4-axis bar machining center
elumatec SBZ 140

Name: elumatec SBZ 140
Brand: elumatec
Price: 78000 EUR
Availability: InStock

EXW Fixed price plus VAT

€78,000

Year of construction

2014

Condition

Used (fully functional)

Location

Bretten

4-axis bar machining center elumatec SBZ 140

Machine data

Machine type:: 4-axis bar machining center

Manufacturer:: elumatec

Model:: SBZ 140

Machine number:: 1400040685

Year of construction:: 2014

Condition:: excellent (used)

Functionality:: fully functional

Price & Location

EXW Fixed price plus VAT

€78,000

Location:: Gewerbestraße 22, 75015 Bretten, Deutschland

Call

Details about the offer

Listing ID:: A21699528

Update:: 12.04.2026

Description

Special Features:
Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS
Water-cooled spindle, 9.5 kW S1
3-layer machining possible
Carefully cleaned and overhauled – excellent condition

Description:
Graphical operator guidance and graphical service support
A-axis for stepless machining from above – swivel angle 180°
HSC milling spindle for speeds up to 24,000 rpm
Large machining width
Standard with clamping detection and automatic clamp positioning
8 tool stations
Complete profile machining with stationary profile bar
Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis
Robust, low-wear direct drive
Protective hood
Digital axis controllers for all 4 axes with high-resolution measuring system
4-axis industrial PC control
2 1/2 D interpolation
15" TFT color screen
Network connection RJ45 10/100 MBit
Hard disk
Full PC keyboard
Remote maintenance via TCP/IP (requirement: internet access)

Technical Specifications:

Max. machining length without frontal machining: 7,600 mm
Max. machining length with frontal machining: 7,500 mm (tool-dependent)
Travel X-axis: 7,700 mm
Travel speed X-axis: 65 m/min
Travel Y-axis: 850 mm
Travel speed Y-axis: 60 m/min
Travel Z-axis: 650 mm
Travel speed Z-axis: 60 m/min
Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180°
Positioning accuracy:
X-axis: +/- 0.1 mm / 1 m
Y-axis: +/- 0.1 mm
Z-axis: +/- 0.1 mm
A-axis: +/- 0.1°
Max. spindle speed: 24,000 rpm
Max. spindle power: 9.5 kW S1
Tool holder: HSK F 63
Max. cutter diameter: 80 mm
Max. milling cutter diameter: 200 mm
Compressed air connection: > 7 bar
Voltage: 400 V, 3 PH, 50 Hz
Fuse: 35 A
8 tool stations

Included Accessories:
Tool setting gauge
8 pneumatic material clamps
Automatic clamp detection
Dosing spray device
Protective hood
Front light barrier
Side safety fences (left and right)
Central chip extraction
2 pneumatic material stops
3-circuit clamping system

Gjdpfx Afey Ah Tko Soiw
Length measurement for profile bar
Barcode scanner with wireless transmission
Special version with light barrier

Additional options available on request:
Programming software (office) eluCad, incl. hotline contract for 6 months
3D import license for one machine of category "L"
Data import license package for one machine of category "L"
CSV import license for one machine of category "L"
Macro hashing license for one machine of category "L"

Other information:
The machine is delivered ready for transport, including transport locks, loaded onto truck

Additionally, we optionally offer the following services on request:
Installation and commissioning
Machine training
4/5-axis training package for machine and eluCad

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2005

6 listings online

Call

Send inquiry

Telephone & Fax

+49 7043 ... show

These listings may also fit your interest.

Listing

Gütersloh

18,438 km

2012 Elumatec SBZ 140
ElumatecSBZ 140

€52,500

Fixed price plus VAT

Call

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Giodpfszf I Uwjx Af Ssw Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price

See details

Listing

Fully Automatic Optimiser Saw 6m ProfiFeed Technologies A550 Fully Automatic Mitre Aluminium Saw

Kruševac

17,847 km

Fully Automatic Optimiser Saw 6m
ProfiFeed TechnologiesA550 Fully Automatic Mitre Aluminium Saw

Call

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. Gedpfx Ajf Ekn Def Ssiw • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

See details

Auction

Groningen

18,428 km

4-axis CNC machine
ElumatecSBZ 140

€16,900

To the auction

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. Gjdpfx Aozhuyfjf Seiw 8x tool holders with collet chucks

See details

Listing

Wijchen

18,566 km

Profile machining center, milling machine for window profiles
ElumatecSBZ 140

€34,500

Fixed price plus VAT

Call

Year of construction: 2009, condition: excellent (used), Elumatec SBZ 140, extended version: 7.6 meters Giodpfxezhg S Ts Af Sew Weight approximately 5000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety guard Light curtains Automatic clamping detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer. Max. milling diameter: 80 mm Max. sawing diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, -90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (in many configurations) Control: 4-axis CNC system, with PC control, color screen, USB & network. Software: eluCam. Automatic material clamping, automatic positioning via indexing pins Pendulum/shuttle operation (two work zones), which improves production cycle time. In addition to milling and drilling, it can also tap, saw, and perform profile machining – all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT is reclaimable for businesses).

See details

Listing

Dugo Selo

18,231 km

Rod machining centre
ElumatecSBZ 151

€94,000

Fixed price plus VAT

Call

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Giodpowwtw Dofx Af Ssw Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

See details

Listing

Poland

18,654 km

Elumatec SBZ-140
ElumatecSBZ-140

Call

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of axes: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. It features a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, making it suitable for machining aluminum and thin-walled steel profiles. The machine includes an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining centre we have for sale. Contact us for further details. • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining range: 0°–180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travels: • A-axis rotation: 0°–180° • A-axis programming increment: 0.1° • Axis speeds: Godpszaq Eiefx Af Sjiw • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: Air-cooled • Tool magazine: 8 positions, co-moving for fast tool changes, expandable system • Machine features: Stationary profile machining, fast automatic tool changes, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15” color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum mode / 2 working zones (optional configuration)

See details

Listing

Germany

18,384 km

4-Axis Profile Machining Center
ElumatecSBZ 140

Call

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Giodpfezbb Rrjx Af Sow

See details

Listing

BAR PEELING MACHINE & BAR STRAIGHTENING IPROLAM Type 20 - 80 mm

Sofia

17,681 km

BAR PEELING MACHINE & BAR STRAIGHTENING
IPROLAMType 20 - 80 mm

Call

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Gsdswqb Scopfx Af Ssiw Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

See details

Listing

Gütersloh

18,438 km

2003 Elumatec SBZ 140
ElumatecSBZ 140

€44,000

Fixed price plus VAT

Call

Year of construction: 2003, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. Processing length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 RPM Windows operating system minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed fume extraction Pendulum operation through two light barrier areas Godjuwq S Dopfx Af Sjiw Loading is included in the price Weight: approx. 4,500 kg Very good condition

See details

Listing

Germany

18,384 km

Profile Machining Center
ElumatecSBZ 140

Call

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Gijdpfx Aoy Aafxof Sow

See details

Listing

Welding machine (window production) Emmegi Integra

Scerne

18,439 km

Welding machine (window production)
EmmegiIntegra

Call

Condition: excellent (used), functionality: fully functional, Welding machine: FUSION 4H Frame discharge unit First milling module Q-MATIC 1 Gsdpfoxzzxbjx Af Sjiw Serial connection between welding machine and cleaning unit Rotary table Cleaning unit (second model) TRIMMER 4A Extraction table Second milling module (INTEGRA Q2) Q-MATIC 2 Line supervisor laptop

See details

Listing

CNC turning and milling center Elumatec SBZ 140

Lithuania

17,416 km

CNC turning and milling center
ElumatecSBZ 140

€50,000

ONO plus VAT

Call

Auction

Päijät-Häme

16,984 km

Rod machining center
ElumatecSBZ 140

Details

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Speed: 21,000 rpm MACHINE DETAILS Giodpfx Aoxy Hcisf Sjw Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

See details

Listing

Complete production line Stürtz SE-VSM-B and SE-2AS-CNC

Tartu

17,077 km

Complete production line
StürtzSE-VSM-B and SE-2AS-CNC

€15,000

EXW ONO plus VAT

Call

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 7232, Welding and cleaning center STUERTZ SE-VSM-B and SE-2AS-CNC Gijdpfx Afsw Edz Ae Sew Used, year of construction 2000 Database with Gealan, Rehau and Aluplast profiles. There is a function for welding HFL windows. Documentation, additional photo and video available. We can carry out installation and commissioning.

See details

Listing

Dugo Selo

18,231 km

Profile machining centre
ElumatecSBZ 140

€79,000

Fixed price plus VAT

Call

Year of construction: 2016, operating hours: 10,900 h, condition: excellent (used), functionality: fully functional, The machine is in very good condition and fully operational. We don't need it anymore so it is for sale. It is regularly maintained. Dismantling and load on truck are included in price. Some other informations: 4-axis profile machining centre Gisdowwtylspfx Af Sew Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 7.600 mm 8 pneumatic clamps Tool magazine with 8 tools capacity Spindle working hours 5100h Additional tehnical specifications available on request

See details

Advertise here