Used Extruders for sale (390)

Condition: used, functionality: fully functional, Year of construction: 2018, screw conveyor diameter: 52 mm, Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder (2018) comprising Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder with 2x 52.2 mm diameter screws Dodpsz Atiujfx Al Ajku 48:1 L/D ratio, co-rotating 12-barrel housing section, electrically heated and water-cooled Side feeder 1200rpm max.imum screw speed 350kW motor with Eisenbeiss ZE-042.5-16.0 gearbox

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300 Dodpfsq R Tkwjx Al Asku

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour - C4 control system - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. Dkjdpfx Aez Ag Udsl Aou - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Year of construction: 2025, condition: excellent (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Dodpfx Aljz Eg Rze Asku For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 2008, This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Dsdez Egy Nspfx Al Aeku Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Dsdpfx Alezfxwij Aeku Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, performed by Davies-Standard LTD Net price: 45,000 EUR

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: Dedpfxez Eg Awj Al Asku – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE Co-extruder MEB 38/2 - Motor: 5.2 kW / Max. screw speed: 42 rpm - Screw diameter: 38 mm - Screw length: 25D - Smooth, single-piece barrel - 4 barrel heating zones - 1 flange heating zone - 1 die heating zone Dsdpfozmnp Rox Al Aeku - KS 40 controller - 3-zone screw - Die connection: IDE M48x2 - Melt pressure and melt temperature measurement - Height-adjustable - Tilt-adjustable - Barrel and screw in very good condition - First-hand ownership, very well maintained, only 811 operating hours, used only in a technical center.

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Dksdpfx Alezwhtdo Asu

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW - Up to 40 rpm Dkjdpfozxr Uuox Al Aeu - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Year of construction: 1995, condition: good (used), functionality: fully functional, Bausano complete granulating line, including generator. Output: 350-400 kg/h. Dedpfezcarqsx Al Aoku

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 15,000 h, includes 3x Brabender gravimetric dosing units includes stand Dodpfxsz Eu S Tj Al Aoku includes chiller includes temperature control unit includes 1x side feed; a second LSB (lateral screw feeder) is also included, and installation is possible on each cylinder. More information available upon request. Inspection is possible in Hilpoltstein.

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Dkedpfx Alezc I Igs Asu Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, Djdpfjzarn Ejx Al Asku - more details available

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Dkodpfx Alozl A N Nj Asu Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION Dkodewivdkspfx Al Asu

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar Dksdpoztu Dbofx Al Aeu EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table Dkedpfjxw Tumox Al Aeu For further information, please inquire. Price on request.

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. Dkjdpjw Iu T Tsfx Al Asu • Screw diameter: 200 mm • with degassing zone • Drive power: 72.5 kW

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² Dkedpfxszhm Ihe Al Aeu 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for rigid PVC Suitable for HFFR formulations Suitable for elastomer compounds for low-, medium-, and high-voltage cables TECHNICAL DETAILS Screw diameter: 200 mm Dsdpfx Aez Ngaxol Aeku Length from feed inlet to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed inlet height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: good (used), Year of construction: 1993, operating hours: 2,466 h, Brand: Leistritz AG Model: Micro 27/40 D Screw type: Twin screw Lhjbn Sm Hszu Nk Soqvjl Year of manufacture: 1993 Screw diameter: 27 mm L/D ratio: 40 Dsdpfx Alsz Egzyj Aoku Operating hours: 2,466

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions Dksdpez Nmfbefx Al Aeu • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins Dkodpfx Aszvn Dajl Aju - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Dedpfx Aljy Ufk Re Ajku Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.