Used Bas 450 Db for sale (7,100)

Condition: excellent (used), Year of construction: 1989, Elektra Beckum Bandsaw BAS 450 DB Year of manufacture: 1989 Cutting height: 300 mm Blade length: 3,380 mm Fgsdpfx Aoyy U Txokysh Motor power: 1.5 kW Weight: approx. 120 kg Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Fgedpfxszghf Eo Akyeh

Condition: used, Year of construction: 2015, Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Fgodpfjz Rkcaox Akyoh Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 kN Upsetting force (max.) 10 kN Air pressure (min.) 6 bar Air consumption per cycle 52.6 Nl (at 6 bar) Cooling water consumption 4–5 l/min (20–25°C) Machine weight approx. 800 kg Dimensions W/D/H 1214 / 957 / 1982 mm Connection voltage 380–420 Bi-metallic / carbide bandsaws 6×0.40 – 54×1.60 Wood saw blades 6×0.40 – 50×1.10 Stainless steel saw blades 10×0.40 – 40×0.80 Strip blades 6×0.40 – 50×1.00 Steel strip S235JR max. 150 mm² Stainless steel max. 60 mm² Max. clamping width 50 mm

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length - 120 - 450 mm max. cutting height Fgedpogp Su Eofx Akysh - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Condition: like new (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 18,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,750 mm, mount diameter: 220 mm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 1,800 rpm, table load: 75,000 kg, coolant supply: 70 bar, spindle motor power: 1,000 W, workpiece weight (max.): 75,000 kg, feed length W-axis: 1,400 mm, MOBILE COLUMN BORING MACHINE WITH DOUBLE TABLE FPT INDUSTRIE SPIRIT 450 Technical specifications Type: Mobile column boring machine with double table Brand and model: FPT Spirit 450 CNC: Siemens Sinumerik 840D Installation: 2017 Technical data Axis travels: X: 18,000 mm Y: 5,000 mm Z: 1,750 mm W: 1,400 mm B: 360° V: 3,000 mm U: 400 mm Maximum workpiece dimensions: Dimensions of each table: 4,000 x 3,000 mm Maximum machinable height: 5,000 mm Maximum load capacity: 75 tons Positioning accuracy: 0.05 mm Spindle speed: Up to 3,600 rpm with TUPC-M head Normal speed: 1,800 rpm Spindle power: 100 kW Fgsdpfx Aez Hl A Eokyoh Tool types: ISO 60 C.F. ISO 50 ISO 50 C.F. CAPTO C8 Boring bar diameter: Ø220 mm RAM: 650 x 560 mm Accessories and automation 2 rotary-movable tables with dimensions 4,000 x 3,000 mm each. Automatic tool changer for ISO 60 and ISO 50, via a storage and management system with a KUKA anthropomorphic robot. Manual tool changer for CAPTO C8 for the D’Andrea UT5 head. Measuring probe installed on the machine: SONDA PROBE RPM600 (RENISHAW). Coolant and lubrication system Internal and external cooling via cutting fluid: Internal cooling of the boring bar tool: Pressure: 70 bar Flow rate: 80 l/min Internal cooling of the head tools: Pressure: 40 bar Flow rate: 28 l/min External cooling of the tool: Pressure: 4 bar Flow rate: 28 l/min Internal and external air system for cooling the tool when cutting fluid cannot be used. Heads and accessories TU144: Universal roughing head ISO 50, with angular indexing every 2.5°. Maximum spindle speed: 1,800 rpm. TUPC: Universal finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 1,800 rpm. TUPC-M: Universal multiplied finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 3,600 rpm. D’Andrea UT5 head: Head for turning with CAPTO C8 tools. Maximum spindle speed: 251 rpm. ISO 60 spindle: Main spindle. Maximum speed: 1,800 rpm. ISO 50 reduction for finishing: Maximum speed: 1,800 rpm. ISO 50 reduction for roughing: Maximum speed: 1,800 rpm. Long ISO 50 reduction: Maximum speed: 1,800 rpm. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. Fgjdpsyn E H Rsfx Akyeh The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,975 h, machine/vehicle number: 00110813-06.17, control type: CNC control, actuation type: electric, controller manufacturer: Schneider Electric, controller model: Magelis, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 9,975 h, laser power: 450 W, laser wavelength: 1,050 nm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, working length: 500 mm, working width: 500 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, input voltage: 1,200 V, input current: 30 A, type of cooling: air, total length: 1,180 mm, total width: 1,343 mm, total height: 1,341 mm, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used ALPHALASER AC 450 F laser cutting machine, manufactured in 2017, for sale. Manufacturer: ALPHALASER Model: AC 450 F Year of manufacture: 2017 Laser operating hours: 9975 hours Fodpfx Asz Ahzfjkyjgh without dust extraction system If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 1970, Vertical impact testing machine, complete with all accessories. Fgjdpfxoz N Spxo Akyjh Diameter up to 450 mm.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades Fsdszwhwvepfx Akyjgh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Maximum wall thickness: 8 mm Fsdpfx Aksz Im Raeyjgh Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg

Condition: used, Year of construction: 2017, machine/vehicle number: 19665, CNC cylindrical grinding machine Willi Göbel GRS-II-450, Serial No. 19665/17, Year of manufacture 2017 Fgedpfx Akjz Nn Droysh with Siemens Sinumerik control The machine can be purchased through an online auction on our website, which you can access by clicking on the advertisement. The auction ends on October 19, 2026, and will run until October 22, 2026.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, EMCO EMCOMAT FB-450 MC | DEMO | Sinumerik 828D | Warranty Description EMCO EMCOMAT FB-450 MC – DEMO machine in like-new condition Universal CNC toolroom milling machine equipped with a SIEMENS Sinumerik 828D control. The machine was manufactured in 2019 and has never been used in production. It was used solely as a demonstration machine and has very low operating hours. The machine is in excellent, near-new condition and is offered with extensive accessories included in the price. 6-month warranty on spare parts included. The EMCOMAT FB-450 MC is a highly versatile machine suitable for toolrooms, prototype production, maintenance departments, and precise single-part or small-batch production. It allows both vertical and horizontal milling. Technical specifications Working area X-axis travel: 450 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle center distance: 40–440 mm Rapid traverse X/Y/Z: 5,000 mm/min Working feed X/Y/Z: 10–5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Table Clamping surface: 800 × 400 mm Maximum table load: 300 kg Spindle Spindle speed: 10–5,000 rpm Spindle power: 10 kW Tool interface: ISO 40 Fjdpfx Akjz Dib Tsyegh Machine CNC control: SIEMENS Sinumerik 828D Dimensions (L × W × H): 1,980 × 2,030 × 1,990 mm Machine weight: approx. 2,270 kg Year of manufacture: 2019 Included equipment SIEMENS Sinumerik 828D CNC control Electronic handwheel Rotary table/turntable for vice Support arm for horizontal milling Installation rubber pads Side storage holders for 27 milling tools Set of 12 ISO 40 milling tool holders, including holders for horizontal milling Machine manual 6-month warranty on spare parts Condition DEMO / LIKE NEW The machine has never been used in regular production and was operated only for demonstration purposes. Machine can be inspected and demonstrated under power by prior appointment. Available for delivery.

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Clamping unit: Fedpez Ipfmsfx Akyjgh Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (available for an additional charge) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (extra charge for high-speed operation) Wemo 6-5 xDesign robot Year of manufacture: 2017 4-axis robot: 3 axes driven by electric servomotors Robot safety package included Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR net (price without robot)

Condition: used, Year of construction: 2018, travel distance X-axis: 510 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 70 m/min, feed length X-axis: 510 mm, feed length Y-axis: 600 mm, feed length Z-axis: 700 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 70 m/min, nominal power (apparent): 63 kVA, torque: 900 Nm, workpiece height (max.): 490 mm, workpiece diameter (max.): 535 mm, workpiece weight (max.): 200 kg, total height: 3,470 mm, total length: 4,150 mm, total width: 3,120 mm, table load: 200 kg, rotary table diameter: 450 mm, rotational speed (max.): 80 rpm, overall weight: 18,000 kg, distance between spindles: 540 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this very well-maintained, twin-spindle, 5-axis machining center, MAG SPECHT 450 DUO, manufactured in 2018. Manufacturer: MAG / FFG Machine Type: SPECHT 450 DUO Year of Construction: 2018 Condition: very good Operating Hours: 15,908 hours Machine Number: X.0112.6552 Order Number: E.7500194.001 Wiring Diagram Number: E.7500194.001 Location: 36199 Rotenburg an der Fulda, Germany Inspection: possible under power The machine is designed as a highly productive, twin-spindle machining center for series production and features 5-axis machining, two working spindles, and HSK-A63 tool holders. Technical Data: Year of Construction: 2018 Machine Number: X.0112.6552 Fedpfx Aoz Ar H Sskyogh Number of Spindles: 2 Machining: 5-axis Tool Holder: HSK-A63 Travel X: 510 mm Travel Y: 600 mm Travel Z: 660 / 700 mm Axis Speed X/Y/Z: up to 70 m/min Spindle Distance: 540 mm B-/A-Axis: up to 80 rpm B-Axis Division: 360° x 0.001° Table Plate Diameter: 2 x 450 mm Table Load: 2 x 200 kg Max. Interference Diameter of Workpiece/Fixture: 2 x 535 mm Max. Workpiece and Fixture Height: 490 mm Max. Weight Moment at 90°: 900 Nm Tool Magazine: 112 tool positions HSK 63 Tool Diameter with Full Load: 75 mm Tool Diameter with Empty Spaces: 140 mm Max. Tool Length: 550 mm with front loading Max. Tool Weight: 12 kg Total Weight of Tools in Magazine: max. 420 kg Accuracy / Measuring System: Path Measuring System X/Y/Z: 0.0001 mm Positional Accuracy: 0.005 mm Positional Repeatability: 0.004 mm Machine Dimensions: Width: approx. 3,120 mm Length: approx. 4,150 mm Height: approx. 3,470 mm Machine Weight: approx. 16,000–18,000 kg Electrical Rated Power according to Nameplate: 63 kVA Operating Voltage: 400 V / 50 Hz The machine can be inspected under power at the Rotenburg an der Fulda location by appointment. Technical documentation is available. Sale from location. Subject to prior sale and errors in the technical data.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Fgodpfozr H Aaex Akyjh Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, 1 used cutting and punching machine Manufacturer: BOGRAMA AG, Switzerland Type: BSM 450/220/15/Plus Year of manufacture: 2006 Machine No.: 232/06 Technical data / Equipment: - Cutting and punching machine - Working width up to approx. 450 mm - Product width up to approx. 220 mm - For cutting, punching and perforating - Punching thickness with Servo-Plus version up to max. 4 mm - Pneumatic connection: max. 6 bar - Robust design for professional use in post-press processing The technical specifications are based on the BOGRAMA data for this machine series; individual values may vary depending on the equipment of the specific machine. Fgedpfx Asz I Uf Sokyeh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Max. turning diameter: 340 mm Fsdpfxez D Tt Ts Akyegh Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor - One-touch IGF - Touch setter - Main spindle Kitagawa B210 - Coolant system

Year of construction: 2002, condition: excellent (used), functionality: fully functional, BOGRAMA Punching Machine – Multi BSM 450/220/15 - Manufacturer: BOGRAMA AG, Switzerland - Type: BSM 450/220/15 - Year of Manufacture: 2002 - Machine No.: 038/02 - Working Width: max. 450 mm - Performance: up to approx. 12,500 cycles/hour (depending on material and format) - Punching/Cutting Thickness: - Hole perforation: up to approx. 2 mm - Binder hole: up to approx. 5 mm - Cutting: up to approx. 5 mm - Strip steel cutting: material-dependent - Sheet Alignment: pneumatic front and side guides - Cycle Control: via photocell - Compressed Air Connection: 6 bar - Electrical Connection: 3 × 400 V / N / PE, 50/60 Hz - Fuse: 32 A Fgsdpfez I Ug Ajx Akysh - Applications: Punching, cutting, perforating, and hole punching

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Fodpjz D Hyyjfx Akyogh Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Year of construction: 2026, condition: excellent (used), functionality: fully functional, BMD-1000-2-N METAL DETECTOR 1000MM CONVEYOR WIDTH APPLICATION Fodpfx Akjzmnwnsyjgh SENSITIVITY ADJUSTMENT FOR METAL DETECTION RIVET SENSOR ADAPTATION FEATURE AVAILABLE VISUAL AND AUDIBLE WARNING CONTROL BOARD INCLUDED

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,500 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 830 mm, controller manufacturer: SIEMENS, controller model: 840 D Operate 4,7, number of slots in tool magazine: 12, number of axes: 4, This 4-axis DMG MORI CLX 450 V6 was manufactured in 2019. It features a maximum Z-axis travel of 830 mm and X-axis travel of 750 mm, along with a counter spindle capable of 5000 rpm. The machine includes a bar package, pneumatic workpiece ejection device, and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V6 horizontal turning machine we have for sale. Contact us for further details. • Counter spindle: A2-6, 5000 rpm • Tailstock function for counter spindle • Alternating speed cycle (control function) • Hand wheel Additional equipment • Bar package and bar feeder interface • Hainbuch Spanntop NOVA combi pull-back, size 80 (main spindle collet chuck) • Pneumatic workpiece ejection device for counter spindle • SMW BB-D 210 for counter spindle (chuck) • High-pressure coolant, 12 bar • Coolant spray gun • Marposs manual tool measuring probe • Chip conveyor • Bar feeder (will follow) • All tool holders shown in pictures (will follow) Technical Specification Fedpoz Ibqzjfx Akysgh Counter Spindle Yes Driven Tools Yes Taper Size VDI 40

Condition: excellent (used), Year of construction: 2021, Great opportunity to buy an outstanding universal turning center (milling and turning) including automation with the Robo2Go: a flexible workpiece loading and unloading system with a six-axis-industrial-robot. The CLX 450 TC was built in 2021 and first used for actual production in 2022. About 9300 operating hours and only 3800 spindle hours. The Robo2Go was built in 2018, but is actually 'like new', because it was barely used. CNC control Celos X with SIEMENS Sinumerik One Max. turning diameter 400 mm Turning length 1100 mm Bar capacity max. 65 mm X-axis travel 276 mm Z1-axis travel 755 mm Z3-axis travel 775 mm Y-axis travel +/- 100 mm B-axis travel +/- 120° Tool holder HSK-T 63 Tool changer 60 positions Additional 1,000L coolant tank with programmable pressure 80-bar through-spindle cooling 60-tool tool changer Safety fence around robot Please check the full technical specifications and options in the attached documents. Optional: Large set of HSK-63 toolholders (without the inserted tools) The machine can be viewed in operation upon appointment. More pictures and videos available on request. Fjdpfx Aez Eg H Ajkysgh

Condition: used, Year of construction: 1994, functionality: fully functional, power: 2 kW (2.72 HP), cutting height (max.): 153 mm, cutting width (max.): 250 mm, saw blade diameter: 450 mm, saw blade bore: 40 mm, GRAULE AS 450 – Notching saw Technical data: Fgedpfxez Dpwuj Akyjh Motors: 2 × 3.0 kW / 400 V Speed: 2,800 rpm Saw blade diameter (vertical): 450 mm Saw blade diameter (horizontal): 350 mm Saw blade bore: 40 mm Notching height: max. 153 mm Notching depth: max. 110 mm Notching width: max. 250 mm Feed: manual Compressed air connection: 6 bar Machine weight: approx. 400 kg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,928 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 276 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 755 mm, spindle motor power: 25,500 W, overall weight: 6,250 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DMG MORI CLX 450 V6 was manufactured in 2021. It features a maximum turning diameter of 400 mm, X-axis travel of 276 mm, Y-axis travel of ±60 mm, and Z-axis travel of 755 mm. The machine is equipped with a 12-position VDI 40 turret and a powerful spindle with a maximum speed of 4,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CLX 450 V6 machine we have for sale. Contact us for further details. • Control: Siemens 840D with ShopTurn • HMI: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Spindle operating hours: approx. 2,928 hWorking capacity and axes • Axes: X, Y, Z; C-axis on main and counter spindle • Max turning diameter: 400 mm • Swing over bed: 700 mm • Swing over cross slide: 370 mm • Rapid traverse: X/Z 30 m/min; Y 22.5 m/minMain spindle • Spindle nose: A2-8 • Bar capacity: 80 mm • Power: 25.5 kW (40% ED) / 17 kW (S1) Fgsdpjz Inlxjfx Akyoh • Torque: 426 Nm (40% ED) / 283 Nm (S1) • Differential clamping pressure functionCounter spindle • Max speed: 5,000 rpm • Spindle nose: A2-6 • Power: 14 kW (40% ED) / 13 kW (S1) • Torque: 192 Nm (40% ED) / 171.5 Nm (S1) • Differential clamping pressure function • Internal chuck flushing • Auxiliary tailstock functionTool turret and driven tools • 12-position VDI 40 turret with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW (40% ED) / 20 Nm (40% ED)Equipment/options (machine-integrated) • Setup package: 12-bar coolant supply system; 5-bar coolant washdown gun • Safe clamping package • Connectivity: DMG MORI IoTconnector; DMG MORI Messenger V4 • Siemens software options: Multi Threading 2.0; Variable spindle speed; Y-axis parting cycle; Keyway Broaching cycleElectrical data • Supply voltage: 400 V ±10%, 50 Hz • Phases: L1, L2, L3, N, PE • Connected load: 39 kVA • Max rated current: 56 A Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Fgodpfxjtrd T Te Akyjh Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR