Used Ema 201 for sale (4,658)

Condition: used, maximum load weight: 508 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,530 mm, loading space width: 1,280 mm, total width: 1,980 mm, total height: 700 mm, A34 GW26RGA00109, Lowering trailer, Manufacturer: STEMA, Model: WOM STS XT O1 7.5-25-13.1, Gross weight: 750 kg, low loader, hydraulically lowerable, unbraked, approved for 100 km/h * Swing axle with new kinematics * Support wheel * Hydraulic hand pump * Extremely sturdy welded frame with integrated railing * Additional central lashing rail Dcodpfx Ajyn Ufvja Eod * Waterproof phenolic plywood floor * Modern Multipoint III lighting system with reversing and fog lights * Optimal road performance thanks to stable, hot-dip galvanized chassis with STEMA safety V-drawbar * 2 wheel chocks * 2 splash guards * Patented foldable number plate holder...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 462 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,300 mm, loading space width: 1,840 mm, total width: 2,450 mm, total height: 870 mm, A30 GW24H415233, * Multitransporter 3318, Manufacturer: TEMARED, Type: DMC, Gross weight: 750 kg, 330x184 cm, with overrun brake, 100 km/h (accessory), with foldable loading ramp (accessory), low loader, lowering function Universal transport trailer with tilting drawbar for transporting motorcycles, ATVs, and other small vehicles. The trailer is significantly wider than trailers of the Moto series and others. Subject to errors and prior sale. Dcjdpfsyn Uf Aex Aa Eod

Condition: used, maximum load weight: 2,590 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 01/2024, loading space length: 4,800 mm, loading space width: 2,060 mm, total width: 2,130 mm, total height: 870 mm, A21. GW26H346846 Internal / loading dimensions: 480 x 206 cm Payload: approx. 2590 kg Gross vehicle weight: up to 3500 kg Unladen weight: approx. 910 kg 3 braked axles Robust, fully galvanized chassis with V-drawbar Overrun brake and parking brake Steel frame and support rails made entirely of perforated plate, fully welded and hot-dip galvanized Dcjdpfexw Dy Hex Aa Eed Transport platform: support rails made of LOHR perforated plate + central aluminum tread plate + additional reinforcement from plywood underneath the loading area Corrosion protection: hot-dip galvanized construction Manual winch Hydraulic hand pump tilting device Single-sided hydraulic cylinder for lifting and lowering Perforated support rails for load securing Side-folding rear lights for easy loading of the trailer Jockey wheel... and much more. Vehicle not refurbished Errors and prior sale excepted

Condition: used, maximum load weight: 2,739 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 4,070 mm, loading space width: 2,030 mm, total width: 2,160 mm, total height: 745 mm, A24. GW26G000233, Dcjdpfxoyn Ud Ej Aa Esd * 100 km/h version with shock absorbers installed * Cleverly stowed, lightweight ALU loading ramps under the loading deck for convenient loading and unloading. * Simply pull them out of the guide shaft and securely hook them in place. * The side perforated railing with multiple additional lashing points ensures your load is held securely. Vehicle transport trailer by STEMA, type Carrier XL - SHA .2, reg. no.: L-AH 138, GVWR: 3,500 kg, with heavy-duty support legs, loading ramps behind the license plate, braked with overrun brake, 100 km/h Vehicle not prepared, errors and intermediate sale reserved.

Condition: used, maximum load weight: 1,297 kg, overall weight: 1,800 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,570 mm, loading space width: 1,530 mm, total width: 1,647 mm, total height: 1,168 mm, Year of construction: 2022, A38 GW26NG000335, rear tipper trailer by STEMA, model ROCKO SHRK 18-25-15.1, GVW 1,800 kg, high loader, mesh extension foldable on all sides, overrun braked, 100 km/h, hydraulic Flexipump – cordless screwdriver pump. Subject to errors and prior sale. Dcedpfx Aasyn Uczj Ejd

Condition: used, maximum load weight: 1,979 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,530 mm, total width: 1,660 mm, total height: 1,260 mm, A39 GW26GA00010, Dedpfx Aasyn Ucue Eecd Rear tipper by STEMA, model ROCKO II SHRK .2, Gross weight: 2,700 kg, year of manufacture: 2022, overrun braked, high loader, rear tipper with aluminium side panels, hydraulically tiltable, with rear pendulum tailgate. Errors and prior sale excepted.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,540 mm, total height: 1,000 mm, A25 GW26NG000031 Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Dsdpeyn Ucbjfx Aa Eocd Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,540 mm, total height: 1,000 mm, A26 GW26NGA00003 Passenger Car Transport Trailer, Manufacturer: STEMA, Model: FTAK 27-40-21.2 Gross Weight: 2,700 kg, inertia-braked, WAP901 hand winch, low-loader, hydraulically tiltable. Djdpjyn Ubqofx Aa Eecd Base frame: Extremely robust and torsion-resistant with crash-tested safety V-drawbar. Tiltable, sturdy frame design with safety locks. All frame components are hot-dip galvanized for corrosion resistance. Running rails: Extra-wide, perforated, non-slip zinc-plated running rails with large elongated holes for securely fastening tie-down straps. The extra-wide rail makes it easy to transport vehicles with different wheelbases. Integrated ramps allow for easy loading and unloading. Side walls: Signal red powder coating (corrosion-proof and scratch-resistant) for enhanced safety. Vehicle not refurbished ...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 895 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2022, loading space length: 1,975 mm, loading space width: 1,275 mm, total width: 1,550 mm, total height: 930 mm, A29 GW26G000232 Motorcycle trailer for 3 motorcycles, Manufacturer: STEMA, Model: SHM 13-25-18.1, * 100 km/h version with installed shock absorbers Dcodpfx Aoyn Ub Dja Eed * Integrated ramp rail in every standard version * Low loading platform and long ramp rail * Convenient loading and unloading * Smooth driving behavior and robust chassis * Stable wheel brackets for secure motorcycle support * Side rails (optional) * Numerous additional lashing points * Manufactured according to EC regulations * Side underrun protection bars on both sides 1,300 kg, high-loader, inertia braked, 100 km/h, high-loader, for 3 vehicles, with 2 loading ramps behind the license plate, converted to 13" tires Loading height: 580 mm Errors and prior sale excepted.

Condition: ready for operation (used), load capacity: 10,000 kg, empty load weight: 3,500 kg, Demag DH-takel: EZDH 325 H12 K-V2-4/1 F10 Kind of: overhead travelling crane Span: 11 360 mm Djdpfx Aasxq Hqnj Escd Tackle speed: 0,4 & 4 m/min Rotationspeed: 8 & 31 m/min Displacementspeed: 10 & 40 m/min Numbre of riggers: double rigger

Condition: ready for operation (used), load capacity: 6,300 kg, Demag 6,3 ton x 11 410 mm Kind of: overhead travelling crane Span: 11 410 mm Radiocontrol: no radio control Numbre of riggers: double rigger Dcjdpfxewu Inxj Aa Ejd

Condition: ready for operation (used), self aligning set of welding rotators one driven unit one non-driven unit max load capacity: 300 ton max rolling capacity: 450 ton speed range: 60 1200 mm/min min diameter of workpiece: 1000 mm max diameter of workpiece: 7800 mm spare wheels included Max weight on both supports: 450 ton Number of wheels: 24 wheels Dcodpjx Enhyjfx Aa Eod Dia x width wheels: dia 580 x 140 mm Coating material on wheels: steel

Condition: ready for operation (used), load capacity: 10,000 kg, empty load weight: 4,850 kg, Demag EKDH 625 H20 K-V2-4/1-F6 Dedpexq Hquefx Aa Eocd Kind of: overhead travelling crane Span: 14 300 mm Tackle speed: 0,6 > 4 m/min Rotationspeed: 5 > 20 m/min Displacementspeed: 6,3 > 40 m/min Numbre of riggers: single rigger

Condition: ready for operation (used), load capacity: 32,000 kg, empty load weight: 38,000 kg, lifting height: 12,200 mm, Demag DH-takel met digitale weegschaal breedte: 6008 mm hoogte van de hoofdligger: 1500 mm hoogte van de takel bovenop de balk: 1210 mm Kind of: overhead travelling crane Span: 25 meter Tackle speed: 6,3 / 12,6 m/min Dsdpfxjv Sfrwe Aa Escd Rotationspeed: 10 / 34 m/min Displacementspeed: 10 / 100 m/min Numbre of riggers: double girder

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW Dcodpex H S Tijfx Aa Eed - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm Djdpoxt It Ajfx Aa Ejcd - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7689 TECHNICAL SPECIFICATIONS Dcedpoyarazsfx Aa Ejd - Tool diameter: 16mm - Maximum drilling depth: 160mm - Maximum milling length: 160mm - Adjustment of drilling unit: forward/backward, up/down and sideways - Working table dimensions: 600x320mm - Material clamping system - Motor power: 2.2kW - Dimensions (L/W/H): 950x740x1330mm - Weight: 283kg ADVANTAGES – Made in Poland – Very good condition – Used drilling machine Net price: 6300 PLN Net price: 1500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table Dsdpfxsyaq Nhj Aa Eocd - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 2014, clamping force: 6,500 kN, Demag System 200/500 This Sumitomo Demag injection moulding machine Systec 650/1020-2300 from 2014 is being auctioned—including the conveying system and a hot stamping unit—in our industrial auction, "Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo," taking place in Babenhausen until 10.03. The auction is held on our RESTLOS online platform. Machine inspections can be scheduled by appointment for Monday, 09.03.2026 from 10:00 to 11:00 am. Further details about the machine: Complete large-scale injection moulding system, consisting of a Sumitomo (SHI) Demag injection moulding machine, Sepro top-entry linear robot, Stäubli clamping and coupling systems, hot stamping/foil transfer station, as well as comprehensive temperature control and conveying equipment. Technical data Injection moulding machine Manufacturer: Sumitomo (SHI) Demag Model: Systec 650/1020-2300 Year of manufacture: 2014 Machine number: 80930051 Control unit: NC5 Plus Clamping force: 6,500 kN (650 t) Tie-bar distance: 1,020 mm Injection unit: 2300 Screw diameter: 60 mm L/D ratio: 20 : 1 Voltage: 400 V / 50 Hz Operating hours: PLC: approx. 103,846 h Drives: approx. 50,889 h Heater: approx. 71,072 h Machine cycles: approx. 4,942,086 Linear Robot / Part Handling Dsdpsyn Acpefx Aa Ejcd Manufacturer: Sepro Robotique / Sumitomo Demag Model: S5X-35 Year of manufacture: 2014 Weight: approx. 711 kg Max. pressure: 7 bar Type: top-entry linear robot (X, Y, Z axes with rotary axes) Operation: Sepro teach pendant / Integration into NC5 control Further automation components - Stäubli QMC122 magnetic quick-clamping plates (2 units) - Stäubli multi-coupling systems for media connections - Stäubli industrial robots (TX/RX series, handling) - Hot stamping/foil transfer station with rotary table and Siemens SIMATIC HMI - Priamus FillControl process monitoring system - Gammaflux hot runner controller - Dr. Escherich ESUC 81 ionization/cleaning unit Temperature control & material handling - Multiple Wittmann Tempro plus D140 temperature control units (approx. 10–12 units) - Chilled water manifold plates with flow indicators - Koch Technik H565 material loader - Koch Technik SGM01 metal separator Conveying equipment - M.A.i conveyor belt for part discharge - VTW conveyor belt for sprue discharge Key components overview: - Sumitomo (SHI) Demag Systec 650/1020-2300 injection moulding machine - Sepro S5X-35 linear robot with control system - Stäubli quick-clamping and coupling systems - Hot stamping/foil transfer automation cell - Process monitoring system (Priamus) - Hot runner control (Gammaflux) - Wittmann temperature control units - Koch material handling equipment - Part and sprue conveyor belts Notes - Please make use of the inspection appointment - Without moulds, materials, and decorations unless explicitly mentioned - Dismantling and loading to be handled by the buyer - Sold as pictured; functionality untested - Does not include any other items that may be shown in images - Completeness not verified.

Condition: used, Year of construction: 2002, clamping force: 1,500 kN, This Demag Ergotech injection moulding machine 1500-440, built in 2002, equipped with a Krauss Maffei robot and a CO₂ marking laser, is being auctioned in our industrial auction “Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo” in Babenhausen until 10 March. The auction takes place on our RESTLOS online platform. Further details about the machine: Injection Moulding Machine Manufacturer: Demag Model: Ergotech 150/500-440 System Year of manufacture: 2002 Clamping force: 1,500 kN (150 t) Screw diameter: 35 mm Control system: Demag Ergocontrol NC4 Hydraulic pressure: 190 bar Oil capacity: approx. 126 l Connection: 3 × 400 V / 50 Hz Machine weight: approx. 7,500 kg Operating hours: approx. 191,722 h Machine cycles: approx. 26,432,927 Industrial robot Manufacturer: KraussMaffei / Yaskawa Motoman Model: HP20 Year of manufacture: 2011 Design: 6-axis articulated robot Control system: Motoman NX100 Dcodpsynz R Esfx Aa Eed Laser marking system Manufacturer: Robot Technology GmbH Type: CO₂ laser marking Year built: 2011 Laser output: up to 30 W Connection: 3 × 400 V / 230 V Power consumption: approx. 2 kVA Scope of delivery - Demag injection moulding machine Ergotech 150/500-440 - 6-axis robot KraussMaffei / Yaskawa HP20 with control system - Robot safety cell / clean room enclosure - CO₂ laser marking system - Conveying technology / discharge and cross conveyor belts - Linear positioning units - Pneumatic pressure amplifier / compressed air booster - Temperature control and media connections Notes - Please make use of the inspection date - Without tooling, materials, or decorations unless expressly stated - Dismantling and loading by the buyer - Sold as pictured, functionality not tested - Without any other items possibly shown - Completeness not verified.

Condition: used, Year of construction: 2005, Demag System 200/500 This DEMAG injection moulding machine System 200/500-440, built in 2005, is being auctioned in our industry auction "Injection Moulding Machines - DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is taking place on our RESTLOS online platform. Further details on the machine: Complete injection moulding system with robotic automation, consisting of Demag injection moulding machine, Yaskawa 6-axis robot, laser marking system, screen printing station, conveyor technology, and temperature control units. Technical data Injection Moulding Machine Manufacturer: Demag Ergotech Model: System 200/500-440 Year of manufacture: 2005 Clamping force: 2000 kN (200 t) Injection unit: 440 Control unit: Ergocontrol C-Dias Connection: 3 × 400 V / 50 Hz Machine weight: approx. 7.7 t Operating hours cannot be read (counter unit was not powered) Industrial Robot Manufacturer: Yaskawa Motoman Dedsynzx Njpfx Aa Eecd Model: MH6 Year of manufacture: 2010 Payload: 6 kg Control unit: DX100 Laser Marking System Manufacturer: Robot Technology GmbH Model: FLACS.MARK 30W Year of manufacture: 2018 Scope of supply - Demag injection moulding machine - Yaskawa Motoman MH6 robot with control - Robot safety cell - Laser marking system - Screen printing station - Conveyor / part handling technology - 2 temperature control units - Stäubli quick-change system QMC 121 - Kistler mould pressure measuring system - Industrial vacuum cleaner Notes - Please use the inspection date - Without tools, materials, and decoration unless expressly mentioned - Dismantling and loading by purchaser - As pictured, functionality untested - Without any other items possibly shown - Completeness unverified.

Condition: new, Year of construction: 2025, New machine Dcodpoynu A Uefx Aa Esd Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, TECHNICAL DATA MACHINE SPECIFICATION WORKING RANGE • Max chuck diameter. 260 mm • Max swing diameter. 260 mm • Max machining diameter. 220 mm • Max part length. 110 mm • Travel X axis. 570 mm • Working stroke Z axis. 250 mm • Travel Z axis. 200 mm CLOSED STANDARD AUTOMATION • Number of carrier frames for workpiece diameter 80 to 220 mm. 14 pieces • Number of carrier frames for workpiece diameter 30 to 160 mm. 18 pieces • Number of carrier frames for workpiece diameter 30 to 85 mm. 30 pieces • Max total load. 120 kg PICK UP SWITCH POINTS • Pressed. 1 mm • Over pressed. emergency stop. 5 mm • Pickup spring travel max. 30 mm CHAIN SYSTEM • Chain length. 182 inches • Chain pitch. 1 inch (25.4 mm) • Chain tension at 20 carrier frames. 400 N • Chain wheel. Z equals 30 • Gear ratio. i equals 100 • Motor revolution per belt revolution. 540 LOADING TIME • Loading time. 2 to 4 seconds MAIN SPINDLE • Spindle flange according to DIN 55026. Size 6 • Spindle bearing front diameter. 110 mm • Max spindle speed. 4500 rpm (5500 optional) MAIN DRIVE. AC ASYNCHRONOUS MOTOR. TYPE 1MB241H • Power at 100 percent duty cycle. 18 kW • Power at 40 percent duty cycle. 27 kW • Torque at 100 percent duty cycle. 202 Nm • Torque at 40 percent duty cycle. 303 Nm • Corner speed. 850 rpm FEED DRIVE • Rapid feed speed X axis. 60 m per minute • Rapid feed speed Z axis. 30 m per minute • Feed force X and Z. 5.5 kN • Ball screw diameter X and Z. 40 mm • Acceleration. 5 m per second squared TOOL CARRIER • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max tool length including holder. 190 mm • Max swing diameter. 740 mm TOOL CARRIER WITH DRIVEN TOOLS • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max speed. 6000 rpm • Corner speed. 3000 rpm • Max torque at 10 percent duty cycle. 45 Nm • Max torque at 40 percent duty cycle. 30 Nm • Max torque at 100 percent duty cycle. 15 Nm ELECTRICAL EQUIPMENT • Operating voltage. 400 to 480 V • Control voltage DC. 24 V • Control voltage AC. 230 V • Frequency. 50 or 60 Hz • Connected load. 42 kW • Supply fuse rating. 63 A • Electrical design standard. VDE 0113 DIMENSIONS AND WEIGHT • Length. 2680 mm • Length including chip conveyor. 3820 mm • Width. 2040 mm Dcodpfsx Elf Aox Aa Ejd • Height. 2400 mm • Machine weight. approx 6500 kg NOISE EMISSION • According to DIN 45635. • Measured sound pressure level. 78 dB(A) during continuous cutting on a cylindrical test part.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Dcjdpjyc H I Sjfx Aa Ejd Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, Demag Hoist P625 H12 - 5 Ton - Hoisting height: 8 m - Year of construction: 1973 – Speed: 8/0.8 m/min - Including wheel set Demag Hoist P212 H11 - 5 Ton - Hoisting height: 5 m - Year of construction: 1975 – Speed: 4 m/min Demag Hoist DH1040 H16 - 8 Ton - Hoisting height: 16 m - Year of construction: 1989 - Speed: 8/0.8 m/min Demag Hoist P625 H8 - 10 Ton - Hoisting height: 4 m - Year of construction: 1970 - Speed: 4 m/min - Including wheel set Total: 4 units Dedpjyrr Icofx Aa Eecd