Used Electro Cabinet for sale (4,864)

Condition: refurbished (used), Electronic clamp with electronic opening and closing. With electronic reading of longitudinal and transverse sections. Cgodeyf D Dvepfx Ac Njn

Condition: used, Year of construction: 2010, 1 x Tool Dispensing System K & S Toolserver Year of manufacture: approx. 2010 Capacity: up to 2864 boxes (smallest box) Cgsdpfx Aewktl Usc Non Installation dimensions: Width: 1009 x Depth: 2431 x Height: 2069 mm Weight: 750 kg Max. payload: 800 kg Max. load per box: 4 kg (see photo for further technical data) The device can be viewed directly in operation with power on.

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 600 kW, AEG Thyristor, AEG Thyro-A, 2A 400-495 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Cjdpfx Acsrby Uvj Negn Type: 120254; 3058 Year: 2012 Dimensions: 1800 x 515 x 2130 mm Weight: 400 kg Cabinet: 400 V; 3-phase; 50 Hz; 868 A; 600 kW Power transmission system and distribution AEG Thyro-A 2A 400-495 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 495 A Cooled Power regulator Load supervision on analog outputs

Condition: used, In this offer you purchase a used slitter rewinder ‘Neolt Electro Trim 150’ Object of sale: 1 x Neolt Electro Trim 150 with the following equipment: incl. underframe 150cm roll width possible electric from 2021 Condition: This offer is a used device, which may show signs of use Cgodpowln I Tjfx Ac Njn (minor scratches or yellowing). The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 1985, condition: repair required (used), Extraction machine for taps Cjdpei Huvhjfx Ac Negn -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Cjdpohvmkiofx Ac Nogn Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Neolt Electro Power Plus 145 Trimmer The device is fully functional and ready to use. Cgjdpfxjx N Dxpj Ac Nsn Description: Ideal for trimming drawings, photos, posters, etc. Rotary hardened steel blade Transparent plastic pressure plate for precise cutting Sturdy base for creating a professional workstation Cutting length: 145 cm

Condition: used, This listing is for a Nickel Electro Clifton Unstirred Thermostatic Bath. The unit is in full working condition and is ready for immediate release. The Nickel Electro Clifton Water Bath is a highly reliable and digital unstirred water bath designed for precise immersion of flasks, bottles, and racks in a stable temperature environment. Ideal for laboratories that require consistent heating for various applications, this water bath offers exceptional temperature control and user-friendly features. Key Features: Stable Temperature Environment: Provides a highly stable temperature range from 5°C to 99°C, making it suitable for various laboratory applications. Digital Temperature Control: Equipped with a digital LED display for easy monitoring and precise temperature adjustments via a push-button interface. High Accuracy: Achieves temperature accuracy of ±0.2°C, ensuring reliable results for sensitive experiments. Uniform Temperature Distribution: Features a temperature uniformity of ±0.1°C for consistent heating throughout the chamber. Cgsdpfoxx Aa Ijx Ac Nsn Durable Construction: Made from stainless steel, ensuring corrosion resistance and longevity even in demanding laboratory environments. Anti-Bacterial Finish: The painted surfaces are treated with an anti-bacterial finish, promoting a safer working environment. User-Friendly Indicators: Illuminated on/off switch and heater indication lamp provide clear visual feedback on operation status. Versatile Accessories: Optional lid or layer of polypropylene spheres can be added to reduce evaporation and minimize contamination during experiments. Specifications: Temperature Range: 5°C to 99°C Temperature Accuracy: ±0.2°C Temperature Resolution: 1°C Temperature Uniformity: ±0.1°C Chamber Material: Stainless Steel Display: Digital LED Controller Type: Push Button Certifications/Compliance: CE Approved Dimensions (D x W x H): 332 x 361 x 290 mm (model dependent) Weight: 7.6 kg (model dependent) Wattage: 1000 W (model dependent) Frequency: 50/60 Hz

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use Cgsdpjxhfr Eefx Ac Nsn A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: used, This listing is for a Nickel Electro Water bath Cgjdpfexzh Hrox Ac Nen

Condition: ready for operation (used), Electro Adda FC71FE-8/2 3~ motor with Bonifiglioli MVF 49/F angular gear (i=14) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 14 mm ,used, small traces of use, 100% functional Cgsdpfei D Hruox Ac Njn

Condition: ready for operation (used), Electro Adda FC80FECC-2 3~ motor with SCM gearbox (i=3.9:1) , serial no. according to photo , hole spacing of mounting holes: 140 mm, Ø hole for output shaft: 12 mm hexagonal ,used, normal signs of wear, 100% functional Codpfx Acsi D Hr Uo Nogn

Condition: ready for operation (used), Electro Adda CF C1 80MT frequency converter , serial no. according to photo ,used, normal signs of use, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cjdpfx Aji D Hrqoc Njgn

Condition: ready for operation (used), Electro Adda FV71FE-8/2 3~ motor with Bonifiglioli angular gear MVF 49/P (i=7) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 30 mm ,used, normal signs of wear, 100% functional Cedpfx Acji D Htco Njgn

Condition: good (used), Three-phase motor, electric motor -Power: 0.25 kW Csdpfx Aeb A Nf Hsc Nsgn -Speed: 890 rpm -Shaft: Ø 14 mm -Design: B5 -Protection class: IP 54 -Weight: 11 kg

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Cgedpjupx E Uofx Ac Njn

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Cgjdpfsupx E Iox Ac Non Good working condition. Please check out our other listings as well.

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm -Drawer heights: 260 mm -Weight: 216 kg Csdjb A Iukspfx Ac Negn

Condition: not inspected (used), functionality: unexamined, total length: 1,200 mm, total width: 770 mm, total height: 1,200 mm, overall weight: 400 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table diameter: 350 mm Table dimensions: 600 x 210 mm Number of T-slots: 4 Table dimensions: 600 x 200 mm Number of T-slots: 4 MACHINE DETAILS Dimensions (L x W x H): 1,200 x 770 x 1,200 mm Weight: 400 kg EQUIPMENT Collets Cedpsxqm Erofx Ac Nsgn Boring heads Various clamping devices Counter-holder Rotary table Milling tables All accessories suitable for DECKEL tool milling machines

Condition: not inspected (used), functionality: unexamined, total length: 1,370 mm, total width: 750 mm, total height: 1,100 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Cgodpfjxqm Duex Ac Non The machine is being auctioned off as part of a business liquidation. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! Included: Boring heads Boring tools Collets High-speed milling head Counterholder Additional clamping equipment The accessories are suitable for DECKEL tool milling machines. MACHINE DETAILS Dimensions (L x W x H): 1,370 x 750 x 1,100 mm Weight: 300 kg

Condition: used, functionality: fully functional, machine/vehicle number: 1270, Year of construction: 1999, DISINTEGRATOR FOR SPARK ERODING BROKEN DRILLS AND TAPS - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm - 2x collet Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No. 1270 Cgodpfxsxniv Us Ac Nen

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Csdpfxerbzyge Ac Njgn Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 350 A Cooled Power regulator Load supervision on analog outputs

Condition: like new (used), Chanber size: Csdpfxjd Sm Die Ac Njgn 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: excellent (used), Year of construction: 1996, FREQUENCY CONVERTER KVA 60 - VOLT 380/660 - 50/100 HZ - RPM 1450 - 6000 GOOD CONDITION Frequency converter, frequency inverter, drive converter, controller, variable speed drive Cgsdpfx Acewcqxco Non -Input: 380 V 50 Hz -Output: 380 V 100 Hz -Power: 60 KVA -

Condition: ready for operation (used), We sell Vacuum packaging machine, without pump . Pump can be sold extra. Bbag width 900 mm. Cgjdsw Hc Eijpfx Ac Non