Used Emco Super 11 Cd for sale (135)

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Rcodpfoxapdcex Ahcef Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: new, Year of construction: 2026, functionality: fully functional, turning length: 480 mm, turning diameter over cross slide: 300 mm, turning diameter: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 7,000 rpm, spindle bore: 45 mm, travel distance X-axis: 160 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 510 mm, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (max.): 6,000 rpm, feed rate Y-axis: 15 m/min, total height: 1,985 mm, total length: 2,680 mm, total width: 1,950 mm, bar diameter (max.): 45 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, FANUC 31iT Plus CNC control iManual Guide 15" TFT Touch Screen 2 SAUTER turrets with 12 positions for radial VDI 25 driven tools Y-axis travel: +40/-30 mm Main and counter-spindle power: 15 Kw Main and counter-spindle nose: ASA 5" Bar capacity: 45 mm CE marking MACHINE COMPLETE WITH: - Chip conveyor - 2 high-pressure coolant pumps (14 bar) - Installation materials - Part washing gun - 3D machine model in .stp format - INDUSTRY 4.0 READY package - Part catcher for bar machining - Bar feeder interface - Machine status lamp Rsdpfxezcfb Ds Ahcscf - Tool load monitoring - MARPOSS tool pre-setter - 2 foot pedals for opening/closing the main and counter-spindle - 2 pumps for high-pressure coolant (24 bar) - Electrical cabinet air conditioner

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turning and milling parts, equipped with integrated spindle motors (ISM) on both main and sub-spindle, featuring a thermal compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Sub-spindle: 22 kW Speed range: Main spindle: 0-5,000 rpm Sub-spindle: 0-7,000 rpm Spindle interface (DIN 55026): Main spindle: KK6 (max. bar capacity 65 mm) Sub-spindle: KK6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute resultant cutting forces over two axes, providing exceptional rigidity for all machining operations. All linear axes feature preloaded roller guides, a digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D control. Includes: * Hollow clamping cylinder with draw tube * Parts ejector and flushing system through the sub-spindle * 2 x 12-position VDI 30 tool turrets, radial mounting with direction logic, accommodating up to 2 x 12 driven tooling stations * Swivel speed adjustable via feed selector Performance data: Max. 6.7 kW at 2,650 rpm Constant torque: 25 Nm Speed range: 0-5,000 rpm - C-axis for main and sub-spindle - TRANSMIT software for simple C-axis programming * Finished parts unloading device * Sinumerik 840D * Chip conveyor with programmable discharge height of 1,200 mm (hinged belt type) * Integrated coolant system in the chip conveyor: 2 high-pressure pumps at 14 bar 2 rinsing pumps at 3.7 bar * Electrical cabinet cooling unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Documentation Rcjdpey Svz Iefx Ahcef IMPORTANT: Export/re-export from the EU requires an export license R7AW2001 – Year of manufacture: 2008 Including: S6Z170 PC keyboard Siemens R7Z460 Machine installation and mounting hardware X1Z100 EMCO standard bar feeder interface R7Z030 Alarm lamp R7Y750 Finished part transfer conveyor, crosswise S6Z900 EMCO TOPLOAD 10-65/3300 R7Z620 Automatic tool setter – HT665 S6Z110 Setting gauge VDI 30 + Various static and driven tool holders + Clamping devices for main spindle and sub-spindle

Condition: good (used), Year of construction: 2011, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: S6CZ1151, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 29,000 W, bar passage: 65 mm, Equipment: bar feeder, documentation/manual, Year: 2011 Redpfexwp I Asx Ahcecf Operating hours: 4,700 h (increasing) Turning diameter: 65 mm CNC type: Fanuc 18i-TB Number of turrets: 1 Axes: X, Y, Z, and C Number of turret stations: 12 Number of driven stations: 12 Main spindle and sub-spindle speed: 5,000 rpm Main and sub-spindle motor power: 29 kW Dimensions (L × W × H): 3,302.0 × 2,057.4 × 2,032.0 mm Weight: 5,700 kg Chip conveyor IEMCA MASTER 880r Verso bar feeder (3 m bar + loading magazine) Numerous fixed and driven tool holders included in the sale: _Axial driven tool holder: 3 _Radial driven tool holder: 4 _Swivel driven tool holder 0–90°: 2 _Fixed turning tool holder: 5 _Fixed drilling tool holder: 7 _Cut-off blade holder: 1 2 sets of chucks for jaw passage (main spindle and sub-spindle). The machine is currently in use but can be made available within 4 weeks. The machine is to be collected on site (Saint Pierre en Faucigny). Loading and transport costs are at the buyer’s expense.

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 Rcedpfxsqn A Rrs Ahcef coolant ja chip conveyor ja kW generator - rated current 110 A connected load 56 kW

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Rcodpfjxp Iyhjx Ahcof Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: excellent (used), With DRO Working travels 300 x 200 x 350 mm Table size 600 x 200 mm Spindle taper for collets ISO 30 Spindle speeds 80-2'200 rpm Rodpsy Iz Rmefx Ahcscf Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), EMCO Easy Cycle control Working travels 450 x 350 x 400 mm Table size 800 x 400 mm Boring and milling head turnable + / - 90° Spindle taper SK40 Rcedpsy H Di Aefx Ahcef Spindle speeds 10-5'000 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2000, Technical details: turning diameter: 360 mm Rcodsx Dcgxepfx Ahcof turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Rodpjy Hty Djfx Ahcscf • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW Rsdpfsx Aq Hkex Ahcjcf weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m Redpfx Aeu N Avxehcecf The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, bar diameter (max.): 26 mm, total width: 2,200 mm, total height: 2,200 mm, travel distance X-axis: 78 mm, travel distance Y-axis: 210 mm, overall weight: 2,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with EMCO specials, number of axes: 4, This EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details. • Condition: Very good; connected and ready for testing • Tech specs: • Swing above slide: 160 mm • Main spindle to counter-spindle: 408 mm • Max. turning diameter: 100 mm • Max. part length: 600 mm • Max. bar-stock diameter: 26 mm • Travel: • X/Z: 78 mm • Main spindle: • Max. torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (front ID): 60 mm • Spindle bore: 38 mm • Counter-spindle: • Speed range: 0–5000 rpm • Torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (ID): 60 mm • Clamp length (Ø26 mm): approx. 100 mm • Travel (Z2): 233 mm • C-axis: • Resolution: 0.001° • Rapid traverse: 1000 rpm • Positioning: 3° • Drive power: • Power: 9 kW • Tool changer: • Tool stations: 2 × 12 • VDI shaft: VDI 16 • Tool size (square): 16 × 16 mm • Boring bar diameter: 25 mm • Indexing time: 0.4 sec • Driven tools: • Speed range: 0–5000 rpm • Max. torque: 3 Nm • Max. power: 1.6 kW • Number of tools: 2 × 4 • Feed drives: • Rapid traverse X/Z; X1/Z1: 12/20 m/min • Feed force X: 3000 N • Feed force Z: 3000 N • Acceleration time: 0.1 sec • Coolant system: • Tank capacity: 200 L • Pump power: 0.57 kW • Power consumption: Rsdsy E Sp Uspfx Ahcjcf • Connected load: 15 kVA • Supply pressure: 6 bar • Supply rate: 300 L/h • Dimensions: • Center height (top/bottom): 1179 / 1030 mm • Footprint (W × D): 2200 × 1386 mm Additional equipment • Set of accessories and tool holders included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt driven): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) Rjdpfx Ahsy Enr Eococf • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: used, functionality: fully functional, very good condition Rodpfxoymnkve Ahcecf

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,941 h, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This EMCO Emcoturn 325 features a 3-phase supply voltage of 400 V and a rated current of 9.5 A. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 325 machine we have for sale. Contact us for further details. Rjdpfoy A Hw Usx Ahcscf • Supply voltage: 400 V • Phase: 3-phase (3/PE – three phases + protective earth) • Frequency: 50/60 Hz • Rated current (IM): 9.5 A • Maximum current (Imax): 18 A • Short-circuit current (Ik): 6 kA • Duty cycle: S6 – 40% Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions Redpfx Aeyz Dg Dshcecf

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Rsdpfx Ahovt Amuececf Coolant system

Condition: used, Year of construction: 2012, turning diameter 550 mm turning length 1500 mm Redpfxjy N D Sie Ahcscf control Fagor 8055 x-axis 108 mm z-axis 3000 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2DU2101, CNC lathe with main and sub spindle, featuring two 12-position turrets and double bar feeder. Make: EMCO, Model: TURN 332MC Plus Year of manufacture: 2006, Serial number: R2DU2101 Control system: Siemens Maximum turning diameter: 220 mm ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment plan, or individual financing model – together, we will find the solution that fits your needs. Upon request, we can also arrange complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so that you do not have to worry about a thing. Rcedpfx Ajyzn U Eohcof 📞 Feel free to contact us for more information or a non-binding quote. We provide personal and professional advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: S4ES_V16, CNC lathe with main spindle and 12-position turret Make: EMCO, Model: EMCOTURN E45 Year of manufacture: 2019, Serial number: S4ES_V16 Control: Siemens, type Sinumerik 828 Maximum turning diameter: 220 mm Chip conveyor: Manufacturer Bürener, type SPE62/12 ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your needs. Whether down payment, installment payment, or custom financing models – together we will find the right solution. On request, we also take care of the entire transport organization. From planning to reliable delivery, we ensure a smooth and on-time process, so you don't have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding quote. We provide personal and competent advice. Rcedpfxjyzn Tno Ahcsf Subject to prior sale, modifications, and errors!

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R2EU2002, CNC lathe with main spindle and 12-station turret Manufacturer: EMCO TURN E45 Year of manufacture: 2002, Serial number R2EU2002 Control: Siemens, Sinumerik type Bar feeder: EMCO Compact Load E45 Turning diameter: 220 mm Rcedoyzn N Njpfx Ahcef Chip conveyor: Knoll Attractive offer – flexible & hassle-free We offer not only a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you. Upon request, we can also take care of the entire transportation process. From planning to reliable delivery, we ensure a smooth and on-schedule operation so you don’t have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We offer personal and competent advice.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: R6L211501, EMCO Turn S65 TM – 2-axis CNC lathe with EMCO SL1200 short bar loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4,200 rpm spindle speed - Linear guideway system - Digital drive technology - Direct spindle encoder - Sinumerik 828D with ShopTurn conversational programming Equipment - 12-position VDI 30 axial tool turret with direction logic for up to 12 live tooling stations (5 kW, 20 Nm, 0–5,000 rpm) - C-axis for main spindle - Mechanical spindle brake (minimum increment 0.01°) - Size 65 headstock with KK6 spindle nose (DIN 55026) - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Hydraulic power unit - Interface for chip conveyor - Documentation Other features - EMCO SL1200 short bar loader ----- Rcsdpfxjyzn H Uj Ahcef Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing solutions adapted to your needs. Whether down payment, installment plans, or individual financing models – together we will find a solution that fits. If you wish, we can also handle the complete logistics and transportation. From planning to punctual delivery, we ensure a smooth and reliable process, so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide personal and professional advice. ----- Subject to prior sale, errors, and changes.

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes Rcsdpfx Ahed I R E Njcof • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic Rcedpewkpzljfx Ahcef • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package