfx Al Aswc Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour - C4 control system - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Year of construction: 2025, condition: excellent (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Djdpfx Asz Eg Rzol Aewc Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 2008, This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm Dsdpfxoz Egy No Al Aswc

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm Dsdpozfxwisfx Al Aowc BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, performed by Davies-Standard LTD Net price: 45,000 EUR

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Dwedpfx Asz Eg Awsl Asc Other: All documentation available in German The machine was originally used for biomaterials

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE Co-extruder MEB 38/2 - Motor: 5.2 kW / Max. screw speed: 42 rpm - Screw diameter: 38 mm - Screw length: 25D - Smooth, single-piece barrel - 4 barrel heating zones - 1 flange heating zone Djdjzmnp Repfx Al Aswc - 1 die heating zone - KS 40 controller - 3-zone screw - Die connection: IDE M48x2 - Melt pressure and melt temperature measurement - Height-adjustable - Tilt-adjustable - Barrel and screw in very good condition - First-hand ownership, very well maintained, only 811 operating hours, used only in a technical center.

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Djdpfjzwhtdox Al Aswc

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 - Year: 2006 Dwjdpfx Aszxr Uuel Ajc - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, Dodszarn Ejpfx Al Aewc - more details available