Rotary vane vacuum pump

EDWARDS E2M30

Condition: used, This listing is for a Edwards E2M30 Rotary Vane Pump Fodjxzg Sgepfx Afnsft

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, total height: 1,350 mm, installation height: 130 mm, total length: 800 mm, total width: 950 mm, overall weight: 560 kg, power: 0.8 kW (1.09 HP), Swingbeam die-cutting machine, hydraulic, capacity 16 to, stroke 90 mm, throat 560 mm, table size 800x400 mm, motor 0,8 KW, dimension die 460x350 mm, dimension 800x900x1350 mm, weight ca. 550 kg Ffjdpfx Aju R Nx Nsfnjt

Condition: good (used), Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Ffedpfx Afednv D Ssnot Warranty: 12 months (image)

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, nominal power (apparent): 30 kVA, torque: 163 Nm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 48, tool length: 300 mm, tool diameter: 70 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Ffsdpfx Aouw Sq Usfnet Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material

Condition: good (used), Oil diffusion pump Ffodpfx Aednv A Ujfnjt Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 bar 87 psi Cooling water connection Pump: 1/2 ", internal thread Jets Hat vapor barrier: 3/8 ", internal thread Dimensions: see outline drawing Weight: 560 kg 1235 lbs

Condition: good (used), Year of construction: 1963, functionality: fully functional, machine/vehicle number: 24410, • Model: Heidelberg SBG Ffodpfxexzzyre Afnet • Type: 1-colour letterpress • Application: Paper processing / die-cutting and printing operations • Year of manufacture: 1963 • Format: 560 × 770 mm • Condition: Standard machine • Features: Robust classic letterpress machine, ideal for die-cutting, embossing, and specialised applications

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 Fjdpfx Aevx Nmfsfnjft The buyer must take care of the professional dismantling himself. Forklift is provided.

Year of construction: 2008, condition: excellent (used), Screw pump Manufacturer: Busch Type: Cobra DS 600 E Status: very good condition Fsdpfxed Rafbe Afnsft Delivery time: from stock

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 Fedpfxevpaa Rj Afnjft tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: Fodpfx Astr U Hlsfnoft → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg