Used Elumatec St 225 for sale (146)

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: ELUMATEC SBZ 610 cutting center, manufactured in 2020. The machine is in perfect working order and ready for operation. Iisdpfezpwzbex Ahyeh

Condition: excellent (used), Year of construction: 2011, The machine in a very good condition. 7,6 meters long, 2 working places. Possible to give a warranty up to 6 month. Iisdpoyia Ezjfx Ahyoh

Year of construction: 2005, condition: used, functionality: fully functional, machine/vehicle number: 1223030045, elumatec SBZ 122/30 profile machining centre, 3-axis controlled, machining length 3,850 mm - 2 tool magazines - 2 mitre heads - profile length measurement - 4 pneumatic clamps - automatic clamping adjustment - manual control panel - E550 control unit - spindle with 6 kW power Iijdpfx Aozgv Hwehyoh - light curtain safety system Video of the machine in operation available upon request.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Iisdpey Ah Tkofx Ahyoh Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Year of construction: 2008, condition: good (used), machine/vehicle number: 0733337043, Offer 26310 Technical data: Iijdpfsz Iyz Eex Ahyeh - Saw blade diameter 380 mm - Miter adjustment 45° - 90° - 45° - Automatic saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 3 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1500 x D 900 mm - Weight approx. 300 kg - Outfeed roller conveyor with stop, adjustable via handwheel + digital display 3000 mm - Infeed roller conveyor 6000 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Excellent technical condition of machine. Iiodpezzxpkjfx Ahyjh

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Iijdpozrhvujfx Ahyeh

Condition: used, Year of construction: 2013, We are offering for sale a two-head Elumatec ZS 720/00 LV welding machine, manufactured in 2005, designed for welding PVC profiles for the production of windows, doors, and frames. The two-head configuration allows for the simultaneous welding of two corners of the frame, ensuring precise processing and good productivity. The machine is characterized by its robust Elumatec construction and is suitable for professional use in companies that manufacture PVC window and door frames. Technical specifications: Manufacturer: Elumatec Model: ZS 720/00 LV Year of manufacture: 2005 Type: two-head welding machine Iedpezmhuaofx Ahyoih Application: welding of PVC profiles Electrical supply: 3/N/PE – 380/400 V Frequency: 50/60 Hz Installed power: 5.2 kW Operating pressure: 7 bar CE marking Made in Germany The machine is used and is available at our location in Termini Imerese, Palermo. It can be viewed by appointment. Additional photographs, technical information, and videos can be provided upon request.

Condition: excellent (used), Year of construction: 2022, operating hours: 52 h, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, Do ekonomicznej i wydajnej obróbki profili z aluminium, tworzywa sztucznego i cienkościennych profili stalowych Wszystkie procesy obróbcze jak frezowanie, wiercenie i gwintowanie odbywają się na nieruchomym profilu, dzięki czemu powierzchnia profilu jest chroniona Lepsze wyniki pracy dzięki zastosowaniu inteligentnej techniki sterowania Szybkie pozycjonowanie zespołu obróbczego z prędkością sięgającą 60 m/min dzięki zastosowaniu dynamicznych serwonapędów Gwintowanie bez uchwytu kompensacyjnego Automatyczne rozpoznawanie zacisków i pozycjonowanie Automatyczny magazyn narzędzi z czterema półkami na narzędzia (bez narzędzi) Nowoczesne, 3-osiowe sterowanie Ergonomiczna praca dzięki zastosowaniu nowoczesnego łoża pochyłego Brak konieczności wykonywania ruchu referencyjnego osi dzięki zastosowaniu systemów opartych na enkoderach absolutnych Unikanie kolizji dzięki automatycznemu rozpoznawaniu zacisków i pozycjonowaniu Silnik frezarki Power-Torque z zamkniętym układem regulacji obrotów zapewnia krótki czas rozruchu i wyhamowania wrzeciona Certyfikowana, zintegrowane z napędem funkcje bezpieczeństwa Niskie zużycie prądu dzięki zastosowaniu inteligentnej techniki sterowania Większa efektywność energetyczna dzięki połączeniu napędów osi pomiędzy obwodami Awaryjne zasilanie elektryczne (UPS) System operacyjny Windows Panel PC 15,6", procesor i3, przyłącza USB oraz złącze sieciowe Łatwe i wygodne wprowadzanie programów za pomocą eluCam na panelu operatora również w czasie obróbki Zdalna konserwacja online Wyposażenie maszyny Ijdpewgmyqofx Ahysih Chłodzone powietrzem wrzeciono frezu 8 kW, S1 Kabina do ochrony operatora Cztery poziome dociski pneumatyczne do mocowania materiału Ogranicznik materiału, po lewej stronie Uchwyt narzędzi HSK-F63 Smarowanie ilością minimalną Wysokowydajny płyn chłodzący Ręczny pulpit sterowniczy Szablon głębokości Opcje Narzędzia Uchwyty narzędzi Automatyczny magazyn narzędzi do maks. czterech narzędzi standardowych Automatyczny magazyn narzędzi do głowicy kątowej Obrotowa głowica kątowa HSK-F63 na dwa narzędzia Urządzenie chłodzące Green-line do szafy sterowniczej z obniżonym zużyciem energii Czytnik kodów kreskowych Kabina ochronna, opcjonalnie z zamknięciem dookoła Standardowo cztery zaciski. Możliwe jest rozszerzenie do ośmiu zacisków Prawy referencyjny ogranicznik materiału do przykładania elementów z obróbką nadmiarowych długości Dodatkowy ogranicznik do obróbki nadmiarowych długości po lewej stronie Obustronny pomiar długości Zacisk podwójny oraz dodatkowe akcesoria po złożeniu zapytania Panel PC 18,5", procesor i5 Panel PC 21,6", procesor i7 Uchwyt na notatki Osłona dźwiękochłonna Utylizacja wiórów z wykorzystaniem wanien na wióry

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner Iiedpfx Ajx E Rd Dehyoh After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Isdpjzzw Edsfx Ahysih Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: 8340020123, For sale: ELUMATEC EV 834 cleaning machine. The machine is in working condition. Iiedpfx Ahjy Dfgkjyoh

Year of construction: 2010, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control Windows XP with Elusoft Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle Right-angle gearbox with saw blade diameter up to 254 mm (only 90° cuts possible) Tensioner detection and automatic displacement 8 pneumatic material clamps Oscillating operation possible Isdpfx Ahszx D Ruoyoih Photoelectric sensors

Year of construction: 2001, condition: used, Max. drum length: 7,500 mm Isdpjzzmixefx Ahysih Max. saw blade diameter: 550 mm Control E 550 Swiveling inside and outside motorized up to 140 degrees at both units (3-axis machine) Pneumatic tilting of the angle between 45 and 90 degrees with digital angle display Minimum quantity spray device Machine is loaded free

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Iiedpfxjwwtw Ds Ahyjh Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Year of construction: 2013, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Iiedpfxezx U S No Ahyeh Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Condition: used, Year of construction: 1993, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Iijdpfez Hx Ibex Ahyeh Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Year of construction: 2007, condition: ready for operation (used), Iiodpoyt E D Tsfx Ahyjh

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Iisdpow A Rv Iefx Ahyoh Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 3 angle heads Profile length measurement at the head Tensioner detection and automatic displacement 8 pneumatic material clamps Oscillating operation possible Iedpfxezx D Sfs Ahyeih Photoelectric sensors

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. Travel distance X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows 10 control with new computer in 2023 Iedpfx Ahjwwukxsyjih Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light curtain areas, enabling pendulum operation A total of 8 material clamps Spindle in very good condition, spindle-in-draw force: 12.5 kN Protective fence removed, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Iijdpfjzxc Swox Ahyoh Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Iiodpfx Ahszz Aqlsyjh Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation, we can ship the machine to your address.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1500050182, Elumatec SBZ 150 5-axis profile machining center for aluminum profiles up to 7.3m and thin-walled steel profiles. Due to a production changeover to a tube laser system, we are selling our fully functional Elumatec SBZ 150. Service was performed by Elumatec in March 2026, and we have not used the machine since then. Interested parties are welcome to visit us at any time. We would be happy to demonstrate and allow you to test the machine. Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - A-axis swivel angle: 0-90°, freely programmable - C-axis swivel angle: 0-355°, freely programmable - Max. machining length without end-face machining: 7300mm - Max. machining length with end-face machining: 6980mm - Tool changer with 10 positions, as well as a saw blade holder - 8 material clamps - Tool holder HSK63 - Spindle power 15kW / 22000 RPM - 2-layer machining - Minimum quantity lubrication - Central lubrication - Saw blade 400mm Machine is available immediately! Space requirements can be found in the layout in the appendix. The transport instructions can also be found in the appendix; if you have any questions, please do not hesitate to contact us. Iedoy Dvq Hspfx Ahyjih Due to the planned re-installation, dismantling, loading, and transport should preferably be organized by the buyer. Various auxiliary tools can be provided upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy, or similar. Subject to prior sale.

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Machine no.: 20 192 Voltage: 230/400 V Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Iisdpfxjy D I R Se Ahyoh Operating pressure max.: 8 bar If you have any questions or need more information, please feel free to send us a message or call us.