Used Elmag for sale (23)

Condition: good (used), Year of construction: 2023, Gear-driven drilling and milling machine GBFM 50 GAL Year of manufacture: 2023 Serial number: 03/C66 Drilling capacity: 50 mm Spindle travel: 180 mm Spindle taper: ISO 40 Speed range: 94-2,256 min-1 Weight: 2,000 kg Fpjdsz Tqx Tepfx Ah Ejp

Condition: good (used), Year of construction: 2010, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, quill stroke: 105 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 40 rpm, table length: 1,400 mm, table width: 400 mm, total height: 2,150 mm, total length: 2,300 mm, total width: 1,800 mm, overall weight: 3,600 kg, table load: 400 kg, Universal Milling Machine, capacity Ø 80 mm, swiveling head +/- 30, feed range X/Y/Z 1000/400/500 mm, table size 1400x400 mm, motor 7,5 KW, speeds 40-1800 rpm. stepless, ISO 50, quill travel 105 mm, depth 510 mm, digital readout on 3 axis, automatic and rapid feeds, coolant system, dimensions 2300x1800x2150 mm, weight ca. 3600 kg; accessoires into cabinet Fpodpeyzacbofx Ah Esp

Condition: used, Year of construction: 2008, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm Fedpfx Ahozf N Dts Espp - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor Fodpfxjzk Epcj Ah Eopp – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: as good as new (ex-display), operating hours: 39 h, power: 7.5 kW (10.20 HP), Elmag Profi-Line SILENT piston compressor PL-S 1100/10/270 - Compact unit incl. automatic condensate drain with connection accessories - Effective delivery rate 806 l/min - Suction capacity 1074 l/min Fpedpfou Nhh Tjx Ah Eep - Max. Max. operating pressure 10 bar - Oil-lubricated Yes - Tank volume 270 l - Rated motor power 7.5 / 10 kW / PS - Electrical connection Voltage / frequency 400/50 V/Hz - Sound pressure level (4 m) 68 dB(A) - Compressor speed 1000 rpm - Air outlet 1/2 inch - Length 1520 mm - Height 1530 mm - Weight 291 kg

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) Fsdpey Izausfx Ah Espp NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Request a quote!

Condition: used, Sandblasting cabinet Manufacturer: ELMAG Type: PAL-2N Year of manufacture: unknown Maximum workpiece size: approx. 50 x 70 x 50 cm Cyclone separator for abrasive recovery Pneumatic injector nozzle P/3 Fsdpoz Hmb Njfx Ah Espp Tungsten carbide blasting nozzle Safety foot pedal (start/stop) Extraction fan Dust filter bag New windows and new gloves P/3 injector Ø 3 mm: 600 l/min air flow P/3 injector Ø 3.5 mm: 800 l/min air flow P/3 injector Ø 4 mm: 1,200 l/min air flow P/4 nozzle Ø: 6 / 8 / 10 mm Dust-tight cover with quick-release fasteners Simple workpiece positioning Voltage/frequency: 400 / 50 V/Hz Cabinet interior: 60 x 88 x 78 cm Dimensions: 1,150 x 980 x 1,900 mm Weight approx.: 120 kg 121126ä

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Fodpfx Aexykafjh Eepp Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: used, Year of construction: 2001, - Manufacturer Elmag Superfici - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system Fsdpfx Ahjzf N Eqj Espp - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U Fedpfowlvlaex Ah Eopp quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Year of construction: 2009, condition: used, Driven roller conveyor with PVC-coated transport rollers for transporting workpieces. Power transmission via flat belt via transmission shaft. Absolutely smooth running even at high feed rates, feed frequency controlled. Technical data: Fpsdpfxjzf N E Dj Ah Eep - Year of manufacture 2009 - Transport length: 2,500 mm - Working width, usable: 1,300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 64 mm - Roller pitch: 125 mm - Adjustable feed rate (manual): 3-15 m/min - Installed power: 0.37 KW

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE Fpodey Hlxfepfx Ah Eop PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 32 mm throat 245 mm bore stroke 135 mm spindle taper MT 3 table-size 410 x 380 mm spindle turning speed range 10 - 2.100 U/min voltage 400 V total power requirement 1,1 kW Fpodpowlvk Nefx Ah Esp weight of the machine ca. 210 kg dimensions of the machine ca. 0,7 x 1,8 x 1,75 m - Threading device - Machine vice 150 mm - Drill cassette 9-piece 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: excellent (used), Year of construction: 2005, I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system 2-head UV-drying tunnel Cleaning unit with dust exhaust system Fedpfxoiuc R Hj Ah Ejpp Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Total width: 2,40m Weight: 4000kg Available immediately. Fully working.

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 178 mm, turning diameter over bed slide: 300 mm, center height: 178 mm, center width: 914 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,700 mm, total width: 750 mm, total height: 1,270 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, quill mount: MK 3, incl. 3-axis position display incl. RÖHM lathe chuck incl. quick-change toolholder 'set', Multifix system for further details see data sheet ELMAG warranty: 3 years (upon online registration after purchase) Delivery throughout Germany: FREE OF CHARGE NOT THE RIGHT MACHINE? WE ARE AN ELMAG AUTHORIZED PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE ELMAG RANGE! REQUEST A QUOTE! Fjdpfey Iy H Hjx Ah Eepp

Condition: new, Year of construction: 2025, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 65 mm, rapid traverse X-axis: 1,200 m/min, rapid traverse Y-axis: 1,200 m/min, rapid traverse Z-axis: 1,200 m/min, total length: 800 mm, table width: 400 mm, overall weight: 1,550 kg, ELMAG Tool Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and cost-effectiveness, sure to impress any metalworking professional. This top ergonomic design offers easy operation, stepless speed control, and outstanding value for money, making it ideal for workshops, training centers, and toolmaking. Standard Features: - Digital position display - 4 long milling arbors: 16, 22, 27, 32 mm - 3 reducing sleeves: MK 1, 2, 3 - Operating instructions / CE certificate Advantages: - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw drive on all axes X/Y/Z - Infinitely variable feeds on all axes - Coolant tank integrated into the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED worktable illumination - Vertical milling head with adjustable quill - Includes central lubrication system - Digital spindle speed display - Rapid traverse on all 3 axes - Swiveling milling head +/- 45° - Swiveling control panel - Digital position display for maximum precision on all 3 axes - Spindle rotation clockwise and counterclockwise - Digital speed display - Potentiometer for stepless feed axis control - Selector switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop switch Technical Data: Drilling capacity in steel: 50 mm Face milling capacity: 125 mm End milling capacity: 40 mm Spindle taper: ISO 40 Speed range: 40 - 2000 rpm Speed settings: stepless Quill stroke: 65 mm Table T-slots / width × spacing: 6 / 14 × 63 mm Vertical table T-slots / width × spacing: 3 / 14 × 63 mm Spindle nose to column distance: 180 - 580 mm Fodpoy Hlx Eofx Ah Eopp Table load capacity: 200 kg Milling head swivel range: ± 45° Spindle nose-to-table distance: 50 - 450 mm Horizontal spindle-to-table distance: 145 - 545 mm Milling table size: 800×400 mm Table travel X × Z: 500 × 400 mm Vertical table surface: 1020 × 225 mm Feeds X/Y/Z: 10 - 1200 mm/min Feed rates X/Y/Z: stepless Motor power: 3,700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Power supply: 400/50 V/Hz Machine dimensions: 800×400×450 mm Length × width: 1500 × 1700 mm Height: 2000 mm Weight: 1,550 kg The machine is located at our facility in 71334 Waiblingen-Beinstein, is available immediately, and can be inspected upon request. Please schedule an appointment in advance.

Condition: excellent (used), I sell the 2-cylinder roller coater Superfici Elmag FVR. Working width 1400mm Very good condition. Fully working. Available immediately. Fpodpoiuc R Rofx Ah Eop

Condition: new, Year of construction: 2024, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm center height over bed 125 mm centre distance 550 mm bed width 135 mm spindle bore 26 mm turning speed range - stepless 50 - 2.000 U/min power requirement 750 W 3-jaw-chuck diameter 125 mm Fedewlvk Ajpfx Ah Espp taper in tailstock-quill MK 2 dia. of quill 30 mm quill stroke 70 mm voltage 230 V weight of the machine ca. 120 kg dimensions of the machine ca. 1,25 x 0,60 x 0,50 m

Condition: used, Elmag metal lathe, good condition, approx. 1500 mm center distance, approx. 3000 kg Prices subject to change, errors, printing and typesetting errors reserved Fpsdpfx Asvrvmfjh Eep

Year of construction: 2002, condition: used, - Manufacturer: Elmag Superfici - Type: TT1-30 Fodox Url Ujpfx Ah Espp - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: used, Year of construction: 1997, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer Fpjdpfx Ahjzf N Edo Esp - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: new, bore capacity in steel (diameter) 16 mm throat 150 mm bore stroke 90 mm turning speeds 340 - 2200 U/min 243 x 243 mm total power requirement 0,5 kW / Volt weight of the machine ca. 42 Kg dimensions 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop Fjdpfx Aevdld Roh Eopp - tool set - documentation

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Fpjdpskxhqnsfx Ah Esp Emergency stop switch. lining protection Tool box, instruction manual.