Used Drying Tunnel for sale (2,795)

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Blodexhntlopfx Ab Tsr

Year of construction: 2004, operating hours: 24 h, condition: used, functionality: fully functional, Full wahing & drying line for Spinac, Arugula and other leaves vegetables, line inluded: -Turatti Blowing washer with jacuzzi effect for arugula, spinach, 1500x 4500 cm, huge capacity per hour 500-1500 kg/hour -spinner FMT Blsdpsrrvx Nofx Ab Tjr -transporters We also have metal detector for good monies

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6381/99, 2 connected kilns, timber volume, each 142m3 , total = 284 m3 concidering: - 50x100 boards, stacking factor 0.85 - each kiln 24 stacks 4.2x1.2x1.2m + 12 stacks 5.1x1.2x1.2m ; 1m free space in front and 1m behind the stacks, 0.15m between the stacks Bljdpfx Aewynnieb Tsr - inside dimensions of each kiln: width 15.2m (3 stacks), depth 7.3m (4 stacks), height 4.1m (3 stacks) - dimensions of loading door 15.2x4.1m , lifting-sliding type of 2 pcs. Inspection doors in rear walls. - loading system frontal forklift , 2 sliding trolleys for the loading door of lifting-sliding type Heating power 610,000 Kcal/h at 60'C inside temperature. Heating system: hot water, 90'C at inlet min, bi-metal pipes, stainless steel core with external aluminium fin, including the automatic valve for the hot water with intercept valves and stainless steel pipes till rear wall of dryers Rehumidification: cold water 3.5 bar, 150l/h. The spraying device by stainless steel pipe and changeable nozzles on brass. Number of fans each kiln, installed in long aluminium pipes (Nardi patent): 12 , reversible, 800mm, changed power motors 4.0/1.1kw, two speeds. Long pipes increase the air flow, reducing the pressure drop, saving energy. The horizontal aluminium baffles closing the free space over the stacks Number of vents each kiln: 8+8 cast aluminium vents Snow load 120 kg/m2, wind speed 100 km/h The electric switchboard cabinet per each kiln. Voltage: 400V , 50Hz . Type of control: LEONARDO 3000 (renewed in 2007) Each kiln has 12 wood moisture probes, 2 kiln temperature probes and 2 kiln relative moisture probes, 3 digital read outs of these values. Dismantling will be done by buyer. Seller provide a forklift if needed.

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 Blsdpfx Absu Afu Re Tsr - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear Blsdpoxgtqgefx Ab Tor

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) Bedpev D If Dsfx Ab Tjlr 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Year of construction: 2005, condition: not inspected (used), ROLLER COATER WITH ULTRAVIOLET DRYING ELMAG COMBI-VAL S3 OF OCCASION TECHNICAL FEATURES: - Folded and welded steel structure. - TOTAL LENGTH OF 5.800 MM Blodpfjhknc Nex Ab Tjr - Product applicator roller - Ultraviolet drying - Year 2005

Condition: new, Year of construction: 2024, 4 PIECES AVAILABLE AT SHORT NOTICE with 15 supports (support surface: piping rubber) dimensions: LxWxH 910 mm x 700 mm x 1850 mm shelf depth: 510 mm shelf width: min. 500 mm - max. approx. 2000 mm Distance clear width from the shelves: approx. 78 mm Load capacity. max.ca. 600 kg evenly distributed Bsdsgmht Sjpfx Ab Telr load capacity/rake: approx. 40 kg Weight: approx. 90 kg

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Spray Dryer: - Manufacturer: Niro Atomizer - Model: MSD Bodpfxexgg Hbo Ab Tjlr - Capacity: up to 1,900 kg/h water evaporation - Design: Three-stage dryer - Drying air volume: 45,000 kg/h Evaporators/High Concentrators: - Manufacturer: GEA/Laguilharre - Throughput: 12,500 l/h Including big bag and sack emptying station Evaporator (Pre-concentrator) - Make: GEA - Model: RM20 - Capacity (feed): 20,000 l/h - Operating principle: MVR and TVR (hybrid)

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Bledpfx Aoxgdrbob Ter

Condition: used, Year of construction: 2017, Country of manufacture - Italy Blsdpfxov Nkaue Ab Ter INSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 13.200 X 8.900 X 5.400 MM OUTSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 14.060 X 9.500 X 6.900 MM FAN MOTORS: 5,5 KW AT VARIABLE SPEED FAN MAXIMUM ELECTRIC POWER REQUIRED: 55 KW

Condition: used, Year of construction: 2010, functionality: fully functional, Well-maintained Octofrost IQF 7/2 LH tunnel freezer operating on ammonia (NH3). IQF stands for Individually Quick Freezing, specially designed for rapid freezing of small food items. This process helps to prevent ice crystal formation in the structure of products such as vegetables, berries, cheese, meat, and fish. The freezer is complete with infeed/outfeed, control panels, evaporators, and a Siemens Simatic panel control system. Of course, we can also supply other refrigeration technology, such as compressors and condensers. Please feel free to contact us for more information! Products are placed onto the infeed conveyor at a height of approximately 1560 mm. The products are then transported through the Octofrost via a vibratory belt. The belt features a drop section to separate products and remove excess external ice. The belt is approximately 8100 mm long and 850 mm wide. Once the product is frozen to the correct core temperature, it exits at a height of 1250 mm. The freezer has three inspection hatches for checking product quality while it is on the belt. The OctoFrost is equipped with two NH3 evaporators, ensuring products are frozen to the desired core temperature of -18°C. There are 7 centrifugal fans, each directly driven by an ABB M3AA 132 MB electric motor, specified as: 50 Hz - 11 kW - 1450 rpm - 630 mm diameter. These fans blow air from below through holes in the belt, preventing products from freezing onto the belt. The side panel is extendable for easy inspection and cleaning of the evaporators and fans as needed. Additionally, the Octofrost comes with the corresponding control cabinet, which features 7 ABB frequency inverters for the conveyors, 3 Key Technology MFS 268 XL frequency inverters for belt vibration, and a Siemens panel for freezer controls. The IQF tunnel freezer has the following dimensions: 8100x3000x3250 mm (LxWxH) Effective belt length: 8100 mm Effective belt width: 850 mm Infeed height: 1560 mm Outfeed height: 1250 mm Tunnel freezer performance specifications: Product: Green peas Capacity: 3,600 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Product: Cauliflower Capacity: 2,520 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 25 to 40 mm Product: Tomatoes Capacity: 1,440 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Bledsxgcvxjpfx Ab Tjr Piece size: approx. 30 mm Product: Strawberries Capacity: 2,520 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 25 to 35 mm Product: Potatoes Capacity: 1,800 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: approx. 25 mm Product: Meat Capacity: 2,340 kg/h Infeed temperature: -3°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 20 mm cubes Do you want more information or have any questions? Feel free to contact us—we are happy to assist you! *Why choose HOS BV? We are not only the largest specialist in used refrigeration technology in Europe, but we only deliver after thorough testing and industrial cleaning. If desired, we can also handle your logistics.

Condition: ready for operation (used), Year of construction: 2022, total length: 1,800 mm, product height (max.): 400 mm, product width (max.): 120 mm, input voltage: 220 V, SHOWROOM machine, the machine advertised was never delivered and was only used for test purposes. In the pictures, the steam tunnel is switched on for test purposes. alpha-pack SST-1500 steam tunnel Bledpot A Ar Esfx Ab Tsr Technical details: -even steam distribution through low-pressure steam drum -height-adjustable steam steel pipes -adjustable steam output -can optionally be combined with conveyor belt and sleeve label machine Steam tunnels are particularly suitable for shrinking heat-shrinkable film sleeves on all types of products (glasses, PET bottles, glass bottles, cans and much more). Our steam tunnels are easy to use and the cost-effective alternative to conventional shrink tunnels that are based on electric heaters.

Condition: like new (used), FTNON Sanitiser tunnel Serial: 330188 Bodolpbgwepfx Ab Telr Stainless sanitiser tunnel, variable speed, forward / reverse, top mounted jets, side inspection door, conveyor dimensions 3500mm x 300mm, max tray 550mm W x 490mm H, 3Ph

Condition: excellent (used), Year of construction: 2008, input voltage: 400 V, Gas dryer for textiles after screen printing, M&R Sprint 2000. The dryer is in very good condition. Conveyor length: 7 m. Continuous adjustment of temperature and belt speed. Bedpfx Aboxfkyio Tolr

Condition: used, Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm Bedpfsxfivcjx Ab Tslr -Dimensions: 5400 x 1110 x 1250 mm -Condition: In very good condition, fans tested, under nitrogen pressure

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Blodpfsrl Ra Hox Ab Tor Length - 14 m Width - 3.6 m Drying capacity - 10t/h

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility Bjdjw Hf Adspfx Ab Tslr - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Year of construction: 2008, condition: used, functionality: fully functional, We are selling used tunnel carwash machine with soft brushes. max washing high 2,2 m Lenght of conveyor 17,2 m Bedpfx Aoxd Anpob Tolr

Condition: used, SAGA HFVD45-SA 4.5 m³ wood vacuum drying chamber 3 phase, 380V, 50Hz-40KVA OUTPUT POWER: 30 kW TANK DIMENSIONS: 5700 * 2150 * 2000 mm STACKING SIZE: 4500*1000*1000 mm Stacking capacity: 4.5 m³ INTERNAL DIAMETER: Φ1.7m Bodpfxow Ac Hfo Ab Tslr Manual feeding, automatic feeding with motor HYDRAULIC PRESSURE: 3 tons (2 units) VACUUM PRESSURE: -0.093 MPa. Motor Power: 7.5 kW

Condition: used, Spraying the full product with cold water to cool it down to approx. 40 °C. Allows clean labelling and creates a vacuum in the bottle. With cooling tower for recooling the spray water from the tunnel cooler with recirculation. Additional title: full product cooler, with splash water recooling Capacity of filling line: 5000 bo/h Blsdpfx Absw Tmpds Tsr Features: Cooling tower for spray water recooling with circulation (Richter Cooling Systems, 2015)

Year of construction: 2017, condition: used, Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm -Dimensions: 5400 x 1110 x 1250 mm Blodpfxsxd Ucxj Ab Ter -Condition: In very good condition, fans tested, under nitrogen pressure

Condition: used, Drying machine ROUSSELET Bedpfjxdnwvsx Ab Telr

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Bodpfxexcybke Ab Tjlr Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Blodpfsun R Ufjx Ab Tor Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!