Used Energy Production for sale (17,530)

Condition: used, machine/vehicle number: c24_68002, - Emergency power group - New unused - 1x 140 KVA 1x 110 KVA Hodpfx Asrmibpjgmsnn

Condition: ready for operation (used), Year of construction: 1997, Bottle washing machine, model Pac CB 12-0.5-V-7 L II Year of manufacture: 1997 Capacity: 6,000 bottles/hour Hnodszcgn Eepfx Agmsn

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Hodpfxezcf Dlj Agmonn Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, mileage: 53,682 km, power: 125 kW (169.95 HP), first registration: 12/2020, fuel type: diesel, empty load weight: 1,952 kg, maximum load weight: 948 kg, overall weight: 2,900 kg, wheelbase: 3,098 mm, color: grey, driver cabin: other, gearing type: mechanical, suspension: other, number of seats: 6, total length: 4,999 mm, loading space length: 1,500 mm, loading space width: 1,600 mm, loading space height: 1,350 mm, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, soot filter, traction control, trailer coupling, Double passenger seat, interior paneling, wooden loading floor, double cab, length type L1, height type H1, roadworthy, touchscreen, sun visor, partition wall, lumbar support, accident-free, heat-insulating glazing, clock & tachometer, iPad/iPod connection, metallic paintwork, 4-door, one previous owner, front-wheel drive, full service history, Euro 6d_TEMP, green environmental badge (4), new inspection, tinted windows (privacy glazing), steel wheels, breakdown kit, black, 6-speed transmission, passenger airbag, 2 airbags, sliding door on right, navigation with display, color monitor for navigation system, parking assist, rear parking sensors, front parking sensors, traction control, electric windows, radio, outside temperature display, tinted glazing, heated exterior mirrors, power steering, electric exterior mirrors, brake assist, speed limiter, comfort seats, third brake light, center armrest, German market version, new MOT/emissions test, passenger airbag with deactivation, tow bar, front and rear parking assist, cruise control, tailgate with window plus rear wiper and heated rear window, wooden floor in cargo area, air conditioning, full wheel covers, full-LED headlights with C-signature LEDs, electric windows, LED daytime running lights, start/stop system, adjustable steering column, multifunction steering wheel, onboard computer, Bluetooth hands-free kit, Bluetooth audio streaming, navigation, central locking with remote control, driver’s seat height adjustment, all-season tires, AUX port, USB port, DAB digital radio reception. Vehicle immediately available. Vehicle financing price on request. We are happy to offer you a customized financing or leasing package according to your preferences. Settlement of existing loans and trade-in of your used vehicle possible. Nationwide registration service available = price on request. Nationwide vehicle delivery available = price on request. Warranty or extended warranty for any vehicle = price on request. Hodpfx Aexflkpsgmonn

Condition: used, J-Tec product silo discharge cabinet Made entirely of stainless steel Equipped with a pneumatic bunker vibrator and level sensor Hnjdpfx Agjzcd Ezemon See our other listings VMA Wekerom

Condition: excellent (used), in excellent condition Hodezcdq Djpfx Agmonn

Year of construction: 2021, operating hours: 5,000 h, condition: used, functionality: fully functional, EPS Complete Production Line For cutting and packaging EPS blocks: Model: VIRO HV Q-4 Y 2021, Price: €459,000 Includes a side scrap handling unit, bale/bundle packaging unit, bale marking and paint marking unit for color-coding bales, and a separate dust compaction unit for stack formation. Also includes a weighing unit, automatic block tilting, automatic cutting wire adjustment, optional manual removal, and a semi-automatic equipment group for producing bales with a minimum size of 50x100 cm and for creating stacks. Designed for handling blocks 3-4 meters long. Used for 5,000 operating hours. In like-new condition. EPS Block Molding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production equipment, automatic operation, with mixing of fresh and recycled materials. Reliable, accurate, and easy to operate. Used for 18,000 operating hours. EPS Pre-Expander: Y 2008 Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expansion equipment with automatic weighing and fluidized bed. Reliable, precise. Used for 18,000 operating hours. Steam Boiler Y2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Hnodpfx Aezcdqqsgmon Operating pressure: 12 bar Checked pressure: 19.4 bar Reliable, continuously maintained. Used for 18,000 operating hours.

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: KAC50DP-BC100DE, KSTAR BC100DE rechargeable Li-ion battery system (LiFePO4) with a nominal voltage of 512 Vd.c. and a rated energy of 102.4 kWh. Specifications: Hjdszcb Srspfx Agmenn Brand: KSTAR Model: BC100DE Battery type: LiFePO4 Rated capacity: 200 Ah Nominal voltage: 512 Vd.c. Rated energy: 102.4 kWh AC input: 230 Va.c., 50 Hz, max. 11 Aa.c. Operating voltage range: 456–576 Vd.c. Max. discharge current: 50 Ad.c. + 50 Ad.c. Max. charge current: 50 Ad.c. + 50 Ad.c. Protection degree: IP54 Protection class: I Production date: 2024-03-06 Serial No.: 210350003E243837 / 00001 Condition: Condition: used

Condition: good (used), Line now available for immediate sale. Was producing thins for supermarket contracts. Hnedpfswhagmox Agmon

Condition: not inspected (used), Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Hodpjzawizefx Agmjnn Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: JSUP-1703, PAPER STRAW PRODUCTION LINES FOR BEVERAGE CARTONS (U-SHAPE & I-SHAPE) Location: Poland (European Union) Manufacturer: Zhejiang Jinshen Machinery Manufacture Co., Ltd. Year of Manufacture: 2023 Condition: Excellent – Installed, commissioned, tested and fully operational Availability: Immediate Complete Turnkey Production Solution for Beverage Carton Paper Straws Unique opportunity to acquire two nearly new production lines for paper straws used in aseptic beverage cartons (milk, juice and beverage packaging). The equipment was professionally installed and successfully commissioned in Poland. All machines are fully functional and available for immediate inspection. Line 1 – U-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Flexible straw forming machine JSFP-2021-30 U-shape automatic packing machine JSUP-1703 Microwave dryer 2 × circulation heaters Carton filling machine Conveyor assembly line Vision inspection system Capacity: up to 600–800 pcs/min Suitable for beverage carton applications requiring individually packed U-shaped paper straws. Line 2 – I-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Microwave dryer Vision inspection system I-shape straw packing machine 2 × carton filling machines Capacity: up to 800–900 pcs/min Designed for straight paper straws used in beverage carton packaging systems. Advantages ✅ Machines located in the European Union ✅ No waiting time for production in China ✅ No import duties or overseas shipping delays ✅ Installed and successfully tested ✅ Immediate availability ✅ Modern Delta PLC control systems ✅ Vision inspection systems included ✅ Suitable for food-grade production Technical Highlights Straw diameter: 3.0 – 8.0 mm Production speed: up to 100 m/min PLC control: Delta HMI touch screens Hnedszb Uwlepfx Agmen Ethernet communication Automatic counting and monitoring Food-grade manufacturing standard Remote maintenance capability Ideal For Paper straw manufacturers Beverage packaging suppliers Dairy packaging producers Contract packaging companies Investors entering sustainable packaging markets Sale Options Complete package (both lines) U-shape line separately I-shape line separately Inspection The equipment can be inspected under power at our facility in Poland. Additional photos, videos, technical documentation and machine specifications are available upon request. Contact METALTON Sp. z o.o. Poland For detailed information, pricing and viewing appointments, please contact us directly. Keywords: Paper Straw Machine, U Shape Straw Machine, I Shape Straw Machine, Tetra Pak Straw Production Line, Beverage Carton Straw Line, Paper Straw Packaging Machine, Sustainable Packaging Equipment, Straw Manufacturing Line, Beverage Packaging Machinery.

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW - Spindles adjustable up/down, left/right - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm Hnedpfx Ajyyy Egjgmjn - Dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 2.750 kg Hnedpfey Evkcjx Agmon Dimensions of cargo space: 105 x 160 x 205 cm Frequency: 50 Voltage: 400 Please contact Team DPX for more information

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm Hnsdpfxezatlfj Agmon + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: like new (used), Year of construction: 2020, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. The units of the production line: 1. ￠150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers*12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC Hnodpfx Ajy Exrpsgmjn If you are interested, we will send you a detailed description and data.

Condition: ready for operation (used), Year of construction: 2015, Complete hamburger production line by VEMAG Manufacturer: VEMAG Maschinenbau GmbH – Germany Line model: Roobot 500 + FM250 + SC261 equipment set Condition: Used, very good Year of manufacture: 2015 / 2020 Set description The VEMAG hamburger production line is a fully automated system designed for forming, portioning, and arranging meat, poultry, fish, or vegetable-based burgers. The equipment provides high throughput, precise portioning, and excellent shape consistency while maintaining a high standard of production hygiene. The line consists of three main components: 1. VEMAG ROOBOT 500 filling machine (year 2015) Automatic feeding system – the main drive of the line. Controls the movement and dispensing of the filling into the forming machine. Equipped with a feeding system with precise portion control. Ensures consistent output and accurate weight. Made of stainless steel with a hygienic design suitable for high-pressure washing. Key technical data: Output: up to 6000 portions/hour (depending on the raw material) Portion range: 20 to 300 g Drive: electric / pneumatic Hedozb I Ecopfx Agmenn 2. VEMAG FM250 (year 2020) Burger forming machine – the newest component of the line. Forms burgers, patties, meatballs, vegetable products, and fish products. Variable shape and thickness – quick die changes are possible. Integrated system of forming plates with adjustable size. Ideal for precise forming of high-quality surface products. Technical data: Burger diameter: 60–130 mm Output: 100–180 cycles/min Material: stainless steel AISI 304 Works in conjunction with Roobot 500 3. VEMAG SC261 (year 2015) Belt conveyor / separator: Collects the formed products and arranges them in rows. Variable belt speed and transport direction. Easy to disassemble and clean. Technical data: Material: stainless steel Control: electronic, compatible with FM250

Condition: new, Year of construction: 2026, SPIRAL DUCT PRODUCTION MACHINE Metformer MTF 1602 TUBE FORMER Designed for the production of round SPIRAL-type ducts. The produced duct complies with DIN EN 12237, Features: Coil decoiler with vertically adjustable brake Forming strips for duct production Burr-free high-speed cutting with circular cutting blades LCD touchscreen control Automatic lubrication system Automatic cutting during duct production Production reporting system (daily-weekly-monthly output) Automatic error detection Technical Data: Diameter range: 80–1600 mm Thickness range: Galvanized steel: 0.4–1.2 mm Stainless steel: 0.4–0.7 mm Aluminum: 0.4–1.3 mm Hsdpfx Aswa Skhjgmsnn Strip width: For 0.4–1.0 mm thickness: 137 mm For 1.1–1.3 mm thickness: 140 mm Production speed: 60 m/min Motor power: 11.25 kW Beading: Smooth, single or double Lock: External lock Cutting system: Circular cutting system Weight: 2900 kg Machine dimensions: 1900 × 2050 × 1500 mm Decoiler dimensions: 1780 × 1130 × 1250 mm Table dimensions: up to 2700 × 950 × 1200 mm Operating Environment: Power supply: 3-phase, 380V, 50Hz Clean surroundings Maximum ambient temperature: 40°C Minimum ambient temperature: -5°C Humidity: 55–85% Altitude:

Condition: new, A first in Turkey; Our company carries out the production of the machines that enable the production of single-layer insulated panels, under our own patent and license. Our sandwich panel machines operate in 30 different regions of the world. Single layer insulated panels are also called economical eco sandwich panels. Please contact us for additional information and technical documents. Hjdpfx Asf Nqlqjgmjnn

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA – Double-sided profiling machine - length of moulding 180 – 850mm - width of moulding 30 – 75mm - thickness of moulding 10 – 45mm - spindle diameter 30mm - max. cutter diameter 250mm - 4 cutters included 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of dust extraction nozzle 5x100mm - dimensions (L/W/H) 1900x2230x1530mm DDGA – Four-sided planer - width of workpiece 35 – 130mm Hnjdpfxezabhbe Agmjn - thickness of workpiece 10-60mm - min. length of workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of chain via oil pump - diameter of dust extraction nozzle 4x120mm - dimensions (L/W/H) 3200x1370x1830mm DBCA – Profiling machine feeder - max. feed rate 40m/min - max. width of moulding 150mm - motor 0.55kW - overall dimensions (L/W/H) 2320x600x1150 DBGA – Moulding feeder - length of mouldings 200-600mm - width of mouldings 30-20mm - thickness of mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions (L/W/H) 1500x500x980mm - total weight approx. 4900kg Net price: 63900 PLN Net price: 15200 EUR depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer.

Condition: used, Year of construction: 2010, functionality: fully functional, total length: 4,500 mm, total width: 1,300 mm, total height: 1,400 mm, type of input current: three-phase, CEFLA Sorbini SmartParquet Flooring Oiling Line + Aerotherm UV Dryer For sale: A complete set of machines for oiling wooden floors, consisting of: * CEFLA Sorbini SmartParquet oil applicator and spreading system * Aerotherm UV drying tunnel (UV dryer) This line is designed for finishing and oiling wooden floors, parquet, and engineered boards. --- Technical Data CEFLA SORBINI Oiling Line (SmartParquet): * Dimensions: 4500 × 1300 × 2000 mm (L × W × H) * Weight: approx. 1400 kg Aerotherm UV – Drying Tunnel, Dryer: * Dimensions: approx. 3000 × 1200 × 1400 mm * Weight: approx. 400 kg --- Adjustable speed settings for all working components: * Application rollers * Brushes * Pads * Feed Technical condition: Very good, in continuous operation Reason for sale: Sale only due to purchase of a new processing line. --- Additional Information * Machines can be inspected live during operation Hnsdsx Rb Hmspfx Agmen * A demonstration video of the line in operation can be provided upon request * Assistance with loading available

Condition: used, PUMP, Alfa Laval Type MR-200A Hodoyv Ey Uopfx Agmonn Q – 35 m³/h Pressure 14 mwc Self-priming pump

Condition: used, Year of construction: 2000, Storage location: Nattheim Hjdpfx Agevwdmwjmjnn

Condition: not inspected (used), Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm Control Weinig PC-Nexus # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Hsdpfx Ajyyqm Isgmonn Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: va...

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Hedpfx Agew Ry U Ismenn

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Hsdpfey Ur Hlsx Agmenn Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522