Used Eisele Vms for sale (116)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, PRESSTA CYKLON D double-head automatic screwing machine with all accessories for sale. Pgjdsyziu Topfx Amkel Package deal: if purchased together with the WM740 welding line and SMC350 machining center, which are also listed in our ads, the price is EUR 180,000.

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw Pgodpsvdk A Eefx Amksl TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm Pgsdpfxey Nm Ere Amkjl - Operation via switches and 4 hand levers

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service Pgsdpfx Amoy Naz Tskel - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos Pjdpfxoqzmnue Amkegl

Year of construction: 2017, condition: excellent (used), functionality: fully functional, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive Pgjdpfx Amey Hriweksl ■ Operated via foot valve ■ Max. stroke length: 40 mm ■ 25 double strokes/min. ■ Max. installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table top height: 950 mm ■ Ram force: 90 kN at 10 bar

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Notching saw for cut-outs and bevel notching. The machine is equipped with two saw blades, each with a diameter of 500 mm. It features a pneumatic clamping device. The feed is hydropneumatic and is triggered via two-hand control. The material stop is swiveling, with locking points and a digital display. Notching height and angle are motorized and digitally indicated. Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Psdpfx Aoyzcpdsmkjgl

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P Podpfxol Skl Is Amkjgl EU shipping approx. €350

Condition: used, Year of construction: 1994, functionality: unexamined, machine/vehicle number: 171982, saw blade diameter: 350 mm, main saw diameter: 350 mm, We offer this used EISELE LMS 350 P cut-off saw, year of manufacture 1994. Manufacturer: EISELE Model: LMS 350 P Serial number: 171982 Year of manufacture: 1994 Podpfxjy D H Dwe Amkjgl Voltage: 380 V With double-button control and pneumatic clamps Equipped with a wood blade If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. Podpfx Asyyz Txemksgl The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN Pjdpfsyyz Ebox Amksgl - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: Pgjdpfsyyzxhex Amkel - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive Pgjdpoyyxxfofx Amkol • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Push-in length of the material pusher maximum 6,200 mm Psdpfx Aswx I Hvemkegl System is dismantled in our warehouse Further technical data on request

Year of construction: 1996, condition: used, Hydropneumatic operation Pgedpfxeyxpw Ne Amkjl Punching force: 50 kN Work hub: 35 mm Overhang: 110 mm Installation height: 140 mm

Year of construction: 2019, condition: excellent (used), functionality: not functional, Compact hydraulic C-frame punching machine with 160 kN punching force for precise applications on smaller profile cross-sections. The torsion-resistant frame design ensures accurate punching in aluminium, steel or plastic. Pgsdpfjy Agqnex Amkjl

Condition: excellent (used), Mitre saw in excellent condition Pedpfeyw Tg Eex Amkegl

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Pjdpfx Ameyz T A Uokegl Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm Pgsdpfoyz Tqrsx Amksl - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: Pgjdpfjyz S Trsx Amkol - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Pgsdpoywtqdefx Amkol Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm rotations of disk: 2000 rpm Pgodpfxsb N Eicj Amksl engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm Podpoh I Dvnsfx Amksgl cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Pgodpfx Aeyzghdsmkjl

Condition: used, Year of construction: 2001, Hydropneumatic operation Profile height: 210 mm under hold-down Podpjyu Rztefx Amkjgl Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Weight: approx. 400 kg