Used Elumatec Tbm 126 for sale (102)

Condition: used, Year of construction: 1997, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine Gedpfotvhr Sox Afieuh -Manufacturer: elumatec, 1-SPINDLE COPY MILLING MACHINE Type AS 70/44 -Spindle speed: 12000 rpm -Stop depths: see photos -Workpiece clamping: pneumatic -Dimensions: Milling machine 580/500/H1510 mm roller blocks 1050/210/H900 mm -Weight: 149 kg with pallet

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 118009950, spindle speed (max.): 18,000 rpm, feed length X-axis: 2,450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 280 mm, No reserve price – guaranteed sale to the highest bidder! Condition: The machine has always been maintained but now has a software error. TECHNICAL DETAILS X-axis travel: 2,450 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rate: 30 / 15 / 15 m/min Spindle Spindle speed: 18,000 rpm Spindle power: 3 kW Working area Max. machining length: 2,400 mm Compressed air Compressed air connection: 7 bar MACHINE DETAILS Length: 3,100 mm Depth: 1,650 mm Height: 2,250 mm Gedpfx Afowu Ekqeiouh Weight: 1,227 kg Voltage: 400 V, 3~, 50 Hz Connected load: 8 kW

Year of construction: 1997, condition: used, Max. sawing length: 6,000 mm Gsdpfxewmdx Ro Afisuh Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Minimum quantity spray device

Condition: excellent (used), Milling and copying machine Elumatec type KF 78/60 Godpfsvi R Avex Afisuh shipping EU - 300 euro

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Godpfx Afewprmzjieuh Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Cutter diameter max. 280 mm Cutter bore 40 mm Manual feed Profile height max. 200 mm Milling area: Length 400 mm Depth 110 mm Gusdpfjwpchvsx Afioh Height up to 150 mm Power 2.5 kW at 400 V/50 Hz Spindle speed 2,800 rpm Compressed air connection 7 bar Air consumption 10 l per cycle, with minimal quantity lubrication 20 l Length 1,540 mm, Depth 905 mm, Height 1,200 mm, Weight 248 kg

Condition: used, Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display Gusdpfoinwuqex Afieh -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Gedpstuvg Dofx Afiouh

Year of construction: 2009, condition: good (used), 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,300 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. Speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm Guodpfx Afstvrc Seieh minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg

Condition: excellent (used), Shipping EU 300euro Gedpfx Afjl Sklgoijuh

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Gujdpfxewgmyqe Afieh Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Year of construction: 1993, condition: excellent (used), Maximale Positionierlänge: 2600-3000 mm Godpfx Aefibfnjfiouh Anschlag- und Mess-System mit E 255-Steuerung für die Schnittlängenpositionieru Zum Anbau an alle 1-Kopf-Sägen (Recht)

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg Guodjttnt Ispfx Afioh

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator Gujdpfxer Ikvue Afish - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Condition: excellent (used), Year of construction: 2016, operating hours: 1,395 h, functionality: fully functional, machine/vehicle number: 1400040877,  4-axis (X, Y, Z, A) center,  For economical and efficient machining of aluminum profiles and thin-walled steel profiles,  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and threading take place on a stationary profile, Godpfx Asuc U S Nofiouh  Smooth machining using all tools,  Simultaneous tool magazine ensures short tool change times and, as a result, optimal machining cycles,  Magazine can be equipped with eight tools,  Windows operating system  Machine equipped with eluCam program  Max. length of machining fields with front machining: 4200 mm  Max. length of machining fields without front machining: 4320 mm  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots),

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 6280028128, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw material system Length of the raw bar system: 7,600 mm Finished part system Finished part length: 3,500–4,600 mm Kurt cell Kurt cell (50-150/150-350): optional Feed system Shortest raw bar length: 1,500 mm Swing arm selection: 5 (option 9) Support plate: 10 (over 120 mm 5) Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guide: standard Remnant piece measurement: optional Remnant piece processing: fully automatic Processing station Number of axes: 5 Milling spindles: 8 (can be prepared) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Saw angle: 22.5°–157.5° (swivel) Notch cuts: standard (from above) Outfeed chip carriage Number of axes: 1 Outfeed conveyor Lifting station: yes Swing selection: 5 Width of outfeed conveyor: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connection power: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feed magazine Guodpfevvu S Iex Afish - Loading transport - Processing station with milling unit, saw unit and clamping blocks - Unloading transport of profiles (removal gripper) and unloading conveyor - Acoustic protection cabin - Control panel on the soundproof cabin - Control cabinet - Fencing and protective doors

Condition: excellent (used), Year of construction: 2015, AUTOMATIC TWO-HEAD SAW ELUMATEC DG 244 + E580 -5 YEAR 2015 Guodpfx Ajwltqaofioh

Year of construction: 2003, condition: good (used), Roller conveyor Elumatec 3000mm Guedpfxstpcrgj Afijh

Year of construction: 2025, condition: new, machine/vehicle number: 073108206Z, We offer new hydropneumatical unit for machines elumatec DG 79, MGS 73 and SA 73. Never used. Original elumatec spare part. number: 073108206Z We can send it to your address. Guedpfx Aowhdy Rjfieh

Condition: excellent (used), Year of construction: 2020, functionality: not functional, machine/vehicle number: 222100410, milling height: 150 mm, spindle diameter: 280 mm, milling length: 400 mm, milling spindle speed (max.): 2,800 rpm, No reserve price - guaranteed sale at the highest bid! For milling transom and door profiles made of aluminum and PVC Gujdpfewaa Sysx Afieh TECHNICAL DETAILS Milling height: max. 150 mm Milling depth: max. 110 mm Milling length: max. 400 mm Profile height: max. 200 mm Milling cutter diameter: max. 280 mm Material stop swivel range: up to 60° to the right and left Drive Milling motor: 2.5 kW Speed: 2,800 rpm MACHINE DETAILS Maintenance has been performed by the manufacturer

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 6300001143, elumatec sawing center type SBZ 630/01 - maximum profile length 7.500mm - feed magazine for 7 profiles with 200mm width - 90° cuts over Y/Z axis - 45°-90°-135° tilting over Y/A axis - 45°-90°-135° tilting over Z/C axis - controlled material clamping - saw motor power 7.5 kW Gsdpfetpcg Nsx Afieuh - controlled saw feed - including automatic chip removal belt Machine can be viewed working and will be available July 12

Condition: like new (used), Year of construction: 2003, functionality: fully functional, cutting length (max.): 6,000 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 500 mm, saw blade diameter: 550 mm, pivoting range: 45 °, Brand new machine - never used! TECHNICAL DETAILS Maximum cutting length: 6,000 mm Minimum cutting length at 90°: 375 mm Minimum cutting length at 45° (inclined): 375 mm Saw blade diameter: 550 mm Saw blade speed: 2,250 rpm Inward tilt range (pneumatic): 90° - 45° Manual tilt range: up to 22.5° inward and up to 140° outward (with digital display) Inward tilt range (pneumatic): 90° - 45° Feed and connections X-axis feed length: 5,000 mm Y-axis feed length: 500 mm Input voltage: 400 V Compressed air connection: 7 bar Motor power per unit: 4 kW MACHINES DETAILS Total width: 1,350 mm Guedpjv Rf Uvofx Afish Total height: 1,550 mm Total weight: 1,850 kg EQUIPMENT - 2 additional heads included (4 heads included in total) - Bottom cutting possible for precise cuts - Pivoting and tilting saw units; intermediate angle manually adjustable - Includes cutting/excess length module, protective covers, and pulsed coolant system

Year of construction: 2014, condition: excellent (used), Window sashes fitting center for mounting fittings on plastic sashes Ergonomic screwing of fittings in the shortest possible time Gedpfx Afem H Uf Isisuh Hardware assembly table – for measuring and cutting hardware components Optimization of window sashes processing by combining various work processes at one station Assembly table, pneumatically tiltable Device for window sashes, measuring and centering, pneumatically moved Guillotine for cutting fittings with stops ensuring a constant middle position of the handle Two stop blocks for different leaf widths Mobile screwdriving unit with pneumatic height adjustment. Screw feeder Working surface: plastic sliding strips

Year of construction: 1989, condition: excellent (used), Sägeblattdurchmesser: 350 Guedpsff Snbofx Afieh

Condition: excellent (used), Year of construction: 1999, Table saw Elumatec TS 161 Saw blade diameter 280 mm Saw blade speed 3,200 1/min. Guodpfxjui Iuwe Afieh Electrical connection 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg