Extruder

Xtrutech Extruder XTS 24

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Gbedpfx Anoiyyf Ij Rjl Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm Gbsdpfxjycuuys An Rjl • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Year of construction: 2022, condition: like new (used), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 RAFFRED. GMP150+2xPTUN2000 COOLING SYSTEM As good as new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following parts. - Hopper. - Holding frame. Gsdpfx Aevhb S Son Robl - Heating chamber. - Connection lines. - Air control valves.

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Gbsdpfjf S I I Hjx An Rol Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei Gbedpfsd S Uf Sox An Rel model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. • Screw diameter: 200 mm • with degassing zone Gbedpfjw Iu T Tsx An Rol • Drive power: 72.5 kW

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 Gbodex Dkmgepfx An Rel For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: ready for operation (used), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Gedpfx Aeu Ti Srjn Rebl Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet Gjdpfjvbcbuex An Robl PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Gjdeq R Tkwepfx An Rjbl Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300