Used Edgebander Machine for sale (65,734)

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Fgjdpfx Akjzux T Ao Ueg Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Edge banding machine Fsdpfozux Tvex Ak Uegg Manufacturer: Biesse Type: Jade 340 Year of manufacture: 2018 Technical data - Workpiece thickness: 10 - 60 mm - Edge height: 14 - 64 mm - Edge thickness: 0.4 - 8 mm - Feed rate: 12 m/min Biesse HD touchscreen control unit Units - Pre-milling unit - Glue application unit - Additional interchangeable glue pot - Trimming unit - Corner rounding unit - Flush trimming blade and profile trimming blade - Polishing unit - Release agent spray unit Operating hours as of May 14, 2026: 4832 hours.

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data Fgsdpfxszux R Io Ak Ueg - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: ready for operation (used), Year of construction: 2009, Board thickness 60 mm Edge thickness 3 mm Feed advance 25 m/min Sound-proof cabin Yes Glue tank Yes ----- Weight 3300 kg Hours worked Hours under power State good At local norms ----- Status in production Description We are putting our IDM edgebander up for sale as a replacement following the expansion of our production workshops. Here are the technical specifications: Model P-RT4 (productivity) Machine dimensions: 8656 x 900mm 1600mm wide roller table Crawler feed speed: 12-25 m/min Minimum panel size (length x width): 220 x 60mm Panel thickness: 10 to 60 mm Edge thickness from 0.3 to 3 mm Top, bottom, front, rear shape copying, end trimming on independent motors Profiled and flat scraping unit Integrated router shaft for optional panel grooving Edge and panel cleaning system with brushes Safety devices on all covers + environment (machine complies with standards) Fsdpfx Aeuftubok Usgg Electronic and mechanical adjustment of all aggregates Automatic part detection and aggregate positioning Granular gluing system with glue tray Integrated edge-roller tray Panel and edge preheating lamps Electronic positioning of pressure rollers Weight: 3300 kg

Condition: excellent (used), Manufacturer: Hebrock Type: EURO 2000 Year of manufacture: 2001 Radius and chamfer pneumatically adjustable. Power: 7 kW Workpiece thickness: approx. 10 – 50 mm Edge thickness: approx. 0.5 – 3 mm Minimum workpiece length: approx. 250 mm Fsdpfozvvtcsx Ak Ujgg Minimum workpiece width: approx. 70 mm In very good condition.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters for straight edges for angled edges Fgodpszvmygefx Ak Usg particularly suitable for edge banding of shaped parts READY FOR OPERATION

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 23 m/min, total height: 1,500 mm, total length: 3,200 mm, total width: 1,200 mm, overall weight: 1,200 kg, We offer this edge banding machine for shaped components, VITAP ECLIPSE 2.0, in very good condition, manufactured in 2021. Rated voltage: 400 V Frequency: 50 Hz Rated power: 9 kW Air pressure: 6 bar Weight: 1200 kg Dimensions (L × W × H): 3200 × 1200 × 1500 mm Thickness of workpieces: 8–60 mm Feed rate: 9–23 m/min Glue tank capacity: 9 kg Edge banding machine VITAP ECLIPSE 2.0 Device type: FD 21 pro Device number: 120019 P Year of manufacture: 2021 Used device, in very good technical condition, used for one project, used sporadically for over a year, hence the decision to sell. We are interested in selling or exchanging it for a panel saw with a cutting width of 4300 mm (with a price adjustment, of course). Due to the project closure, we are offering for sale: Multi-spindle drilling machine FELDER FD 21 Panel saw HOLZMA OPTIMAT HPP 350 Edge banding machine VITAP ECLIPSE 2.0 The device is connected, fully functional, and can be viewed/tested on-site – Kraków, Rybitwy. Fgsdpfx Akezuwdgs Uog The device is designed for edge banding narrow side surfaces of furniture components made of particleboard, plywood, and lumber. The VITAP edge banding machine is ideally suited for edge banding from 1-3 mm. Type: Edge banding - Single-sided edge banding machine Component thickness: 3 mm Edge thickness: 60 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Fgodpfx Asyyya Dsk Ueg Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, NEXUS: Trusted by Professionals Proven Performance in Contour Edge Banding A proven contour edge banding machine designed for easy operation by users of all experience levels. Continuously improved through real customer feedback, NEXUS incorporates innovative features that significantly increase the speed and efficiency of your production process. Fgjdpezphlwofx Ak Ujg Key innovations include a 3D laser scanning system that accurately copies the panel contour and measures the required edge band length with millimetric precision, a chassis-integrated edge band roll feeding table, and convenient automatic or manual operating modes selected through the touchscreen control panel.

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW Fodpfx Akoymyp Re Ujgg - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Fgsdpfx Asb Tuq Aok Usg -Quantity: 1x unit available -Dimensions: 400/180/H500 mm -Weight: 32 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NB875A is a professional 2-in-1 edge banding solution that combines straight edge banding and Soft Forming technology in a single machine – perfect for handleless doors and modern furniture fronts. Equipped with a complete set of pre-milling, heating, pressing, and finishing units, NB875A delivers flexibility, high productivity, and premium edge quality. Its fully automated control system and intuitive software allow fast switching between 14 different profiles (full C, left/right J, concave center, concave left/right, W-shaped, diamond profiles, etc.). Key Highlights Multi-functional machine for both straight and softforming edge banding in one pass. 14 profiles available, automatically switchable via servo control. Energy-saving function – automatic standby mode after idle time. Advanced industrial control PC with 24” touchscreen, online connectivity, optional barcode reader. Fully enclosed machine with sound-absorbing material for low-noise operation. CE certified, international brand electrical components. Working Units & Equipment Fodpexcwrmefx Ak Uogg Pre-milling unit with 2 electro-pneumatic motors, H35 mm cutters. 2 sets of J & C profile milling units (4 motors – 7.5 kW + 3.5 kW) with automatic switching. Panel pre-heating + 2 glue application units (panel + edge). Softforming & pressing station with precision steel rollers and band pre-heating system. Servo-driven tape feed & pneumatic end trimming (Ø180×3.5×60T saws, 12,000 rpm). Rough & fine trimming units, radius scraping & flat scraping. Double buffing units for a perfect glossy finish. Independent dust extraction hoods (9 × Ø125 mm) for all processing units. Automatic lubrication system and full safety protection (panel thickness detection, feed monitoring, E-STOP). Technical Specifications Minimum panel size: 300 × 150 mm (central concave ≥ 400 mm) Panel thickness: 18 mm (straight), 18–25 mm (softforming) Edge band thickness: 0.5–0.6 mm (softforming), 0.5–1.2 mm (straight) Feed speed: 8 m/min Power supply: 380V / 50Hz Air pressure: 0.7 MPa Installed power: 68 kW Net weight: approx. 6,000 kg Machine dimensions: 11,015 × 1,000 × 1,940 mm Applications Production of handleless doors for kitchens, wardrobes, and bathroom furniture Complex edge banding operations in medium and large-scale production Premium edge finish with invisible glue line Advantages for Manufacturers Maximum versatility: one machine for all straight & softforming edge banding profiles. Superior finish: smooth edges, perfect glue adhesion. High efficiency: automatic operation, quick profile changeover. Cost reduction: fewer machines required, minimal downtime.

Condition: good (used), Year of construction: 2014, Description: see machine photos. Fedpfx Ajy Tm Nfok Uogg

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Fgedpfx Ajynhwfek Ueg Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Year of construction: 2016, condition: good (used), For inquiries: Zoltán Utasi +36 30 205 7380 • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Fgedpewkf Twjfx Ak Usg Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: new, Year of construction: 2026, min. / max. veneer thickness 0.4 - 3 mm min. / max. veneer height 12 - 47 mm (optional: veneering up to 60 mm) min. / max. material height 10 - 45 mm min. material width 100 mm min. material length 100 mm material pre-milling 2 motors with power (diamond cutter) 2.2 kW feed motor power 2.2 kW panel desk at eye level : chain feed : loading plate for PVC and ABS edges : mechanical pressure zone driven by the main pressure roller and a series of pressure rollers to minimize the glue layer : central pressure setting : container for glue granulate : glue application to the material using a glue roller : electronic temperature control, working temperature 180 - 200 °C pneumatic tape cutting guillotine : control lamp for element spacing : double trimming saw for cutting off front and rear excess material : precise linear guides : trimming in motion for high cutting precision : veneering speed 9.5 m / min flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm. scraper unit: polishing unit top / bottom 2 x 0.18 kW, 50 Hz, 2,800 rpm. height and tilt adjustment: Fgedpfx Akov Dutbo Uog extraction connector 3 x fi 120 mm, 1 x fi 100 mm, roller table extension 250 mm: noise-reducing housing with a window to view the units: trimming unit 0.44 kW glue roller unit 0.55 kW glue tank heater 2.2 kW compressed air connection 6.5 bar total power consumption 9 kW / 400 V dimensions L. 3590, W. 1220, W. 1686 mm weight 1100 kg • Pre-milling with counter-milling cutters placed on heads ensuring the highest quality of processing. • Front and rear cutting with a double saw. Upper and lower milling on a separate cutter. • Radial or flat scraper (to choose from). -polishing unit • Equipped with a control computer with an LCD display. • Very simple operation with switching on/off individual units with a single button. • In a word, an ergonomic and precise machine at a very favorable price offer, unmatched on the global market. • Standard function of a replaceable glue tank.

Condition: new, Year of construction: 2026, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Milling: two motors Radial scraper Flat scraper (glue) Fjdpfx Aksv Dt Sps Ujgg Spray system Polishing Interior lighting Automatic lubrication

Condition: new, Year of construction: 2026, Workpiece height 8-45 mm (optional: veneering up to 60 mm) Minimum workpiece length 100 mm Minimum workpiece width 100 mm Edge thickness 0.4-3.0 mm Feed speed 9.5 m/min Cutting unit - engine power 1 x 0.27 kW Milling unit 2 x 0.35 kW Milling unit 12,000 rpm Corner finishing unit - minimum workpiece length 250 mm Corner finishing unit - minimum workpiece length 1 x 0.35 kW Corner finishing unit 12,000 rpm Pre-milling unit 1x 1.1;1 x 0.75 kW Pre-milling unit 12,000 rpm Edge cutting unit: Glue removal unit: Polishing unit - engine power 2x0.18 kW Polishing unit 2800 rpm Retractable support with rollers: Fsdpfxsv Duvvs Ak Uogg Diameters of exhaust ports fi 120 mm Compressed air pressure 6.5 bar Total power 6.7 kW Dimensions - L x W x H 4200x800x1500 mm Weight 1180 kg + 2000 euros for option with a PUR glue

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Fgodjzz Hg Repfx Ak Ujg Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Fgedpfx Aksw Tlz Eo Usg Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Condition: good (used), Year of construction: 2008, XYZ Compact Turn 52 CNC lathe with barfeeder Year: 2008 Technical details: Bar Capacity 52mm Chuck Size 150mm (6") Control Siemens 810D Shopmill Distance Between Centres 280mm Maximum Cutting Diameter 220mm Maximum Cutting Length 280mm Rapid Feedrates 20m/minute Spindle Motor Power 20Hp Spindle Nose A2-5 Spindle Speed 5000rpm Swing diameter 400mm Swing Over Carriage 400mm Tailstock Quill Diameter 60mm Tailstock Quill Stroke 90mm Tailstock Taper MT4 Tool Size 20 x 20mm Tooling Configuration VDI 30 Turret Positions 12 X axis Travel 185mm Z axis Travel 325mm Machine Dimensions 2531 x 1778 x 1720mm Machine Weight 2590kg Fsdpszg Intsfx Ak Usgg Accessories/options: - LNS servo barloader - Foot pedal for chuck operations - Parts catcher - Renishaw tool setter - Tailstock - VDI 30 tool holders - Swarf conveyor - Documentations Under power in our warehouse, possible to test it anytime!

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Fgjdpfx Aoiit Erek Uog Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Fgjdpfx Akozzzm Ej Uog Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: good (used), 1 x Capping Machine, with lid feed and outfeed table. Suitable Cap Types Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP Cap Diameters 18 – 70mm (extended to 90mm) Bottle Height 30 – 300mm Power Supply: AC220V/110V 50-60HZ Working Speed: 20-60 /min (depending on bottle and cap size and shape) Fgjdpfxezzxd Is Ak Ueg Working Air Pressure: 0.4-0.6MPa Dimensions: Approx 1930(L)x740(W) x1600mm(H) *Video available on request*

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Fedpfxozy Upko Ak Usgg Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.