Used Extruder for sale (406)

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Type: RH 801-1-90-30 with one screw D = 90 mm - 30 L/D equipped with ceramic heaters and cooling air fans DC motor, power 103 kW Year of manufacture: 12/1990 Known plasticizing capacity: 250 kg with PP granulate The plasticizing capacity depends on the material and shape Dksdpfew Np S Tex Ac Neh Fully functional

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation Djdpfxsuxa Abs Ac Nskh This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions. Dodpfx Ajiv H Ekec Nskh

Year of construction: 2026, condition: new, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. Dsdpeby Rfpefx Ac Nokh We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 1989, condition: reconditioned (used), functionality: fully functional, power: 5.5 kW (7.48 HP), operation weight: 2,100 kg, cylinder diameter: 100 mm, We are offering this refurbished KEMA PVPS 10 vacuum extruder, year of manufacture 1989. Dodpfxsx Urhcs Ac Nokh Manufacturer: KEMA Model: PVPS 10 Year of manufacture: 1989 Condition: refurbished Category ID: 34 Machine type: vacuum extruder If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Dedpex Tvcbofx Ac Nokh Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. Djdpfx Ajq Tr Tboc Nokh - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm Dksdpfx Acsq Tr T Rs Njh – Working hours: 64.082

Year of construction: 1993, operating hours: 104,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Screw Diameter 35mm Dkedpevl Hzgsfx Ac Njh Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine comes from 2008 and is in great condition. Brand: Kuhne GmbH Model: K 60E - 33D Type Screw: single screw Year of construction: 2008 Screw diameter Ø: 600mm L/D ratio: 33 cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm Dodpfsu Etygex Ac Nekh

Condition: excellent (used), Year of construction: 2013, screw diameter: 38 mm, This machine is in storage at Plastima Used Machinery Dkjdpfxovcqcco Ac Nsh

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Dksdjvbcbujpfx Ac Nsh Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Dedpfxex Sq I Nj Ac Nskh Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2016, condition: good (used), functionality: fully functional, Farmet FE500 extruder for soybean, other oilseed, grain, pet food etc, in good condition, complete with command box. Motor 55kw Djdexfc Uxjpfx Ac Nskh Capacity 500-750kg/h

Year of construction: 2020, condition: good (used), functionality: fully functional, Great offer! Extruder Farmet FE1000 Clever Max, ideal for texturate/pet food/ fish food/grain. With Clever command box, including PLC, frequency changer, touchscreen, SS steam conditioner and cutting head. Dkodpfx Acoxfcwme Neh Complete solution for manufacturing various products/mixtures. Capacity 1.000-1.800 kg/h Extruder was working for 2 years, the rest of accessories never used!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement Dsdsi Dtbuspfx Ac Nokh

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs Dkodpfx Aoi Dtbqoc Neh > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Dedpfjd Sg Hcex Ac Nekh Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Dkedji Dtb Ujpfx Ac Nsh Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Dkedpfx Ajiyx Uzec Noh Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled Dodpeiyya Asfx Ac Nokh You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) Dksdpfx Ajiyyndsc Neh > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Dkjdpfx Acjiyynws Njh Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) Dkedpfxod Sg I Is Ac Nsh OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Dedpfx Aeh Eyd Rsc Nskh Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.