Used Electroplating Bath for sale (412)

Condition: used, maximum load weight: 1,792 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 03/2025, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,100 mm, total height: 1,000 mm, A27 GW26NGA00001 Car Transport Trailer STEMA FHAK 25-40-21.2 Vehicle transport trailer, 2-axle trailer, type AT2035, gross vehicle weight: 2.5 t, flatbed, equipped with 10'' tires, loading area: wooden floor, additional ramps for lowered vehicles, overrun braked, 100 km/h approval, with WAP901 cable winch and manual hydraulics. Main frame: Extremely robust and torsion-resistant, with crash-tested safety V-drawbar. Tiltable, sturdy frame construction with safety locks. All frame components are hot-dip galvanized by immersion bath, providing corrosion resistance. Rbodpfoyn Ugmsx Ahvew Running rails: Extra-wide, perforated, non-slip running rails made of galvanized steel sheet with large elongated holes for securely fastening lashing straps. The extra-wide rail allows for easy transport of vehicles with various wheelbases. Attached loading ramps ensure easy loading and unloading. Side panels: Signal red powder coating (corrosion-free and resistant to scratches) for increased safety. Vehicle not reconditioned ...and many more features. Subject to errors and prior sale.

Condition: excellent (used), 4-lane depositing line with AFT depositors. Each lane has a belt width of approx. 700 mm. The first depositors is for liquid. The second depositing system is for ice cream. The third depositing system is for liquid and fruit and forth is for fruit and the fifth is for sprinkles and swirls. Approx. dimensions 15 m long Rbedpfevg Hl Iox Ahvsw

Condition: excellent (used), Urschel comitrol 3600 emulsifier Rbedouy Ttcepfx Ahvew

Condition: excellent (used), ATIA Industries Starflex layered dessert pot Filling Line: 5 depositing heads for liquids, mousses, jellies etc., Also station for crumbles, sprinkles etc., Trifle, cheesecake, jelly. Dies for 4 pots at a time circular 3 inch also a square pot 2 1/4 inch square. Heat sealing film on top of the pots. 11 meters long x 4 meters wide. Rbjdpfsvg A Hzjx Ahvew

Condition: excellent (used), WHM 4-lane depositing system. Depositor 1 & 2 can do sauce and fruit. depositor 3 does liquid. depositor 4 sprinkles and swirls then the last station is for swirls. Dimensions approx. 12 m long x 2.1 m x 750 mm high. Belt width approx. 180 mm. Includes conveyoring above for the delivery of fruit from the Rospen system Rbsdpevg E Nxsfx Ahvjw

Condition: excellent (used), Risco mixer 450 litre. With forward and reserve and front end discharge. Brand new electrical panel. Redpfx Ajumcadehvsbw

Condition: excellent (used), Risco vacuum filler with depositing head. was working in the bakery industry Rodjufyuujpfx Ahvsbw

Condition: excellent (used), functionality: fully functional, 1 x Blendtherm sauce cooker. All s/s. With full process control. Steam jacketed, front end discharge, with side wall scrape mixing action. Internal dimensions approx: 1.5 m x 750 mm x 600 mm. Overall dimensions: 2.5 m x 1.1 m x 1.8 m high Rbodpfsvxgy Aex Ahvow

Condition: excellent (used), functionality: fully functional, 1 x Blendtech single shaft ribbon blender rice cooking system with side scrape. On weigh cells. Front end discharge. Dimensions of vessel approx. 900 mm wide x 900 mm deep. Rsdpjvxg Awofx Ahvjbw

Condition: excellent (used), kay engineering 600 litre jacketed cooking vessel with side wall scrape and emulsifier. On weigh cells. All S/s. Was previously doing soups with particles and smooth soups without particles. Rbedeu Aud Iepfx Ahvew

Condition: excellent (used), functionality: fully functional, tank capacity: 300 l, total length: 1,200 mm, total width: 1,200 mm, total height: 1,100 mm, 5 x Nilma Brat Pans. Direct gas cooker. Tilting Rbodpfx Asvy E Dvohvew

Condition: excellent (used), Complete Deighton 200mm wide battering, breading and frying line. With wire belt infeed, Preduster, batter applicator wire type and breading machine with electric fryer. Capable of flash frying 180/200kg of product a hour Rbjdpfxsu Uuawe Ahvow

Condition: excellent (used), Year of construction: 2017, Stephan micro cut model MCH20FS with a ceia metal detector Rodpfx Ahjufylajvebw

Condition: excellent (used), Glass cooking wok 300 litre and side wall scrape. With thermial oil boiler. Tilts both sides. Rbodpfx Ahjumb Hievsw

Condition: excellent (used), Year of construction: 2020, Complete filleting line. Includes a Baader IS-026 heading machine with take off conveyor. Into BADDER 588 filleting line Working range (approx.) Cod: 400–2,500 g / 35–70 cm Haddock: 400–2,300 g / 35–65 cm Rjdpfx Ahju Dahbjvebw Saithe: 400–2,000 g / 35–62 cm Hake: 160–800 g / 20–47 cm Alaska Pollack (h+g): 150–450 g Throuput Up to 35 fish/ to 40 fish/min. With trimming / packing conveyors. Video is available of the complete line running on request

Condition: excellent (used), functionality: fully functional, Rondo comas HD 3000 pastry sheeter Rodpfx Ahjt Twp Hovobw

Condition: excellent (used), Robert riser roto claw its just had brand new electrics. Handles blocks up to 9.5’’ thick and 21’’ wide. Blocks can be stacked using the built in air operated loader to achieve higher production. Rbodpfx Asur Ngushvsw

Condition: new, x-travel 1000 mm y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 300 mm feed: 30-830 / 23-625 mm/min. turning speeds 45 - 1660 U/min distance spindle /table 60 - 460 mm rapid traverse Z Achse 750 mm/min throat 95 - 575 mm total power requirement 3.0 kW weight of the machine ca. 1505 kg range L-W-H 1740 x 1860 x 1900 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath Rbodsxaak Topfx Ahvow - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Rsdpfjxlu Taex Ahvjbw

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Redew Ixw Aspfx Ahvobw Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump ##### Redpfst Uzitox Ahvjbw RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: new, functionality: fully functional, Basket Washing Machine MRS - WASH 1200 Application: The device is designed for washing components of various sizes and weights. The washer is equipped with a mechanically driven rotary basket powered by a motor and spray nozzles. Operating Description: After switching on the main power, the bath heating process begins. Once the set temperature is reached, the washing cycle can be started. The primary washing phase is the first step, and its duration can be continuously adjusted using the timer located in the control box. When the set time elapses, the bath will end automatically. STANDARD EQUIPMENT OF THE WASHER: Rbsdpexnlpdsfx Ahvew * Safety cover switch that disconnects during opening in the washing process * Liquid level sensor in the tank preventing dry operation * Temperature sensor * Single spray arm * Mechanically rotated basket * Double filtration system * Coarse mesh filter for insoluble contaminants (1mm mesh) * Drain valve Technical Data: Basket diameter: 1200mm Working height: 500mm Basket capacity: 300kg Working time programmability: 0-99 min Washing temperature: 60°C Heater power: 12kW Tank capacity: 400l Spray performance: 200l/min Spray working pressure: 4.5bar Overall width: 1750mm Overall depth: 1750mm Overall height (closed/open): 1250/2400 mm Power supply: 3~400V OUR OFFER INCLUDES OTHER MODELS OF AUTOMATIC BASKET WASHERS FROM THE MRS WASH SERIES WITH SIZES 800, 1000, 1200, 1500, AND EVEN 1500 XL. PLEASE CONTACT US FOR OFFERS ON OTHER MODELS.

Condition: new, functionality: fully functional, warranty duration: 12 months, total width: 2,200 mm, total length: 1,050 mm, total height: 2,300 mm, type of input current: three-phase, Felgen Cleaner is a tank designed for removing paint coatings. It is used in wheel refurbishment, especially for wheels with complex designs. Wheel etching, i.e. cleaning residues using a chemical bath, is a process that removes all paint layers from the wheel surface. This machine holds approximately 800 liters of liquid and is equipped with a temperature and bath time control system. Additionally, an oil jacket is used to ensure an even temperature distribution inside the tank. This solution allows chemicals from almost any manufacturer to be used, even at eighty degrees Celsius. It features a winch: an integrated lifting and lowering mechanism for the load basket, allowing wheels to be placed inside without the need for external devices—making it a fully autonomous workshop solution. Felgen Cleaner is equipped with: - control panel - agitator - heating elements - drain valve - lid - tank - winch Technical specifications: Power supply: 400/230V 50Hz Overall dimensions (W x D x H): 2200/1050/2300 mm Tank dimensions (W x D x H): 1490/750/750 mm Rodpfx Ahjxm Twyevobw Basket dimensions (W x D x H): 1275/615/155 mm Basket load capacity: 150 kg Programmable cycle time: 0-99 min Tank capacity: 800 L Washing temperature: 90 °C Heater power: 3 x 4 kW

Condition: new, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, table length: 1,600 mm, table width: 500 mm, Fully operational, heavy-duty FU series milling machines equipped with infinitely variable feed speed control on all 3 axes, including rapid traverse mode, and a 3-axis digital display. The FU line features a multi-universal milling head with 360-degree rotation. Electrical components supplied by the renowned Schneider Electric. ISO 50 spindle taper, table size 1600x500 mm. Equipped with a class-leading SERVO axis feed drive. Rodpfxoytffqj Ahvebw Key Features: - Infinitely variable feed speed adjustment on all 3 axes, with rapid traverse in all axes - Universal milling head with patented "HURON" system, adjustable at any angle - Swiveling control panel with ergonomically arranged switches - Heavy-duty, solid cast iron construction ensuring vibration-free operation - All guideways are hardened and ground - Precision ball screws on all axes for enhanced machining accuracy - Centralized lubrication system - Automatic table feed for X, Y, Z axes, including rapid feed for all axes - Large, robust T-slotted table designed for maximum loads - 3-axis digital display ensures maximum work efficiency - Safety guards complying with the latest CE standards - Quiet operation due to ground and hardened gears in the oil-bath gearbox - State-of-the-art axis feed technology - High performance maintained even under heavy load - Precision and dynamics on par with modern CNC machines - Greatly reduced backlash for exceptional accuracy - Integral actuator characteristics, delivering a theoretically zero static error - Thanks to feedback, the servo drive can detect overload or positional errors. Upon such detection, the controller immediately halts all machine axes. Technical Specifications: - Table size (width): 1600 mm - Table size (depth): 500 mm - Spindle taper: ISO 50 - Spindle speed range: 30 – 2050 rpm - Number of spindle speeds / Infinitely variable: 27 - Travel X-axis: 1200 mm - Travel Y-axis: 700 mm - Travel Z-axis: 500 mm - Spindle to table distance: 50 – 550 mm - Spindle to column min.: 28 mm - Spindle to column max.: 728 mm - Max. table load: 1800 kg - Automatic feed X-axis: 10 – 1000 mm/min - Automatic feed Y-axis: 10 – 1000 mm/min - Automatic feed Z-axis: 5 – 500 mm/min - Rapid traverse X, Y, Z: 2200 / 2200 / 1100 mm/min - T-slots (quantity, size, spacing): 5 / 18 / 80 mm - Motor power: 7.5 kW - Dimensions (width): 2200 mm - Dimensions (depth): 2285 mm - Dimensions (height): 2100 mm - Weight approx.: 4500 kg Scope of Delivery: - LED work lighting - Cooling system - Centralized lubrication - Table feed for X, Y, Z axes - Coolant tray - 3-axis digital display - Adjustable guards with modern safety features - Service tools - Servo drive - Legally required safety guards - Complete DTR technical documentation (Polish) - CE certificate - 24-month comprehensive warranty at no additional cost

Condition: ready for operation (used), Year of construction: 2020, An automation machine Infinite Technologies and Robotics (CN) for automated assembly of clips on electroplated chrome trim strips is available. Clips per component: 6, component geometries: 4, pressing force: 100N, pressing force tolerance: +/-10N, positioning tolerance: +/-0.3mm. Sliding tables: 2, sliding table dimensions X/Y/Z: 1180mm/770mm/15mm, sensors: 4. Tool holders: 2, holder dimensions X/Y/Z: 740mm/490mm/190mm, max. holder weight: 20kg. Axis systems: 2, travel X/Y/Z: 800mm/400mm/300mm, max. speed: 250mm/s, spindle pitch: 5mm, payload: 330N. Machine dimensions X/Y/Z: approx. 3700mm/2250mm/2300mm, weight: approx. 3000kg, control: Siemens S7. Including vision system Keyence, sensors Sick and pneumatics SMC. Documentation available. An on site inspection is possible. Rbodpsyrta Tsfx Ahvsw