Used Electroplating Bath for sale (432)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale: MAFAC Elba as a 2-bath cleaning system, year 2019, with approx. 2,500 cleaning cycles in very good condition. (Sale exclusively within Austria) Equipment: - Rotating warm air impulse blower Bdsdpfewyc Siex Acnog - Stationary hot air drying system - Main stream fine filtration MT 1 - Main stream fine filtration MT 2 - Variable speed control of basket rotation - Control cabinet with top lighting - Leveling kit - Timer - Safety grid MW 20 - Chemical dosing proportional to fresh water (2 units) - Suitable for Euro-standard baskets: 600 L x 400 W x 288 H mm

Condition: new, Incl. parabolic suspension / spare wheel / full-width ramp / lockable coupling head / spiral cable Technical data: • Brand: Ifor Williams • Model: GX105 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: none • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 303 x 157 x 30 cm • External dimensions (LxWxH): 502 x 209 x 162 cm • Loading height (floor): 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 664 kg • Payload: 2,836 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 155/70R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced side panels, covered with tread plate and walkable • 24 mm anti-slip, waterproof phenolic plywood floor • Extremely robust, fully welded tubular steel frame • Frame fully hot-dip galvanised in immersion bath • 2 individual ramps (skids), standing on shaft, 120 cm high • Ultra-low chassis for minimal loading angle • Excavator bucket rest at the front • Spare wheel mounted under excavator bucket rest • 6 lashing rings mounted in the sideboard • 4 foldable lashing eyes (plate anchors) mounted in the floor • KNOTT leaf spring axles for maximum heavy-duty use • Automatic reverse mechanism • KNOTT overrun hitch and parking brake • Lockable coupling head • Very robust, bolted, reinforced V-drawbar • 13-pin plug • Removable plug cable from front wall • Reversing light • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in the rear frame • Heavy-duty centre support wheel Bdodpfx Asx S Ri Tjcneg Optional equipment – available on request: Various accessories can be retrofitted to this trailer as shown in the pictures, e.g.: - 4 foldable lashing eyes (plate anchors) mounted in the floor New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be shipped in advance or export plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been specialist dealers & repair workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Errors, mistakes, and prior sale excepted -

Condition: new, incl. ramp recess with ramps / closed loading platform with numerous lashing points / manual cable winch Technical Data: • Brand: Martz • Model: GT PLATEAU 400 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Unregistered • TÜV/HU (inspection): 2 years from first registration Bedpfx Asx S Rm Ejcnodg • Interior dimensions (LxWxH): 405 x 199 x 0 cm • Exterior dimensions (LxWxH): 555 x 203 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 565 kg • Payload: 2,135 kg • Chassis: Flatbed trailer (wheels under the platform) • Tyres: 195/55R10C • Suspension: KNOTT rubber suspension axles • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Anti-slip, waterproof phenolic plywood floor • incl. manual cable winch with brake • Ramp storage compartment under the loading platform • 2x steel loading ramps • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • 8x lashing rings recessed in the side frame (600daN/kg) • Side panels can be retrofitted at any time • Automatic reverse mechanism • KNOTT overrun brake and parking brake • Reinforced, very sturdy bolted V-drawbar • 13-pin connector • Reversing light • Large-dimension safety lighting • Integrated rear fog light • Tail lights recessed in the rear frame • Automatic jockey wheel mounted Retrofittable accessories – feel free to enquire: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel • Toolbox • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance, or export license plates (Germany) can be provided - Export plates incl. customs clearance available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available on site! We have been a specialist dealer and repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions, and prior sale -

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Bedpfjx Hdq Tox Acnjdg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: new, * IMMEDIATE AVAILABILITY * Including full aluminium floor / tiltable loading area / winch / wheel chock bar / spare wheel Technical Data: • Type: New vehicle • MOT: New/2 years • Availability: IMMEDIATELY! • Permissible total weight: 3,500 kg • Unladen weight: approx. 920 kg • Payload: approx. 2,580 kg • Internal dimensions: 550 x 208 x 0 cm (L x W x H) • Overall external dimensions: 722 x 215 x 100 cm (L x W x H) • Loading edge height: approx. 57 cm • Tyres: 195/50R13C steel rims • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: at extra cost • Includes vehicle registration documents Standard Equipment: • Aluminium floor – extremely robust • 1 moveable wheel chock bar • Very sturdy welded steel frame • Tilting loading bed operated by manual hydraulics + 2 lift cylinders • Frame fully hot-dip galvanized (immersion bath) • Numerous robust cross members for high point load capacity • Additional continuous longitudinal beams welded in • 14 lashing rings inside the loading area, rubber coated (750 kg each) • Reverse automatic system • ALKO overrun hitch and parking brake • ALKO coupling head • Extremely sturdy reinforced V-drawbar • 13-pin connector • Reversing lights • Large-scale safety lighting • LED rear lights • Integrated rear fog lamp • Swivel-mounted lighting • Centrally fitted automatic jockey wheel • Spare wheel mounted under loading area • Registration documents: COC papers Including special equipment: • Winch with winch bracket • Winch removable and moveable, length-adjustable Optional accessories available on request: • 100 km/h approval with shock absorbers • Anti-theft device • Tarpaulin structures • Fixed box body • Side walls • Additional wheel stoppers • Tool box • Additional lashing rings • Reversing lights • Lashing straps • And much more New vehicle with warranty and MOT. ————— - Financing or leasing possible - Nationwide delivery available - Vehicle documents can be sent in advance or export license plates (Germany) can be provided. Bdodpjygc Tljfx Acnjg - Export license plates incl. customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been specialist dealers and service workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. - Subject to errors, omissions, and prior sale -

Condition: new, Year of construction: 2023, Electric furnace MELTEC Typ ZC80/180F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 80/180 F ECO V2 Bjdpfxoy E Tyhj Acnjdg suitable for DAW 80F and W80Zn

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, machine/vehicle number: E6-0000252, working width: 860 mm, area performance: 6,830 m²/h, overall weight: 287 kg, warranty duration: 12 months, tank capacity: 150 l, water tank capacity: 160 l, battery voltage: 36 V, gradeability: 18 %, noise level: 73 dB, battery capacity: 150 Ah, brushing unit diameter: 430 mm, empty load weight: 287 kg, Equipment: CE marking, type plate available, For sale is a professional REM Power SMB 7000/1200, a powerful scrubber dryer designed for cleaning large indoor areas such as showrooms, warehouses, and production halls. This model offers a cleaning capacity of 6,830 m²/h, a cleaning width of 860 mm, a suction width of 1,200 mm, a 150-litre clean water tank, and a 170-litre dirty water tank. Machine dimensions are 158 × 86 × 126 cm and the weight is 287 kg. The SMB 7000/1200 is a dual-brush professional machine with battery-powered wheel drive, water filtration, a high-quality suction motor, a durable oil-bath gearbox, preset cleaning programs, automatic lifting and lowering of the squeegee and brushes, as well as a comfortable seat equipped with a safety switch. Brush and squeegee changes are quick and easy, requiring no tools. The model's order number is 400700012003. Bjdpfsy Drlmsx Acnsdg This is a demo unit with only 5 operating hours. Price includes batteries, charger, 2 brushes, and a complete water pickup squeegee set with blades. A 12-month warranty is provided. Technical highlights: 6,830 m²/h | 860 mm cleaning width | 1,200 mm suction width | 150 L clean water | 170 L dirty water | 287 kg | demo machine | 5 operating hours.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 840 mm, total length: 1,040 mm, total height: 900 mm, maximum load weight: 200 kg, heating capacity: 6 kW (8.16 HP), tank capacity: 275 l, warranty duration: 1 months, type of input current: three-phase, inner dimension height: 420 mm, inner dimension length: 700 mm, inner dimension width: 500 mm, compressed air connection: 7 bar, input voltage: 400 V, input frequency: 50 Hz, WJS MTS Tool Washing Machine - Features an automatic system for cleaning tools of resin and other residues. - The carrier plate holding multiple tools is moved up and down in the cleaning bath, ensuring that all surfaces, channels, and recesses are cleaned quickly and thoroughly. Bedpeym N Uijfx Acnjdg - Additionally, two ultrasonic modules are utilized to significantly reduce cleaning time. - The system operates quietly and is both user- and environmentally-friendly, as only water-soluble cleaning agents are used and the cleaning process takes place within a closed unit. - The system is fully automatic and requires no supervision, saving time and money while ensuring tools are cleaned perfectly and gently. The WJS MTS-U system can also clean machine parts and other materials. - Suitable for all alkaline and acidic agents, as well as solvent-based cleaners. Ex works price Delivery time: 10-12 weeks One machine available from stock, subject to prior sale.

Condition: new, Year of construction: 2026, Metalclean - P100 spray cleaning system in stainless steel 1-tank spray cleaning system with rotating basket. With oil separator, pneumatic system with diaphragm pump. - Basket diameter 970 mm - Usable internal height 540 mm - Basket load capacity 200 kg - Filling volume 210 L Includes accessories: Bdedpfx Acsir Aqdjnog - Direct drive - Level control - Lid locking - Chip/particle filter with bath cover plate Spray pressure = 5 bar Operating voltage = 3 x 400 V/N/PE 50 Hz Fume extraction

Condition: excellent (used), The Buchi R-200 Rotavapor with Buchi B-490 Heating Bath is capable of handling temperatures from 20°C to 180°C. Model B-490 4 liter oil or water heating Bath with a temperature range of 20 to 180C Bdodpfxsnk Ucds Acnjg Specifications: - Temperature range: 20°C to 180°C - Rotation speed: 0 to 220 RPM

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Bdjdpfxot Uzito Acnog ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Bsdpeq Ewgkjfx Acnsdg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m Bsdped Nl E Usfx Acnsdg distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, maximum load weight: 500 kg, Cleaning system, type W150 Basket diameter 1,500 mm Bdodpfsga Dqljx Acnsg Usable internal height 950 mm Basket load 500 kg Suitable for pre-treatment before painting and final cleaning with cleaning agent Complete stainless steel design including: - Stainless steel pump, frequency-controlled - Integration of conductivity probe into the PLC - Automatic level replenishment - Electric bath heating (indirect) - 2 tank system - Eco-rinsing - 3-dimensional pulse air blow-off - Bag filter system - PLC control, Siemens S7-300, with operating panel - Direct drive for the cleaning basket - Mist extraction - Level control - Chip/particle filter with bath cover plate - Pulse compressed air blow-off including soundproofing hood - Oil separator PPT 100 - Pump-out device/bottom cleaning with drain valve - 2 units of drive/transport system

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Bdedoftzgxopfx Acnjg Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, Rotary vane vacuum pump in oil bath specialy to work in high oxygen concentrations.. Available in stock. Completely new. 12 months warranty. Model: Marpa Vacuum MV 0300N Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,5 mbar abs. Bdsdpfx Aeftzqzscnog Motor power: 7,5 Kw Any clarification, do not hesitate to contact us.

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Bdjdpfjftzzgjx Acneg Final vacuum: 0,1 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, empty load weight: 400 kg, maximum load weight: 350 kg, overall weight: 750 kg, loading space length: 2,510 mm, loading space width: 1,320 mm, loading space height: 1,520 mm, loading space volume: 4.9 m³, color: white, construction height: 2,080 mm, working width: 1,760 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, drive-on flap, plywood superstructure 15 mm roof/walls, 6 lashing eyes, * IMMEDIATELY AVAILABLE * with drive-on flap, plywood superstructure 15 mm roof/walls, unbraked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 750 kg - Unladen weight: 400 kg - Payload: 350 kg - Interior dimensions: 251 x 132 x 152 cm (L x W x H) - Overall exterior dimensions: 375 x 176 x 208 cm (L x W x H) - Loading sill height: 50 cm - Tires: 145/80 R13 steel rim - Brake: no - Support wheel: yes - 100km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen-printed board 15mm - Walls: 15mm plywood, plastic-coated - Roof material: 15mm plywood, plastic-coated - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (400kg/daN) - Tailgate: No - Tailgate: Yes - Tailgate material: Plywood reinforced - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 120x147cm - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: no Additional charge - Overrun device & brake: no - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized in immersion bath - overrun device from ALKO - base plate 15 mm thick - side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - interior light mounted - single-wing door at the rear - galvanized espagnolette lock and hinges - lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - support wheel - plastic mudguards - 13-pin plug - reversing lights - large rear lights - rear lights - rear lights - rear lights - rear lights - rear lights - rear lights - rear lights. plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Special equipment included in the price: - White drive-over wall instead of rear door, with drive-over point Accessories can be retrofitted - please enquire: - Anti-theft device - Rear supports - 100km/H approval with wheel bumper - Side door - Motorcycle rocker panels - Motorcycle stand rails - Motorcycle lashing straps - Lashing straps - Additional lashing eyes - Slot-and-hole rails for tensioning straps & locking bars - Rod strip with rubber coating for tensioning straps & locking bars - Steel or aluminum locking bars - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Bdodpfx Aceu Htavoneg

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Weight: 20 kg Ultrasonic frequency: 38 kHz Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Bdjdpfohma S Rjx Acnog Total power consumption: 1,600 watts Sweep: yes

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic cleaning system, ultrasonic washing system including automatic pneumatic goods lift; max. load capacity: 250kg Usable dimensions: Platform: 1,300 x 600 mm, usable height: 400 mm Ultrasonic immersion transducer mounted as bottom sonics Power: 5,000 watts effective / 10,000 watts peak – Frequency: 25 kHz Including surface rinsing/oil separator for bath maintenance External system dimensions approx.: L 2,130 x W 1,170 x H 1,780 mm Control: Siemens Logo Electrical connected load: 17 kW Bdjdpfxeyiy Hho Acnsg

Condition: new, * IMMEDIATELY AVAILABLE * Including rack for transporting scaffolding / XXL storage box Technical data: • Brand: Martz • Model: SCAFF 480 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/roadworthiness: 2 years from first registration • Internal dimensions (LxWxH): 480 x 250 x 0 cm • External dimensions (LxWxH): 598 x 255 x 249 cm • Loading height (floor): 55 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 816 kg • Payload: 2,684 kg • Chassis: Low-loader (wheels alongside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Plastic mudguards with checker plate reinforcement • Convenient loading rack, ideal for transporting scaffolding parts • Large accessory box for secure storage of small scaffolding components • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • Maintenance-free KNOTT rubber suspension axles • Reverse automatic device • KNOTT overrunning brake and parking brake • Very robust, bolted and reinforced tubular drawbar • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Rear lane marker lights • Integrated rear fog lamp • Rear frame lighting recessed • Automatic jockey wheel Optional accessories (available on request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Additional storage boxes • Reversing spotlight • Lashing straps • And much more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be sent in advance, or transit plates (for Germany) can be provided. - Export licence plates including customs declaration available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg, Germany Over 1,200 trailers available from stock! Bedpfx Aex Tixpecnjdg We have been specialist dealers and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off Bdodpfxei Tu U Ue Acnsg with haul-off with winder and guiding device

Condition: used, Year of construction: 2002, Bottle washer, make Krones, type: Lavatec KESK 245/17-120, control range 4.000 - 11.000 bph, for bottles with max diam. 105mm, built 2002, single-end machine, 180 rows of 17 bottle pockets, removed label outfeed in bin, with pre-soak bath water + caustic, 1+2 caustic jetting, 1+2+3 water jetting hot+cold+fresh, for sale. Bjdpfx Acerxup Sonsdg

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Bsdpfxsxvxqdj Acnsdg Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: used, Year of construction: 2007, Cleaning machine, manufacturer GM Gera, model: Arcade GEK2.1RV1, for 4,000 bottles/hour, 9 bottles/row, for 0.5 l NRW bottle, cell pitch 95mm, with pre-diverter, caustic bath 1+2, hot water bath 1+2, cold and fresh water spraying. Contact us for further information. Bjdpfx Acexghnaonedg