Pillar Drilling Machine

ELMAG GBM 4-35 SGA

Condition: used, Year of construction: 2000, turning diameter over bed 440 mm turning diameter over slide rest 270 mm turning length 1.500 mm center height over bed 220 mm digital readout FAGOR 3 Achsen turning diameter in the gap 620 mm centre distance 1.500 mm bed width 280 mm spindle bore Ø 52 mm turning speed range 30 - 2.360 U/min 3-jaw-chuck diameter 250 mm quick change toolholder KLOPFER Typ GX2B drive capacity - spindle motor 6,3 kW taper in tailstock-quill MK 4 dia. of quill 60 mm quill stroke 200 mm voltage 380 V total power requirement 6,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,90 x 1,10 x 1,75 m Nsdpfx Alsykb Hfjnjlc - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm - Coolant device

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 146 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 35 A, cutting height (max.): 204 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, height adjustment type: electric, actuation type: electric, rotational speed (max.): 6,000 rpm, rotational speed (min.): 2,000 rpm, table height: 910 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, Altendorf F 45 EvoDrive plus (total price €52,050) + Air cushion table Nljdpfszbc Uxox Alnoc + Laser cut line indicator Machine with only 150 operating hours, being sold at a reduced price due to restructuring of a two-person operation. - CNC parallel fence, 1300mm with reinforced table extension - Reinforced 7.5KW motor with VARIO speed control, 2,000 - 6,000 RPM, stepless - Extended cutting height, 204mm - 2-axis scoring saw with LED warning light in the danger area - Cross slide extension, retractable - Miter fence with DIGIT LD, cutting lengths up to 3200 mm - Reinforced extension, 840 mm - On/Off switch on the sliding carriage - Front support roller - Toolbox

Condition: used, Year of construction: 2001, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Colour: Grey Price: On request - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/143039 - Spindle diameter [mm]: 40 Nledpfxjymlahj Alnec - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Njdpfoiknv Eox Alnjlc

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out Njdpfx Alsr H Df Isnolc - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Nljdpfx Alouiy Ngjnec Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Nedoy Ia Hmepfx Alnslc Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19703, Offer 22584 Technical data: - Welding current 320 A 60% ED - 270 A 100% ED - Welding current adjustable in 42 steps 40 A - 320 A - Digital volt + ampere display - Separate wire feed case with hose package approx. 1 lfm - intermediate package machine - wire feed case approx. 1,5 m - 4 roller wire feed steplessly adjustable - 2 stroke - 4 stroke - regulation - Spot welding - welding length / welding time adjustment - wire back firing adjustment - ground cable - pressure reducer Nsdpfxsp H Tu Ee Alnjlc - connection 400 V / 32 A / 18 kVA - Space requirement approx. W 550 x H 1200 x D 1100 mm - Weight approx. 300 kg

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,300 h, power: 102.97 kW (140.00 HP), motor manufacturer: Deutz, machine/vehicle number: WSXCZ20200TD10041, Equipment: air conditioning, cabin, front power take-off, TTV transmission Front axle and cab suspension Njdpjyalwtjfx Alnolc Front linkage with PTO

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Nedpfevxhfmox Alnslc Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg