Used Elumatec Af 223 for sale (141)

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A Fgodpfoy Ah Tkex Al Ash 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, cutting length (max.): 6,000 mm, Elumatic double miter saw incl. accessories, short-length cutting device, infeed roller conveyor, ECI-580 control system. Fgsdpfx Alszfagls Aoh

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: ELUMATEC SBZ 610 cutting center, manufactured in 2020. The machine is in perfect working order and ready for operation. Fjdjzpwzbopfx Al Aegh

Condition: used, These are three machines: 1. Aluminum saw machine TS161 – in very good condition. Max. saw blade diameter 280 mm Angle adjustment: manual Fsdpfx Aez Hn Anol Aegh Pneumatic material clamps 2. Aluminum saw machine TS161, requires repair; pneumatic cylinders are missing (motor runs) 3. Copy milling machine Elumatec AS 70AS70/44, requires repair (motor runs) Price for 3 machines: €2,500.00

Condition: excellent (used), Year of construction: 2022, operating hours: 52 h, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, Do ekonomicznej i wydajnej obróbki profili z aluminium, tworzywa sztucznego i cienkościennych profili stalowych Wszystkie procesy obróbcze jak frezowanie, wiercenie i gwintowanie odbywają się na nieruchomym profilu, dzięki czemu powierzchnia profilu jest chroniona Lepsze wyniki pracy dzięki zastosowaniu inteligentnej techniki sterowania Szybkie pozycjonowanie zespołu obróbczego z prędkością sięgającą 60 m/min dzięki zastosowaniu dynamicznych serwonapędów Fgedpfowgmyqsx Al Aoh Gwintowanie bez uchwytu kompensacyjnego Automatyczne rozpoznawanie zacisków i pozycjonowanie Automatyczny magazyn narzędzi z czterema półkami na narzędzia (bez narzędzi) Nowoczesne, 3-osiowe sterowanie Ergonomiczna praca dzięki zastosowaniu nowoczesnego łoża pochyłego Brak konieczności wykonywania ruchu referencyjnego osi dzięki zastosowaniu systemów opartych na enkoderach absolutnych Unikanie kolizji dzięki automatycznemu rozpoznawaniu zacisków i pozycjonowaniu Silnik frezarki Power-Torque z zamkniętym układem regulacji obrotów zapewnia krótki czas rozruchu i wyhamowania wrzeciona Certyfikowana, zintegrowane z napędem funkcje bezpieczeństwa Niskie zużycie prądu dzięki zastosowaniu inteligentnej techniki sterowania Większa efektywność energetyczna dzięki połączeniu napędów osi pomiędzy obwodami Awaryjne zasilanie elektryczne (UPS) System operacyjny Windows Panel PC 15,6", procesor i3, przyłącza USB oraz złącze sieciowe Łatwe i wygodne wprowadzanie programów za pomocą eluCam na panelu operatora również w czasie obróbki Zdalna konserwacja online Wyposażenie maszyny Chłodzone powietrzem wrzeciono frezu 8 kW, S1 Kabina do ochrony operatora Cztery poziome dociski pneumatyczne do mocowania materiału Ogranicznik materiału, po lewej stronie Uchwyt narzędzi HSK-F63 Smarowanie ilością minimalną Wysokowydajny płyn chłodzący Ręczny pulpit sterowniczy Szablon głębokości Opcje Narzędzia Uchwyty narzędzi Automatyczny magazyn narzędzi do maks. czterech narzędzi standardowych Automatyczny magazyn narzędzi do głowicy kątowej Obrotowa głowica kątowa HSK-F63 na dwa narzędzia Urządzenie chłodzące Green-line do szafy sterowniczej z obniżonym zużyciem energii Czytnik kodów kreskowych Kabina ochronna, opcjonalnie z zamknięciem dookoła Standardowo cztery zaciski. Możliwe jest rozszerzenie do ośmiu zacisków Prawy referencyjny ogranicznik materiału do przykładania elementów z obróbką nadmiarowych długości Dodatkowy ogranicznik do obróbki nadmiarowych długości po lewej stronie Obustronny pomiar długości Zacisk podwójny oraz dodatkowe akcesoria po złożeniu zapytania Panel PC 18,5", procesor i5 Panel PC 21,6", procesor i7 Uchwyt na notatki Osłona dźwiękochłonna Utylizacja wiórów z wykorzystaniem wanien na wióry

Year of construction: 2005, condition: used, functionality: fully functional, machine/vehicle number: 1223030045, elumatec SBZ 122/30 profile machining centre, 3-axis controlled, machining length 3,850 mm - 2 tool magazines - 2 mitre heads - profile length measurement - 4 pneumatic clamps Fodpezgv Hwefx Al Asgh - automatic clamping adjustment - manual control panel - E550 control unit - spindle with 6 kW power - light curtain safety system Video of the machine in operation available upon request.

Condition: excellent (used), Year of construction: 2011, The machine in a very good condition. 7,6 meters long, 2 working places. Possible to give a warranty up to 6 month. Fgodpfeyia Ezjx Al Ash

Condition: used, Year of construction: 2013, We are offering for sale a two-head Elumatec ZS 720/00 LV welding machine, manufactured in 2005, designed for welding PVC profiles for the production of windows, doors, and frames. The two-head configuration allows for the simultaneous welding of two corners of the frame, ensuring precise processing and good productivity. The machine is characterized by its robust Elumatec construction and is suitable for professional use in companies that manufacture PVC window and door frames. Technical specifications: Manufacturer: Elumatec Model: ZS 720/00 LV Year of manufacture: 2005 Type: two-head welding machine Application: welding of PVC profiles Electrical supply: 3/N/PE – 380/400 V Frequency: 50/60 Hz Installed power: 5.2 kW Operating pressure: 7 bar CE marking Made in Germany Fgjdszmhuajpfx Al Ash The machine is used and is available at our location in Termini Imerese, Palermo. It can be viewed by appointment. Additional photographs, technical information, and videos can be provided upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Excellent technical condition of machine. Fgjdpezzxpkefx Al Aoh

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner Fgedpjx E Rd Djfx Al Ash After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel Fgjdpfx Alozzw Eds Aeh High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Year of construction: 2007, condition: ready for operation (used), Fgsdpfx Aeyt E D Tjl Aeh

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Fgodpfx Alezrhvuo Aoh

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. Travel distance X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows 10 control with new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light curtain areas, enabling pendulum operation A total of 8 material clamps Fgedpfx Aljwwukxs Aeh Spindle in very good condition, spindle-in-draw force: 12.5 kN Protective fence removed, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Year of construction: 2001, condition: used, Max. drum length: 7,500 mm Max. saw blade diameter: 550 mm Control E 550 Swiveling inside and outside motorized up to 140 degrees at both units (3-axis machine) Fgsdpezzmixjfx Al Ajh Pneumatic tilting of the angle between 45 and 90 degrees with digital angle display Minimum quantity spray device Machine is loaded free

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 21334, The ideal machine for curtain wall elements For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset EP 124 / EP 124/20 Pressing height 140 / 200 mm Pressing force 70 kN (7 t) Fedpsz H Afwofx Al Aegh Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 Kg We can ship the machine to your address via company DSV

Year of construction: 2010, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Fedpfx Ajzx D Rujl Ajgh Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control Windows XP with Elusoft Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle Right-angle gearbox with saw blade diameter up to 254 mm (only 90° cuts possible) Tensioner detection and automatic displacement 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, overall weight: 534 kg, Corner joining machine EP-124 Press stroke 140 mm Pressing force 70 kN (7 t) Pneumatic drive Fgedpez E Szfofx Al Aoh Electrical connection 230 V, 1 phase, 50/60 Hz Compressed air connection 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 534 kg

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Fgsdpswwtw Dsfx Al Aoh Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, Double miter saw for wood and aluminum profiles. Fgedozlytxjpfx Al Ajh Year of manufacture: approximately 1980. In 1989, a two-hand control system was retrofitted by Elumatec to ensure safe operation. The machine is suitable for cutting lengths from 255 to 4,500 mm. The sale is due to the closure of the business. The machine was fully functional and in use until the very end. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2013, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Fgodpezx U S Nefx Al Aeh Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Fodpszz Aqljfx Al Ajgh Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation, we can ship the machine to your address.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 1780020742, functionality: fully functional, The machine was used very little. Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Fsdpfxszmn N Ro Al Aogh Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle Fsdpfx Alszxc Swj Aegh - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Year of construction: 2005, condition: good (used), Double-head PVC profile welding machine. Fsdezdqpbepfx Al Ajgh