Extruder

Weber DS 45

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Psdpfou Ttf Njx Apderc Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Prsdpfx Apjv Uz Awsdec

Condition: used, mileage: 90,000 km, power: 78 kW (106.05 HP), first registration: 07/2013, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 4,300 mm, loading space height: 2,095 mm, Year of construction: 2012, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, - First registration: Emission class EURO 5 - Facelift - Mileage: 90,000 km !!! We have at least 20 Iveco Daily vans with box bodies in stock at all times !!! !!! Reservations are not possible !!! 19% VAT can be shown Please, no emails – due to time constraints, we cannot process them. Thank you for your understanding! ---- Opening hours and further information: Viewings and purchases are possible without prior registration: MON - THU: 9:00 AM to 4:00 PM FRI: 9:00 AM - 1:00 PM SAT: 9:00 AM - 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch For questions: Christian Hirsch Please try again later, as we are often in a customer meeting. Further offers can be found at: ---- Iveco Daily with box body – body and through-access - VAT can be shown - 1st owner - Original mileage with proof Emission class: EURO 5 Psdpsvknxdefx Apdorc Environmental badge: green Previous owner(s): 1 Emission class: Euro 5 = Green badge - Air suspension - Reversing camera - LED interior lighting - Loading area length: 4.35m - Loading area width: 2.05m - Loading area height: 2.07m - Foldable passenger seat - Sliding door between driver's cab / loading area - Sliding door, right - Electric side mirrors (heated) - Central locking with remote control - Electric windows - front - Outside temperature display - On-board computer - Driver airbag - Electric immobilizer - ABS, ESP, traction control (ASR) For questions: For questions, Christian Hirsch or our friendly staff are available. For questions: Christian Hirsch 19% VAT can be shown / Net price - export possible. Further offers / opening hours: at / Further offers / opening hours: at / For questions: For questions, Christian Hirsch or our friendly staff are available. For questions: Christian Hirsch Further offers can be found at: The equipment was determined with the help of a VIN query; errors may occur due to technical reasons. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale are subject to change.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm Podpfjya Eldox Apdjrc COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Max. Sheet Width: 750mm Sheet Thickness Range: 0.35-2mm Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Main Motor Power: 110kw Prsdeyvh Ubspfx Apdoc Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Weight: About 15T

Year of construction: 1995, condition: good (used), functionality: fully functional, Bausano complete granulating line, including generator. Podpfx Ajzcarqepderc Output: 350-400 kg/h.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. Prodpoz A Sxlofx Apdjc We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: used, mileage: 98,000 km, power: 78 kW (106.05 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 03/2027, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Transmission damage. Prjdpfx Apozyv R Asdoc The Iveco Daily 35 is a versatile and practical van that is ideally suited for trades, service, assembly, and commercial transport. Its robust Daily platform provides a reliable foundation for daily work and makes it an attractive partner for companies that value functionality and immediate usability. Particularly impressive is the mileage of just 98,000 km. For a vehicle with initial registration in October 2012, this mileage is very attractive and makes the Iveco Daily 35 an interesting opportunity for businesses looking for a used van with manageable mileage. The 2,287 cm³ engine provides a solid basis for a wide range of transport and service tasks. The automatic transmission ensures additional comfort in everyday work. Especially during frequent delivery trips, in city traffic, or with many stops, the automatic transmission enables relaxed and comfortable driving. The already installed shelving system makes the vehicle particularly interesting for tradespeople, fitters, and service technicians, as tools, spare parts, and consumables can be stored in an organized and easily accessible manner. Sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Year of construction: 2005, condition: excellent (used), The designation TSHK160 refers to a rapid-heating mixer with a gross volume of 160 liters, while KGU400 describes a large-volume, universal cooling mixer with a gross volume of 400 liters. Both units are optimally matched to each other and enable a continuous, reproducible production process. - In ATEX design / explosion-proof - Bevel helical gear motor: 11 kW, n1 = 1300 rpm n2 = 104 rpm Motor IM V1 - Frequency controlled: 45kW 300/1500 rpm - Product-contacting parts: stainless steel 1.4541 - Hopper diameter: 300/200 x 350 Cooling mixer KGU400: - Capacity of the vessel KGU400: 391 liters - Capacity of the jacket KGU400: 45 liters - Min./Max. temperature TS. vessel and jacket KGU400: 5/95 °C - Min./Max. pressure PS. jacket KGU400: 0 / 0.5 bar - Test pressure PT jacket KGU400: 0.72 bar - Motor power: 11 kW High-speed heating mixer TSHK160: - Capacity of the vessel TSHK160: 210 liters - Capacity of the jacket TSHK160: 30 liters - Min./Max. temperature TS. vessel and jacket TSHK160: 0/158 °C - Min./Max. pressure PS. jacket TSHK160: 0/6 bar - Test pressure PT jacket TSHK160: 9.3 bar - Motor power: 45 kW - Working volume: 168 liters Pjdpfx Apeiup H Toderc Accessories: 1. Platform with stairs MSH 80 2.Temperature control unit 30 kW 3. Hopper 4. Control panel 5. Control cabinet 6. Dust filter DN 200/ 100 7.Dust filter DN 150/ 100 8.Technical doc. Message: It was used in a technical plant for wood chip and melamine resin additives.

Condition: excellent (used), Year of construction: 2004, Type Loedige TSHK-160/KGU-400 Serial no. 3901 Year of manufacturing 2004 Predevzzw Uopfx Apdsc Hot mixer 210 liters Cooling mixer 391 liters