Center lathe

ELMAG PROFI 914/150

Condition: good (used), Conventional lathe, Pinacho model ML 18-250, year 2019. Distance between centers: 1,500 mm, main spindle bore: 58 mm, chuck diameter: 250 mm, swing over bed: 502 mm, bed width: 300 mm, Fagor Innova digital readout. Itedpfx Ahszcxnwjbon

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 Ijdpfsxykafjx Ahbjtn - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: used, Year of construction: 1996, greates pass round over bed 350 mm swing diameter over face slide 200 mm centre distance 800 mm centre height 175 mm turning length 700 mm 3-jaw chuck Röhm Ø 160 spindle bore 46 mm spindle head Gr. 5, DIN55027 number of spindle speeds 18 spindle turning speed range 31,5-2500 U/min tailstock quill taper MT 3 weight of the machine ca. 1000 kg Joystick control 3-axis digital display Rotating center point Chip guard Multifix tool holder, size E, with 3 interchangeable cassettes Adjustable machine feet Coolant system Itedpfx Ahsy Ez Dzeben Worklight Operating instructions included Very good condition, The machine comes from a training workshop at a large corporation

Condition: excellent (used), Year of manufacture: 1973 Distance between centers: 500 mm Distance between centers (vertical): 125 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 120 mm Spindle bore: 32 mm Spindle nose: Camlock D1-3 Spindle speed: 225 - 3000 rpm Tailstock quill: MK 2 Weight: approx. 930 kg Dimensions W x D x H: approx. 1473 × 730 × 1280 mm Iedpfezyyn Ssx Ahbjtn Condition: very good Accessories: see pictures Through hole in the chuck: 28 mm Collet system: Schaublin B32 Automatic feed: 4 - 260 mm/min Cuttable metric threads: 0.25 to 8 mm Cuttable inch threads: 112 to 3 threads per inch

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Equipment: documentation/manual, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Iedpfx Aheyr Ihlobotn Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Lubrication pump Chuck key and toolpost wrench Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: ready for operation (used), Year of construction: 2007, Main motor (kW): 27 Infeed device Saw length (mm): 3300 Saw width (mm): 3300 Panel thickness (mm): 40 All specifications are manufacturer’s data. Iedpfx Aezgwpgohbetn

Condition: used, Year of construction: 2011, turning diameter over bed 350 mm turning diameter over slide rest 216 mm turning length 1000 mm Itsdpfxszlkvqs Ahbjn turning diameter in the gap 550 mm turning speeds 40 - 1800 U/min centre height 170 mm spindle bore 40 mm total power requirement 4,0 KW weight of the machine ca. 0,7 t dimensions of the machine ca. 2,0 x 0,85 x 1,6 m Centre lathe (lead screw and feed rod) - Digital readout - 3-jaw chuck (160 mm) - Spare jaws - Coolant system - Multifix tool post - 4 Multifix tool holders - Steady rest - Live centre - Chip tray - Chuck guard

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Itsdpoyr R Dcjfx Ahben Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Condition: used, Year of construction: 2023, gebraucht 2023 1675 prompt, Zwischenverkauf v Bulgarien 17600 € 1 325 mm 1000 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 MK 12 85 - 2.000 1/min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 75 - 2,5 Gänge/" 0.1 - 1.75 150 mm 95 mm 40 mm 3 MK Iedpswirwyofx Ahbjtn 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg demo machine / mint condition net price (price for new machine € 23.970,00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" incl. following optional equipment: 1 lenght stop BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine Iedpfsyvh Hqsx Ahbjtn The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification • Model: ZX7045B VARIO • Max drilling capacity: 45 mm • Max face milling diameter: 80 mm • Max vertical milling diameter: 32 mm • Max tapping capacity: M12 • Spindle taper: MT4 • Spindle travel: 130 mm • Spindle speed: 100 – 3200 rpm • Speed control: variable • Max distance spindle–table: 450 mm • Distance spindle axis–column: 286 mm • Table travel X: 580 mm • Table travel Y: 200 mm • Table size: 800 × 240 mm • Head: tilting ±45° • Motor power: 2.2 kW • Power supply: 400 V • Machine dimensions: 860 × 740 × 1200 mm • Weight: 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.