Used Electroplating Bath for sale (429)

Condition: used, This listing is for the VWR Digital Heatblock 11 Drybath The unit is in full working condition and is ready for immediate use Core Features & Capabilities Precision Temperature Control Uses PID microprocessor control, typically offering stability and uniformity as precise as ±0.1 °C. Temperature range often spans from ambient +5 °C up to approximately 120 °C, with some models reaching 150 °C, depending on configuration. Flexible, Modular Design Psdpfxjxhfgpj Ahcsra Supports interchangeable modular aluminum blocks, accommodating a wide range of vessel types—microtubes, PCR strips, centrifuge tubes, vials, and microplates. These blocks often include a thermometer well and are engineered for close tube-to-block contact to maximize heat transfer. Digital Interface & User Safety Features LED or touchpad controls, with separate displays for set-point and actual temperature, plus a timer function with audible alarm when the set time or temperature is reached. Equipped with safety enhancements such as a “Hot” warning light when the block temperature exceeds around 40 °C. Calibration mode often allows you to calibrate using an external temperature device (RTD probe). Versatility & Applications Ideal for a broad range of lab uses including enzyme reactions, immunoassays, DNA denaturation, ELISA, melting/boiling point determination, activation or incubation of cultures, protein denaturing, and other routine laboratory protocol

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, The system comes from current production. TECHNICAL DETAILS Screw diameter: 2 × 75.0 mm L/D ratio: 38 D Design: Co-rotating MACHINE DETAILS Control system manufacturer: Siemens Drive power: 180 kW EQUIPMENT 2 dosing units Water bath Granulator Prjdpfxoztw Ago Ahcea Vacuum degassing Segmented screws and cylinder

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, total height: 2,600 mm, total length: 1,940 mm, total width: 2,300 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, overall weight: 3,460 kg, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for convenient setup Psdpfszwl R Hex Ahcsra AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned, overhauled, and tested at our facility after receipt of your order. We would be happy to perform a customized test cut for you. You will receive a warranty of 6 months on all machine parts. We would also be happy to offer commissioning and training.

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Prodsg U Uv Uopfx Ahcea Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor, 95 kW - Volumetric K-Tron metering system - Degassing zone - Optionally with die head - Control system Pjdpfjqy E Evox Ahcora Optionally with strand granulator, water bath, etc. Inspection possible by arrangement.

Condition: used, color: other, Dimensions (LxBxH): 650 x 350 x 165 cm High-pressure former dimensions LxWxH: 6500x3500x1650mm Water bath dimensions LxWxH: 3800x2250x950mm Prsdpezm Icqofx Ahcsa Bath depth: 180 mm Equipped with: Advantech control panel, Speck 150 bar high-pressure pump Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Custom modifications deviating from the standard model that were carried out for us: 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. Prsdpfx Ahjy Nmmiocoa If you have any questions or require more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets Pedjzvnk Hopfx Ahcera System already dismantled, packed and stored

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine approx.LxWxH: 0,73 x 0,56 x 0,22 m · Heavy, solid cast construction · Automatic gear lubrication via oil pump · Smooth running due to ground gearbox gears operating in an oil bath · High concentricity thanks to hardened and ground main spindle · Thread cutting device · Lockable main switch and motor protection switch · Optidrill B 40GSM additionally with automatic quill feed · Electric · 2 feed rates: 0.1 / 0.2 mm/rev Pjdpfjyli Sfjx Ahcora · Coolant system · Drilling depth stop · 18 speeds: 50 – 1,450 rpm · 9 selectable speeds via gearbox lever on the front of the drill head *

Condition: new, empty load weight: 9,550 kg, maximum load weight: 30,450 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Air suspension with raising and lowering functions, axle load scales, total loading platform length approx.: 9,100 mm, low bed approx.: 6,900 mm long, loaded loading height approx. 890 mm, 24 x lashing eyes, each 10 t, 12 x stake pockets in the outer frame, run-up ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, adjustable side ramps, wooden floor 68 mm thick, toolbox with lid for lashing chains or tension straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle dipped bath hot-dip galvanized, , extra charge for:, hydraulic ramp shifting = Price: 1,000 ¤, , -- Printing errors, mistakes and changes reserved, sample pictures --, More data at: !, More Details: ! Prsdszvlxnspfx Ahcoa

Year of construction: 2017, condition: good (used), We are selling our etching system for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Exhaust Hood 90 L All components were purchased new in 2017. The STOMA ECOLINE etching machines are largely constructed from V2A-grade stainless steel. The machine enclosure is bolted. ECOLINE etching machines are equipped with a separate freestanding control panel for increased flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without factory-installed extraction or a fan. Pjdpfx Ahey H D Acscjra Standard configuration includes a connection for direct water cooling. Bath volume: 90L, Max. plate size: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - Suitable for magnesium and/or zinc - Maximum plate format: 50 x 65 cm - Bath volume approx. 90L - Mains voltage: 3 x 400V - Total space required: approx. 2 x 2.5 m STOMA Preparation Tank - Maximum plate format: 50 x 65 cm - Water connection: R ½" - Footprint: 200 x 95 cm - Drain pipe diameter: 50 mm STOMA Developing Machine 18L - Maximum plate format: 50 x 65 cm - Approx. 18 L

Condition: new, empty load weight: 820 kg, maximum load weight: 1,880 kg, overall weight: 2,700 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50R13C, 3-S tipper from trailer manufacturer HAPERT model COBALT HM-2 2700kg 305x180x100. Prsdpfxerx S Shj Ahcea In our opinion, Cobalt tippers from Hapert are extremely stable, very well equipped and also have a fair price. The high loader car trailer is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the tipper trailer at a glance. It has an extremely sturdy steel frame, hot-dip galvanized in an immersion bath, 70 cm aluminium dropside attachment, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium dropside walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000 kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for Hapert three-way tipping trailers. Here you will find a grid attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100km/h approval, tool box, lashing straps and lock.

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Predpfxezvflue Ahcoa All technical data for the individual systems can be found in the attached pictures.

Condition: used, Year of construction: 2009, Bi-Matic Dynamic 4.5.S.7 (year of manufacture 2009): Dimensions of processed material: Edge thickness: 0.4 – 3.0 mm (in coils), up to 5 mm (in strips). Part thickness (panels): 8 – 50 mm. Minimum part width: 60 mm. Minimum part length: 90 mm. Operating parameters: Working feed speed: 7 m/min (constant speed of the feed belt). Working air pressure: 6 bar. Adhesive heating time: approx. 5–6 minutes (Teflon bath). Predpfozvfdwsx Ahcja Automatic edge banding machine, application zone, pressing zone, single-motor edging on THK guides, tilting milling unit, radius cutter, brushes. The machine is still in operation. Available for immediate pickup.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm Predpfx Aezuyp Eohcja - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl max. workpiece weight between centres 4000 kg total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Original purchase price in 2019: EUR 1.550.000,- Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Prsdpfx Ahszuygdscsa Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Tool taper Capto C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. Predpfx Aszv Ttaohcoa 20 x LTA AC3001 R, production years 2004-2011.

Condition: used, Year of construction: 2002, Travel ranges: X 350 mm Y 220 mm Z 220 mm Automatic rethreading Coolant bath without cooler Prodpfezumk Nox Ahcoa

Condition: excellent (used), Huber CC-520w vpc cooling/heating bath and recirculating thermostat Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: CC 520 Type: CC-520w vpc Controller: Compatible Control CC2 Temperature range: -55 to +100 °C Power connection: 400 V / 3~ N / 50 Hz Offered is a used Huber CC-520w vpc cooling/heating bath and recirculating thermostat with water-cooled refrigeration unit and Compatible Control CC2 regulation. The unit features an integrated stainless steel temperature control bath and connections for external temperature control applications. It is suitable for laboratory, testing, and industrial temperature control processes, as well as for cooling and heating connected devices. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: CC 520 Type: CC-520w vpc Controller: Compatible Control CC2 Podpfx Ahjzukkmocora Temperature range: -55 to +100 °C Power connection: 400 V / 3~ N / 50 Hz Max. power consumption: 14.5 A Refrigerant: R507 Refrigerant quantity: 1.55 kg Max. pressure: 25 bar CFC & H-CFC free Operation via Compatible Control CC2 with display, SET/MENU buttons, and rotary encoder. Available interfaces/control connections: CAN, POKO ALARM, AIF REG+E-PROG, ECS STANDBY as well as RS232/RS485 SERIAL. Dimensions: Dimensions W × D × H: approx. 539 × 629 × 1102 mm Weight: approx. 161 kg Equipment: Compatible Control CC2 controller Integrated stainless steel temperature control bath with lid Water-cooled refrigeration unit Connections for external temperature control circuit Cooling water connections Movable stainless steel housing on castors Electronic interfaces and alarm/control connections Shipping information: Due to a device weight of approx. 161 kg, shipping by freight forwarder is planned. Dimensions of the device approx. 539 × 629 × 1102 mm. Condition: Used condition with noticeable signs of wear and tear due to age and use, dirt, scratches, and partial corrosion/rust marks. Scope of supply: 1 × Huber CC-520w vpc cooling/heating bath and recirculating thermostat with Compatible Control CC2. Scope of supply as shown in the pictures. The unit is available upon agreement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, overall weight: 3,300 kg, input voltage: 400 V, For sale is a well-maintained CNC wire erosion machine, Charmilles Robofil 440 SL (CT-Millennium control), manufactured in 2002. The machine was used regularly in our production process and has been serviced accordingly. It is being sold due to capacity reasons. Travel ranges: X=550, Y=350mm, Z=400mm Max. workpiece dimensions: 1200mm x 700mm x 400mm Taper cutting device: 30 degrees Wire spool capacity: 16/25 kg Pedpfezvw Ibjx Ahcjra Work tank door with viewing window Water bath machine Automatic wire threading Includes wire aligner.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 9,250 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 1,500 kg, input voltage: 415 V, input frequency: 50 Hz, 2021 Complete Coating, Breading and Battering line, suitable for poultry, seafood, red meat, plant-based proteins, and cheese products. This system comprises of the following machinery: Manufacturer - Jinan Hiwell. Date of manufacture - 2021. 2 x DJJ100-II Batter Mixers mounted on mobile frame, and each fitted with a Flat Vane Pump. Mixing vessel capacity – 100 litres (per unit). 1 x SJJ600-IV Batter Coating machine with recirculating pump. While the products pass through the batter shower on the conveyer, the underside of the products are coated by the batter stored in the tank; the topside is enclosed with batter by the batter weir fall. 1 x SXJ600-IV Breading/Flouring Machine. This works as a continuous, automated system that applies an even, uniform layer of dry flour or breadcrumbs to food products. As products enter the machine, they ride on a wire-mesh conveyor belt that passes over a bed of flour or breadcrumbs, coating the underside of the food. Heavy-duty air blowers and vibrators remove loose, excess flour or crumbs from the coated products before they exit the machine. An integrated screw and circulation system continuously gathers, sifts, and recycles the unused flour or crumbs back into the hopper to maintain high material efficiency. Prsdpfx Ahezvrfbscja 1 x NJJ600-IV Tempura Battering Machine. This machine automatically applies thick or thin tempura batters to products through an immersive dipping process. As food moves along the line, it travels between an upper and lower mesh belt that completely submerge the product into a batter bath, ensuring 100% coverage. It is built specifically to handle the high viscosity characteristic of traditional tempura batters. You can easily adjust the gap between the upper and lower mesh belts to accommodate products of varying sizes and shapes. Output capacity – up to 800 kg/h (approx.), subject to the product, belt speed, coating pickup, and product spacing. Electrical requirements – all machines are rated to 415 V / 50 hz / 3 phase. Useable wire mesh conveyor belt width – 600mm wide. Total line/system footprint dimensions – 9.25m long x 1.2m wide x 2.2m high.

Condition: new, empty load weight: 680 kg, maximum load weight: 2,820 kg, overall weight: 3,500 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, tire size: 195/50R13C, Extremely robustly built and low-profile flatbed trailer with parabolic suspension from trailer manufacturer HAPERT, model AZURE H-2, 3500kg, 405x200. Thanks to its folding sideboards, the flatbed is extremely versatile in use. Pallets can be easily loaded from the sides or the rear. All drop sides and corner posts are removable, quickly converting the high-loader into a standard platform. Pedpfx Ahsq Nzwdscsra The standard equipment of the Hapert platform trailers is extensive, featuring sturdy aluminium sideboards, eccentric locks, 13" low-profile running gear, parabolic spring suspension, lashing eyes, net hooks on the lower hinge assemblies, automatic jockey wheel, extremely stable welded steel frame hot-dip galvanized in a dipping bath, as well as a reinforced and bolted V-drawbar. Additionally, we offer a wide range of accessories for Hapert car trailers. For a surcharge, you can choose higher sideboards, mesh extensions, additional sideboard extensions, front rack, loading ramps, rear props, 100 km/h type approval, toolbox, lashing straps, and trailer lock.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. Pedpfx Ahezvmy Hocora 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), Complete Deighton 200mm wide battering, breading and frying line. With wire belt infeed, Preduster, batter applicator wire type and breading machine with electric fryer. Capable of flash frying 180/200kg of product a hour Predpfxeu Uuawo Ahcja

Condition: excellent (used), Grunwald flexliner. 3-lane. For denesting trays and hot filling, with 3 x Smartdate X60 printers for film. Sealing 3 at a time. Exiting into single lane. Size of machine is approx. 8 m long x 1.7 m wide with external control panel 1.8 m x 350 mm. All s/s. With one set of tooling for round pot. Pjdpfoxphqaox Ahcsra