Chain Hoist Crane

Demag P Hubwerk Hubwerk 12500KG 12,5to P632 H13 HUB 8m Kran 400V 50Hz

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale The MAE is available for inspection. Rcodpewittpefx Apdeh We accept no liability for any warranty claims. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: as good as new (ex-display), JAN REILING BV has an extensive warehouse with more than 15,000 different DEMAG craneparts, from a nut to a complete crane. In addition to new parts, we also supply used parts, hoists and cranes. Our used hoists, cranes, parts and drives are ready in our warehouse completely overhauled. JAN REILING BV immediately supplies what you are looking for. JAN REILING BV has built up an extensive supplier network within Europe. In addition to DEMAG, we can also supply you with parts from all other brands quickly and affordably. We supply various Demag parts new from stock, such as a: ropeguides Rope brakes hoistingmotors drivingmotor gearbox brake hoisting motor Rcedoh Upyhopfx Apdeh bottomblock loadhook runningwheels trolley pushbutton radiocontrol cabledrum types like : KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P1250 P1050 P1600 P2100 DH DMR DR DC PK DK contact us for the possibilities We supply both new and used

Condition: used, Year of construction: 2000, Gas-fired high-speed steam generator with feed water treatment and dosage module. Additional title: high-speed steam boiler Steam capacity: 120 kg/h Perm. working pressure: 10 bar Capacity: 96 Ltr Set pressure: 20 mbar Length: 1,6 m Width: 0,95 m Rsdpew Td Ecofx Apdsch Height: 2,2 m Base construction: mounted on platform Features: feed water treatment and dosage module

Condition: excellent (used), ATLAS COPCO GA 110+ FF Screw Air Compressor ATLAS COPCO GA 110+ FF industrial screw air compressor, designed for the continuous and efficient production of compressed air in industrial facilities with high and constant demand. The GA series from Atlas Copco uses lubricated rotary screw technology, especially suitable for industrial applications where a reliable supply of compressed air is required for long operating periods. This unit corresponds to the FF (Full Feature) version, a configuration that integrates compressed air treatment within the unit itself, providing a compact solution for air generation and conditioning. MAIN FEATURES -Manufacturer: ATLAS COPCO -Model: GA 110+ FF -Type: Rotary screw air compressor -Configuration: Full Feature (FF) -Nominal power associated with the model: 110 kW -Continuous compressed air production -Lubricated rotary screw technology -Integrated cooling system -Air dryer integrated in the FF configuration -Condensate separation -Air filtration and treatment system Redpfxswnxzis Apdech -Electronic control via display / integrated controller -Monitoring of operating parameters -Complete, soundproof enclosure -Compact, packaged design -Robust construction for continuous industrial operation -Direct connection to compressed air networks -Access via panels for maintenance OPERATION Atmospheric air is drawn into the compressor and directed to the screw element, where two rotors progressively compress the air until it reaches the established working pressure. Subsequently, the necessary stages of oil separation, cooling, and air conditioning are carried out. In this GA 110+ FF version, the integrated dryer reduces the humidity present in the compressed air before it is fed into the factory network, eliminating the need to install a separate dryer in many configurations. The system can supply a general compressed air network intended for: -Pneumatic actuators and cylinders -Automatic valves -Filling and packaging equipment -Process machinery -Pneumatic transport systems -Instrumentation -Air-powered cleaning equipment -Automatic production lines APPLICATIONS Especially suitable for food processing plants, beverage factories, canning factories, packaging facilities, and other industries with a significant demand for compressed air. The combination of ATLAS COPCO, screw technology, 110 kW power, and Full Feature configuration provides a centralized solution for the supply of compressed air in industrial facilities. Machine available for inspection. Additional technical information, working pressure, flow rate, operating hours, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, final pressure: 1,400 bar, pressure: 1,400 bar, Good working high pressure pump with 20mm plungers 1400 bar 35 ltr/min IL 375 Rsdpsv Suhzofx Apdjch TF375H

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Rjdotpct Njpfx Apdoch

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg Rsdpob A Ny Eefx Apdoch

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z Rsdpfx Asrvg N Depdech

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: Rcodpsq I Nxdsfx Apdsh 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Year of construction: 1989, condition: ready for operation (used), High pressure pump ABEL PC57.1S Article no.: RE-HU-2019-1102-P51e Machine: High pressure pump Type: ABEL PC57.1S Redpfx Apod Hiwijdoch Mach.-Nr.: 12042E9 Capacity: 18 m3/h Pressure: 100 bar Motor: 75 kW