Used Ema 201 for sale (4,644)

Condition: excellent (used), Catalogue number 7689 Dsdeyarazjpfx Aaaeup TECHNICAL SPECIFICATIONS - Tool diameter: 16mm - Maximum drilling depth: 160mm - Maximum milling length: 160mm - Adjustment of drilling unit: forward/backward, up/down and sideways - Working table dimensions: 600x320mm - Material clamping system - Motor power: 2.2kW - Dimensions (L/W/H): 950x740x1330mm - Weight: 283kg ADVANTAGES – Made in Poland – Very good condition – Used drilling machine Net price: 6300 PLN Net price: 1500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: Djdpfoyaq Nhex Aaaoup - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 2014, clamping force: 6,500 kN, Demag System 200/500 Dodeyn Acpjpfx Aaasup This Sumitomo Demag injection moulding machine Systec 650/1020-2300 from 2014 is being auctioned—including the conveying system and a hot stamping unit—in our industrial auction, "Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo," taking place in Babenhausen until 10.03. The auction is held on our RESTLOS online platform. Machine inspections can be scheduled by appointment for Monday, 09.03.2026 from 10:00 to 11:00 am. Further details about the machine: Complete large-scale injection moulding system, consisting of a Sumitomo (SHI) Demag injection moulding machine, Sepro top-entry linear robot, Stäubli clamping and coupling systems, hot stamping/foil transfer station, as well as comprehensive temperature control and conveying equipment. Technical data Injection moulding machine Manufacturer: Sumitomo (SHI) Demag Model: Systec 650/1020-2300 Year of manufacture: 2014 Machine number: 80930051 Control unit: NC5 Plus Clamping force: 6,500 kN (650 t) Tie-bar distance: 1,020 mm Injection unit: 2300 Screw diameter: 60 mm L/D ratio: 20 : 1 Voltage: 400 V / 50 Hz Operating hours: PLC: approx. 103,846 h Drives: approx. 50,889 h Heater: approx. 71,072 h Machine cycles: approx. 4,942,086 Linear Robot / Part Handling Manufacturer: Sepro Robotique / Sumitomo Demag Model: S5X-35 Year of manufacture: 2014 Weight: approx. 711 kg Max. pressure: 7 bar Type: top-entry linear robot (X, Y, Z axes with rotary axes) Operation: Sepro teach pendant / Integration into NC5 control Further automation components - Stäubli QMC122 magnetic quick-clamping plates (2 units) - Stäubli multi-coupling systems for media connections - Stäubli industrial robots (TX/RX series, handling) - Hot stamping/foil transfer station with rotary table and Siemens SIMATIC HMI - Priamus FillControl process monitoring system - Gammaflux hot runner controller - Dr. Escherich ESUC 81 ionization/cleaning unit Temperature control & material handling - Multiple Wittmann Tempro plus D140 temperature control units (approx. 10–12 units) - Chilled water manifold plates with flow indicators - Koch Technik H565 material loader - Koch Technik SGM01 metal separator Conveying equipment - M.A.i conveyor belt for part discharge - VTW conveyor belt for sprue discharge Key components overview: - Sumitomo (SHI) Demag Systec 650/1020-2300 injection moulding machine - Sepro S5X-35 linear robot with control system - Stäubli quick-clamping and coupling systems - Hot stamping/foil transfer automation cell - Process monitoring system (Priamus) - Hot runner control (Gammaflux) - Wittmann temperature control units - Koch material handling equipment - Part and sprue conveyor belts Notes - Please make use of the inspection appointment - Without moulds, materials, and decorations unless explicitly mentioned - Dismantling and loading to be handled by the buyer - Sold as pictured; functionality untested - Does not include any other items that may be shown in images - Completeness not verified.

Condition: used, Year of construction: 2002, clamping force: 1,500 kN, This Demag Ergotech injection moulding machine 1500-440, built in 2002, equipped with a Krauss Maffei robot and a CO₂ marking laser, is being auctioned in our industrial auction “Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo” in Babenhausen until 10 March. The auction takes place on our RESTLOS online platform. Further details about the machine: Injection Moulding Machine Manufacturer: Demag Model: Ergotech 150/500-440 System Year of manufacture: 2002 Clamping force: 1,500 kN (150 t) Screw diameter: 35 mm Control system: Demag Ergocontrol NC4 Hydraulic pressure: 190 bar Oil capacity: approx. 126 l Connection: 3 × 400 V / 50 Hz Machine weight: approx. 7,500 kg Operating hours: approx. 191,722 h Machine cycles: approx. 26,432,927 Industrial robot Manufacturer: KraussMaffei / Yaskawa Motoman Model: HP20 Year of manufacture: 2011 Design: 6-axis articulated robot Control system: Motoman NX100 Laser marking system Manufacturer: Robot Technology GmbH Type: CO₂ laser marking Year built: 2011 Laser output: up to 30 W Connection: 3 × 400 V / 230 V Power consumption: approx. 2 kVA Scope of delivery - Demag injection moulding machine Ergotech 150/500-440 - 6-axis robot KraussMaffei / Yaskawa HP20 with control system - Robot safety cell / clean room enclosure - CO₂ laser marking system - Conveying technology / discharge and cross conveyor belts - Linear positioning units - Pneumatic pressure amplifier / compressed air booster - Temperature control and media connections Dujdpfx Aeynz R Ejaajp Notes - Please make use of the inspection date - Without tooling, materials, or decorations unless expressly stated - Dismantling and loading by the buyer - Sold as pictured, functionality not tested - Without any other items possibly shown - Completeness not verified.

Condition: used, Year of construction: 2005, Demag System 200/500 This DEMAG injection moulding machine System 200/500-440, built in 2005, is being auctioned in our industry auction "Injection Moulding Machines - DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is taking place on our RESTLOS online platform. Further details on the machine: Complete injection moulding system with robotic automation, consisting of Demag injection moulding machine, Yaskawa 6-axis robot, laser marking system, screen printing station, conveyor technology, and temperature control units. Technical data Injection Moulding Machine Manufacturer: Demag Ergotech Model: System 200/500-440 Year of manufacture: 2005 Clamping force: 2000 kN (200 t) Injection unit: 440 Control unit: Ergocontrol C-Dias Connection: 3 × 400 V / 50 Hz Machine weight: approx. 7.7 t Operating hours cannot be read (counter unit was not powered) Industrial Robot Manufacturer: Yaskawa Motoman Model: MH6 Year of manufacture: 2010 Payload: 6 kg Control unit: DX100 Laser Marking System Dedpfxjynzx Nj Aaaoup Manufacturer: Robot Technology GmbH Model: FLACS.MARK 30W Year of manufacture: 2018 Scope of supply - Demag injection moulding machine - Yaskawa Motoman MH6 robot with control - Robot safety cell - Laser marking system - Screen printing station - Conveyor / part handling technology - 2 temperature control units - Stäubli quick-change system QMC 121 - Kistler mould pressure measuring system - Industrial vacuum cleaner Notes - Please use the inspection date - Without tools, materials, and decoration unless expressly mentioned - Dismantling and loading by purchaser - As pictured, functionality untested - Without any other items possibly shown - Completeness unverified.

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Dujdpfx Aev Uvvfjaajp Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock!

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term Dujdpfxjynu A Ue Aaajp

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- Duedpeyrxwwefx Aaajp # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, TECHNICAL DATA Dedpfx Aaox Elf Aeajup MACHINE SPECIFICATION WORKING RANGE • Max chuck diameter. 260 mm • Max swing diameter. 260 mm • Max machining diameter. 220 mm • Max part length. 110 mm • Travel X axis. 570 mm • Working stroke Z axis. 250 mm • Travel Z axis. 200 mm CLOSED STANDARD AUTOMATION • Number of carrier frames for workpiece diameter 80 to 220 mm. 14 pieces • Number of carrier frames for workpiece diameter 30 to 160 mm. 18 pieces • Number of carrier frames for workpiece diameter 30 to 85 mm. 30 pieces • Max total load. 120 kg PICK UP SWITCH POINTS • Pressed. 1 mm • Over pressed. emergency stop. 5 mm • Pickup spring travel max. 30 mm CHAIN SYSTEM • Chain length. 182 inches • Chain pitch. 1 inch (25.4 mm) • Chain tension at 20 carrier frames. 400 N • Chain wheel. Z equals 30 • Gear ratio. i equals 100 • Motor revolution per belt revolution. 540 LOADING TIME • Loading time. 2 to 4 seconds MAIN SPINDLE • Spindle flange according to DIN 55026. Size 6 • Spindle bearing front diameter. 110 mm • Max spindle speed. 4500 rpm (5500 optional) MAIN DRIVE. AC ASYNCHRONOUS MOTOR. TYPE 1MB241H • Power at 100 percent duty cycle. 18 kW • Power at 40 percent duty cycle. 27 kW • Torque at 100 percent duty cycle. 202 Nm • Torque at 40 percent duty cycle. 303 Nm • Corner speed. 850 rpm FEED DRIVE • Rapid feed speed X axis. 60 m per minute • Rapid feed speed Z axis. 30 m per minute • Feed force X and Z. 5.5 kN • Ball screw diameter X and Z. 40 mm • Acceleration. 5 m per second squared TOOL CARRIER • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max tool length including holder. 190 mm • Max swing diameter. 740 mm TOOL CARRIER WITH DRIVEN TOOLS • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max speed. 6000 rpm • Corner speed. 3000 rpm • Max torque at 10 percent duty cycle. 45 Nm • Max torque at 40 percent duty cycle. 30 Nm • Max torque at 100 percent duty cycle. 15 Nm ELECTRICAL EQUIPMENT • Operating voltage. 400 to 480 V • Control voltage DC. 24 V • Control voltage AC. 230 V • Frequency. 50 or 60 Hz • Connected load. 42 kW • Supply fuse rating. 63 A • Electrical design standard. VDE 0113 DIMENSIONS AND WEIGHT • Length. 2680 mm • Length including chip conveyor. 3820 mm • Width. 2040 mm • Height. 2400 mm • Machine weight. approx 6500 kg NOISE EMISSION • According to DIN 45635. • Measured sound pressure level. 78 dB(A) during continuous cutting on a cylindrical test part.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Duedpfeyc H I Sex Aaajp Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Duedpfx Aajynpc Noaep Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, Demag Hoist P625 H12 - 5 Ton - Hoisting height: 8 m - Year of construction: 1973 – Speed: 8/0.8 m/min - Including wheel set Demag Hoist P212 H11 - 5 Ton - Hoisting height: 5 m - Year of construction: 1975 – Speed: 4 m/min Demag Hoist DH1040 H16 - 8 Ton Djdpfx Aaeyrr Iceasup - Hoisting height: 16 m - Year of construction: 1989 - Speed: 8/0.8 m/min Demag Hoist P625 H8 - 10 Ton - Hoisting height: 4 m - Year of construction: 1970 - Speed: 4 m/min - Including wheel set Total: 4 units

Condition: used, Year of construction: 2017, We offer this used Brema Muster 800A flake ice maker, year of manufacture 2017. Manufacturer: Brema Model: Muster 800A Year of manufacture: 2017 Condition: used Dusdpfsyrrrzjx Aaasp Machine type: Flake ice maker – 900 kg / 24 hours If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2019, max. workpiece diameter 400 mm max. workpiece length 300 mm control FANUC travel -x axis 995 mm travel -z axis 580 mm max. turning speeds 2.850 U/min no. of tools in turret 12 Stk./pcs. driven tools turning speeds 6.000 U/min Vertical Turning Machines | 2 x EMAG VL 8 equipped with driven tools and Track Motion TM loading system Both machines show the following operating hours: - Power-on hours: approx. 16,300 hrs - Spindle hours: approx. 9,950 hrs An extensive package of tools and clamping equipment is included in the scope of delivery. Dodpfx Aaeynnuwoaoup The machines are in very good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL8 | VL-8

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Hersteller: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Dedpjxhfuaefx Aaajup Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Dedpjw D Aybefx Aaaoup

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier Duodpfxexzi S Ne Aaaop

Condition: good (used), Year of construction: 2013, Fanuc Oi-TD CNC control 12-fold turret head (VDI 30 taper) collet chuck device C-axis driven tools tailstock coolant device chip conveyor With the machine are 6 driven tools, some fixed tool holders, 3-jaw chuck and collets Dusdpsp T Uxxsfx Aaasp Technische Daten / technical details: max. Umlaufdurchmesser über Bett / max rotary diameter over bed 460 mm max. Umlaufdurchmesser über Schlitten / max rotary diameter over sledge 328 mm max. Drehdurchmesser / max. turning diameter 303 mm max. Drehlänge / max. turning lenght 334 mm Planweg (x) / cross way (x) 181 mm Längsweg (z) / longitudinal way (z) 390 mm max. Stangendurchmesser / max bar diameter 52 mm Drehzahlbereich / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang x,z / rapid feed x,z 30,30 m/min Antriebsleistung Spindel / drive capacity spindle 9/11 kW Gewicht der Maschine ca. / weight 3000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2013, Compact and professional strapping machine with internal frame dimensions of approximately width 650 x height 400 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward spool change and threading system. - Secure strapping with 12 mm strap width. - Up to approx. 25 strapping cycles per minute possible. - Continuously adjustable strap tension. - Start via button or optionally automatic mode (sensor in the tabletop). - Automatic strap feed. - Automatic strap ejector. - Sealing method: heat-welded using the hot knife process. - Equipped with ergonomic rollers on the table surface. - Machine can be moved via swivel casters. - 230 V / 50 Hz. Dodpfx Aaoyrf Uceaoup The machine can be demonstrated under power.

Condition: not inspected (used), functionality: unexamined, overall weight: 250 kg, spindle speed (max.): 3,200 rpm, table length: 230 mm, table width: 230 mm, No minimum price – guaranteed sale to the highest bidder! Dedpfxsym T Tis Aaasup Placing a bid obliges you to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 1,450 rpm Spindle speed: 500–3,200 rpm Table dimensions: 230 x 230 mm MACHINE DETAILS Operating voltage: 220/380 V Rated current: 4.7/2.7 A Connected load: 1.1 kW Dimensions & weight Dimensions (L x W x H): 700 x 650 x 1,900 mm Weight: 250 kg External reference: Lot 20 /Koch

Condition: excellent (used), HP30E with loader. Dodpfx Aaoym T Nqeajup

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Djdpfx Aaswmm H Rsajup Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 52AMXTE5308, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04, 0.08, 0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Dusdswmn A Tepfx Aaaop Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 3 axis DRO system Infinitely variable spindle speeds longitudinal power feed Cross power feed Table guarding One shot centralised lubrication system Lighting Base splash tray Coolant system NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Dujdpfx Ajx Sq Sbsaaep Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours

Condition: used, machine/vehicle number: 007968, Max. panel width: 300 mm Dujdpswu Abaofx Aaaop Max. panel length: 2500 mm No of Bottom Units: 6 Lateral horizontal groups: yes