Used Elumatec As 70 for sale (139)

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Itsdpfx Aszcz Dnom Hjl Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Iedpfx Amezdi Nmo Hstl

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, Feature | Value Machine type | Double miter saw Saw blade diameter | 380 mm Saw blade speed | 2,800 rpm Motor power | 2 × 0.74 kW (per sawing unit) Operating voltage | 400 V / 3~ / 50 Hz Operating pressure | 7 bar Swivel range | 0° to 45° to the left and right Detent positions | 15°, 30°, 45° Iodpfx Amezdvnis Hstl Max. cutting length | approx. 7,000 mm (model-dependent) Material | Aluminum and plastic profiles

Year of construction: 2005, condition: excellent (used), functionality: fully functional, - Maximum cutter diameter: 280 mm - Cutter bore: 40 mm - Manual feed - Maximum profile height: 200 mm Milling area: - Length: 400 mm - Depth: 110 mm - Height: up to 150 mm Itodpfx Amoyyma Rs Hsl - Power: 2.5 kW at 400 V/50 Hz - Milling spindle speed: 2,800 rpm - Compressed air connection: 7 bar - Air consumption: 10 l per work cycle, 20 l with minimum quantity lubrication - Dimensions (L x W x H): 1,540 mm x 905 mm x 1,200 mm, weight: 248 kg

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg Itjdpfxjzf Agzj Am Hol

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1423530534, Offer 26120 Technical specifications: - Saw blade diameter approx. 500 mm - Saw blade speed: 2800 rpm - Cutting area e.g. up to approx. 180 x 150 mm Itedpey Efl Njfx Am Hol 150 x 200 mm - Feed length for 90° cuts: 5 - 600 mm - Mitre cuts possible up to 45° - Compressed air connection: 7 bar - Air consumption per work cycle without / with spraying: 50 / 64 l - Drive: 400 V / 4.0 kW - Space requirement approx.: W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - Incl.: - Digital display - Pneumatic vice - Automatic shut-off at profile end

Year of construction: 2007, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 9,000 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Itjdpfx Amjxwydbj Hol Max. speed 24,000 rpm. Spindle power: 21 kW Tool changer with 13 standard and 7 special tools minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Loading is included in the price Weight: approx. 8,500 kg

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Maximum machining length: 3,100 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Itodpfx Ajxvp Nkem Hol Loading is included in the price

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with a new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible Itodpfxewwukxo Am Hol A total of 8 material clamps Spindle in very good condition, spindle pull-in force: 12.5 kN Safety fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm Itodpfozf I Ttox Am Hol handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Isdpfexvaw Sjx Am Hetl

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Itsdpfx Amszgfvbj Hjl Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. Itjdeyv H Tiopfx Am Hsl • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute Iodpfozwl R Tox Am Hotl 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Weight: about 350 kg

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, total height: 2,000 mm, total width: 1,600 mm, overall weight: 5,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, product length (max.): 7,500 mm, number of axes: 3, This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details. • Control: Industrial PC with eluCam software; 15" colour monitor • Turret/tooling: 8-position rotating turret head with 8-position tool changer • Rapid traverse: X 60 m/min; Y 30 m/min; Z 30 m/min Itsdpeyt Ifyjfx Am Hol • Tool interface: BT30 • Collet systems: ER25 / ER32 • Saw blade diameter: approx. 300–420 mm Technical Specification Taper Size BT 30

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks Itsdpfx Amjzhuyfj Hel

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 For attachment to any Elumatec single-head saw (right) Itjdjzh Itfspfx Am Hol Max. push length: 3000 mm

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0799132963, Solid cast construction with integrated rotary table guarantees optimal profile support for precise angle cutting. Saw heads can be continuously swiveled from 0° to 45° to the left and right. Itodoxxzdlspfx Am Hsl

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 1780020742, functionality: fully functional, The machine was used very little. Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Ijdpfx Ajzmn N Rsm Hotl Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Itodpsuiy Ngofx Am Hjl Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: excellent (used), functionality: fully functional, ELUMATEC SBZ150 5-axis CNC profile machining center, manufactured in 2004. Itodpfx Asylbvijm Hel 5-axis CNC machining center for aluminum and thin-walled steel profiles.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Technical data – Elumatec TS 161 Machine type: Table saw Saw blade diameter: 280 mm Saw blade speed: 3,200 rpm Motor power: 1.1 kW Operating voltage: 400 V / 3~ / 50 Hz Swivel range: 0° to 45° to the left Cutting speed: 3,200 m/min Dimensions (L × W × H): approx. 650 × 750 × 1,300 mm Ijdpfx Amszf Rlle Hjtl Weight: approx. 96 kg

Condition: used, Pneumatic Glazing Bead Saw / Mitre Saw – Elumatec GLS 192/06 – Year 2005 with electronic positioning system for cut length management. Equipped with a protected cutting unit featuring integrated safety systems, electronic control, and a robust structure designed for intensive industrial use. The machine ensures precise machining operations with high productivity and excellent cutting quality. Main Features: Brand: Elumatec Model: GLS 192/06 Application: cutting PVC and aluminum profiles Heavy-duty industrial frame with high rigidity Cutting area protection system Ergonomic and user-friendly controls Suitable for window and door manufacturing Used machine in good working condition Technical Specifications: Blade diameter: 200 mm, 98 mm (45° mitre cut) Blade speed: 2,800 rpm Cutting unit feed: pneumatic Output power: 900 W Power supply: 3/PEN 400 V Frequency: 50 Hz Current: 4.8 A Installed power: 1.8 kW Speed: 2800 rpm Operating pressure: 7 bar Dimensions: approx. 5100 x 1050 x 1180 mm Weight: 140 kg Ideal for: Window and door production PVC/aluminum frame workshops Itodpjy Uw Eaefx Am Hjl Precision industrial machining operations

Year of construction: 2003, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. Processing length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 RPM Windows operating system minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed fume extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg Iodpfx Asuwq S Dsm Hotl Very good condition

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor Iodszughbjpfx Am Hotl - 2x saw blade 120 x 4.0 x 30 Z96