Used Steam turbines for sale (16)

Condition: new, Year of construction: 2009, • Specification: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW, Extractions: MP2: 22 bar, MP1: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar, Minimum load: No extractions, Only bleeds, Steam flow: 45 kg/s, Maximum load: Steam flow: 270 kg/s. • Generator: 250 MVA, Air to Water Cooled, 18 kV, 8019 A, 50 Hz, 3000 rpm • Condenser: Average: 17 ºC, Min: 15 ºC, Max: 25 ºC. See attachment for inventory list of all items included and packaging details • Storage Conditions: Delivered 2009 and unused, currently stored indoors and secured, Turbine & Generator completely sealed, silica gel is inserted in the Turbine & Generator and regularly replaced. Equipped with electronic monitoring sensors for humidity and temperature with criteria from Toshiba for storage. Gijlhjv Tfp Socdwxst Contact Matt Fraser on +61 448 648 700

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. Gelhowiv D Docdwxeit - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: excellent (used), Year of construction: 1965, Functionality: fully functional, pressure: 35 bar, temperature: 425 °C, overall weight: 40,000 kg, rotational speed (max.): 3,500 rpm, rated speed: 3,000 rpm, Steam turbine manufactured by ZAMECH Elbląg POLAND (currently ABB). Steam turbogenerator manufactured in 1964, good condition. The set includes all the equipment necessary for the operation of the generator. The pressure of steam supplied to the turbine is 35 bar, the temperature of steam is 425*C. The turbine has undergone a general overhaul, it has practically not worked since then. The set includes: Steam turbine generator oil tank filters pumps coolers valves fittings emergency steam water pump Golhcdwjwhv N Dexeit and much, much more, a full complete set I have the factory documentation provided by the manufacturer. All diagrams, instructions, start-up, knowledge necessary to start the turbine and a number of photographic documentation.

Condition: ready for operation (used), Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible. Gjlowf Nydehcdwxjit

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, Functionality: fully functional, machine/vehicle number: J00674, power: 738 kW (1,003.40 HP), temperature: 59 °C, A TURBODEN 10HR ORC system with the following key specifications is for sale: Year of construction: 2012 Operating hours (h): 25,000 Net electrical output (kW): 738 District heating output (kW): 4,549 District heating flow rate (m³/h): 115 Inlet temperature (°C): 59 Gjlhovrfpiocdwxsit Outlet temperature (°C): 93 Additional equipment supplied: - Thermal oil tank - Expansion tank - Pumps - Control cabinets - etc. The system was professionally decommissioned and preserved by Turboden.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 60,000 h, Steam turbine including gearbox and generator, hydraulic system, switchgear and various accessories Make: MAN Type: MARC 1 - CO2 Operating hours: 60,000 - general overhaul was carried out after 40,000 hours Golevf Na Eehcdwxeit

Condition: new, Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 8330006 A101, pressure: 35 bar, power: 2,284 kW (3,105.37 HP), rotational speed (max.): 1,800 rpm, rated speed: 1,500 rpm, type of cooling: water, Like New: Originally purchased for a waste incineration project but never installed or used. TECHNICAL DETAILS Temperature: 40 °C Type of cooling: water Speed Speed (min.): 1,500 rpm Speed (max.): 1,800 rpm Rated speed: 1,500 rpm Turbine data point A Rated power: 2,284 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 6 bar Regulated outlet temperature: 196 °C Flow rate inlet/outlet: 13.5 / 9.5 t/h Outlet pressure: 0.1 bar Outlet temperature: 46 °C Turbine data point B Rated power: 2,488 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 8.2 bar Regulated outlet temperature: 226 °C Flow rate inlet/outlet: 13.5 / 12.4 t/h Discharge pressure: 0.15 bar Discharge temperature: 55 °C Turbine data point C Rated power: 2,087 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 6 bar Regulated outlet temperature: 196 °C Flow rate inlet/outlet: 13.5 / 6 t/h Discharge pressure: 0.08 bar Discharge temperature: 42 °C Gearbox data Design power: 2704 W Rated speed LW / SW: 1500 / 8,304 rpm Transmission ratio LW/SW: 5.54 Center distance: 400 mm Max. inlet temperature: 60 °C Oil consumption: 70 l/mm Heat quantity dissipated: 33,694 kCal/h MACHINE DETAILS Overall height: 2,472 mm Overall length: 3,210 mm Overall width: 1,500 mm Total weight: 9,900 kg Electrical specifications Frequency: 50 Hz Type of input current: AC Gjlov Dvdzohcdwxoit Input voltage: 39 V Rated current: 3 A

Condition: good (used), Year of construction: 2018, operating hours: 27,240 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Golhcdwsva Ih Doxjit Year Built 2018; installed date 2020; starting for production Jan. 2021; working hours 27240H (just for reference); power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC surface cooler & extractor; Sulter Dalian condensate pump; Condition installed; the technical information available upon request

Condition: new, Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 8330006 A101, frequency: 50 Hz, type of input current: AC, temperature: 40 °C, input voltage: 39 V, overall weight: 9,900 kg, total height: 1,000 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,800 rpm, total length: 3,000 mm, total width: 1,500 mm, rated speed: 1,500 rpm, type of cooling: water, nominal current: 3 A, Steam turbine Type AR 3MW - New unused. Originally bought for a waste incinerator project but never installed or used. Gslhcdeu H Ri Uewxeit

Condition: ready for operation (used), An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible. Gielhcdewf Nxmswxet

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, pressure: 20 bar, power: 774.8 kW (1,053.43 HP), frequency: 50 Hz, temperature: 350 °C, input voltage: 300 V, rotational speed (min.): 1,500 rpm, rated speed: 1,500 rpm, Two steam turbines are for sale, the high-pressure and low-pressure turbines are connected together to a generator. These can also be operated individually. Gslhjvkcdbjcdwxoit

Condition: good (used), Year of construction: 2018, operating hours: 13,993 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Year Built 2018; installed date 2020; starting for production Oct 2020; production stop Jul 2022; working hours 13993H; Gijlhcjva Ifvodwxet power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC extractor, Sulter Dalian Condensate Pump; Condition dismantled by OEM; the technical information available on request

Condition: ready for operation (used), Year of construction: 2008, Speed: 892rpm, current consumption: 660A, Cos: 0.83, power: 355kW, insulation class: F, operating mode: continuous operation. On-site inspection is possible. Gjlhcov R Exzodwxoit

Condition: ready for operation (used), Year of construction: 2016, A total of 6 motors and a vacuum pump are available. 1) Servomotor Siemens 1FK 7043-4CH71. 2) Servomotor Siemens 1FK 7064-4CF71. 3-5) 3x servomotor Siemens 1FK 7042-2AF71. 6) Servomotor Siemens 1FK 7060-2AF71. 7) Vacuum pump Gardner Denver G-BH1 2BH1490-7AH16. On-site inspection is possible. Goljv Ay Rijhcdwxeit

Condition: ready for operation (used), There are 26 motors available. Giolhceikrb Iodwxst

Condition: ready for operation (used), Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible. Gielhcjvtqtijdwxjt