Used Drying Tower for sale (2,983)

Condition: used, BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open-circuit cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are priorities. Technology Patented BACross III fill media system, which allows for easy inspection of the fill to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance access: A large, inward-swinging access door and internal maintenance platforms allow technicians to conveniently perform inspections while standing inside the unit. Hygiene control: The design minimizes standing water and protects against sunlight through special air inlet elements, reducing algae growth. Flexibility: The single-sided air intake allows the cooling tower to be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial cooling: Used in factories for process cooling. HVAC: Used in large building complexes as part of a central chiller system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity, as the actual performance depends entirely on the thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the warm water inlet temperature (e.g., 35 °C) and the cold water outlet temperature (e.g., 29 °C). Air volume flow: According to BAC's technical data, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three installed 11.0 kW fan motors. If this air volume is reduced by a frequency inverter (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of power the tower can provide. Technical Data: Fan and Air Data - Air volume flow: 60.0 m³/s (generated in suction operation) - Fan motors: 3x 11.0 kW (axial fans) - Technology: Integrated belt drive - Water flow: 198 l/s Hydraulic Connections - Water inlet: 1x DN 250 (nominal size ND 250 mm) - Water outlet: 1x DN 300 (nominal size ND 300 mm) - Make-up water connection: 1x DN 40 (ND 40 mm) - Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions and Weights - Operating weight: 11,446 kg (including water fill up to overflow) Fpjdpfsynkbmjx Ah Eep - Shipping weight: 5,350 kg (empty weight) - Heaviest single part: 3,114 kg (for installation)

Condition: used, Year of construction: 2017, We are offering for sale our modular sheet metal storage system, the BÖCKELT TOWER, which consists of a total of 98 cassettes. The system is designed for the organized storage of various sheet metal formats and can be inspected while powered up by appointment. Storage layout: Fpsdpfez D U Uxex Ah Ejp Small format (SF): 18 cassettes Medium format (MF): 18 cassettes plus 8 additional cassettes Large format (LF): 54 cassettes in three grids Total: 98 cassettes The system includes storage management software with an interface for connecting to an ERP system. Storage locations outside the tower can also be managed in the software. This storage system is suitable for sheet metal processing companies that want to manage their material stocks in an organized manner and store sheet metal of various formats in a space-saving way. Price: 59,000 € negotiable, net, ex works Leopoldshöhe. The exact scope of supply, software transfer, as well as disassembly and transport will be determined jointly before the contract is concluded. An inspection in the assembled state is possible by appointment.

Condition: ready for operation (used), Year of construction: 2007, A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible. Fpsdpfxszqu Hkj Ah Esp

Year of construction: 2016, condition: used, KOLBUS Transport and Drying Line year 2016 Overview: TS.L transport conveyor AMBAFLEX SPIRALVEYOR SV | KOLBUS XAF 661 cooling tower Fpsdo Ahgfgopfx Ah Ejp TS.L transport conveyor XBK 641 belt curve TS.L transport conveyor TS.L transport conveyor conveyor electrical cabinet Configuration: TS.L transport conveyor - length: 2,0 m - low friction belt, width: 0,35 m AMBAFLEX SPIRALVEYOR SV | KOLBUS XAF 661 cooling tower - length approx.: 31,5 m - 5,0 windings - transport direction: from bottom to top TS.L transport conveyor - length: 2,5 m - good grip belt, width: 0,35 m XBK 641 belt curve - 90° conveying angle to the right - good grip belt, width: 0,50 m TS.L transport conveyor - length: 1,5 m - low friction belt, width: 0,45 m - lateral guides TS.L transport conveyor - length: 5,0 m - low friction belt, width: 0,45 m conveyor electrical cabinet for single conveyor control Technical specifications: total length of transport and drying line: approx. 44,0 meters

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Fpjdpfx Ahsyffqqs Esp Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: refurbished (used), Year of construction: 2025, 2 × KC 1/65H Drying Chambers + Boiler House Complete industrial timber drying facility consisting of two KC 1/65H drying chambers and a steel-frame boiler house building designed to accommodate the heating equipment for the drying process. The boiler house structure has dimensions of approximately 9.3 × 10.6 m and is constructed from steel columns, truss roof girders and insulated sandwich panels. The sale includes: 2 × KC 1/65H timber drying chambers Capacity approx. 88 m³ of timber per chamber RSU control units Transfer mechanism Mechanical and electrical kiln equipment New kiln roofs Fsds Ah Sxuopfx Ah Ejpp Steel boiler house building with insulated sandwich panel cladding Supporting structural steelwork and roof construction The drying chambers operate with a hot-water heating system (90/80°C), feature five reversible fans per chamber, and are suitable for drying sawn timber, hardwoods and softwoods. Suitable for sawmills, timber processors and wood-product manufacturers looking for a complete industrial drying solution with its own boiler facility.

Condition: used, Year of construction: 2015, operating hours: 2,500 h, On behalf of our client, we are selling a fully equipped and ready-to-use top-slewing tower crane. * Siemens Simatic/Sinamics HMI touch system * Tagline Master (2.2 tons) * CE certified * Self-erecting * Enclosed operator cabin with elevator * Electric with generator (in container) * Radio remote control * Emergency descent * Hydraulic unit * Hydraulic lifting cylinder * Intermediate platforms * Base plates * Spare parts container * Tool container ----* Jib length: max. 68.5 m * Load capacity up to max. 125 tons * Top-slewing cages, each 7.8 m * Year of manufacture: 2015 * Operating hours: 2500 hours Fjdpfx Ahez D Ru Ij Eopp ----NACELLE: Diameter: ¢4800, Clearance: 3500 mm, Height: 4937 mm ----FORCES AT GROUND LEVEL * Base forces: 1670 m (1098 m mast) * In operation: Wind speed 15 m/s * Out of operation: Wind speed 40 m/s ----Moments and forces: M (kNm): 27850 (in operation), 26800 (out of operation) * N (kN): 6580 (in operation), 5130 (out of operation) * a (kN): 120 (in operation), 410 (out of operation) * T (kNm): 800 (in operation), 0 (out of operation) * Deflection, mast (m): 1.500 (in operation), 0.850 (out of operation) * Mast inclination (degrees): 1.100 (in operation), 0.500 (out of operation) * Corner load (kN): 3000 (in operation), 2500 (out of operation) ----Errors and prior sale excepted.

Condition: used, functionality: fully functional, Year of construction: 2014, LANG Eco Tower 60 with Eco Feed and extensive clamping system package for sale For sale is a LANG Technik automation system consisting of an Eco Tower 60 and an Eco Feed, manufactured in 2014. The system was used productively until recently and has already been professionally dismantled. Ideal for automating CNC machining centers and increasing machine uptime. Scope of delivery: 1 × LANG Eco Feed loading system, manufactured in 2014 1 × LANG Eco Tower 60 loading tower, manufactured in 2014 40 × LANG Eco-Grip vices, 77 mm, steel base 20 × LANG Eco-Grip vices, 77 mm, aluminum base 1 × Vice carriage 1 × LANG Quick-Point clamping tower 1 × Pneumatic interface between handling system and clamping tower 1 × Operating manual 1 × Installation manual Condition The system operated flawlessly in production until it was dismantled. An inspection is possible after prior arrangement. Transport Pick-up only Loading and transport must be arranged by the buyer. Terms of sale Sale exclusively to commercial businesses and entrepreneurs No sale to private individuals Sale subject to exclusion of liability for material defects No guarantee or warranty on condition Inspection possible after arrangement Price Fodpsz Nxdpefx Ah Ejpp Price is net plus applicable VAT VAT will be shown on the invoice. If you are interested, have any questions, or would like to arrange an inspection, please do not hesitate to contact us.

Condition: used, Year of construction: 2009, Liebherr Crane 160 HC-L 8/16 incl. remote control: 160 HC-L 8/16, height: 37.5 m, jib length 55 m, works number 30349039, year of manufacture: 2009 incl. the following crane parts: 1 cross-shaped undercarriage 2 base ballast A 7.5 t 12 base ballast B 4.8 t 1 jib 611, 10.7 m 1 jib 621, 8 m 2 jibs 622, 10.35 m 1 jib 631, 5.18 m 1 jib 641, tip 1 base tower, 12.42 m 5 tower sections, 4.14 m "Completely refurbished, sandblasted and newly painted! This crane has been completely overhauled and is in excellent condition. Old layers of paint and rust were thoroughly removed by sandblasting before a high-quality new paint coating was applied. Fodez Edttopfx Ah Eepp Subject to changes, errors and prior sale! You can find more vehicles on our website. Sales are exclusively subject to our general terms and conditions – see our homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal note: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, Year of construction: 1990, Equipment: ABS, all wheel drive, SPIERINGS Lattice Boom Tower Crane / Truck Crane Truck: ? Engine power: 222 kW / 305 hp / Displacement: 8,250 cm³ ? Vehicle dimensions: 12,395 x 2,600 x 4,000 mm ? Operating weight: 35,000 kg ? GVW: 36,000 kg including 7,080 kg ballast weight ? Tires: 445/65 R22.5 ? 3 axles ? 1st and 3rd axles steered ? All-round warning lights Crane: Fedpfxe Ahp Rbe Ah Eopp ? Max. outreach: 30.4 m ? Max. lifting capacity: 5,000 kg at 9.3 m outreach ? Drive type: hydraulic, hydraulic pumps electrically driven by external power or generator ? Control type: electrically actuated proportional and control valves ? Max. corner load: 204 kN ? V/max: 85 km/h ? Can only be moved by the undercarriage! Hoisting winch: ? Motor: hydraulic variable motor ? Drive group: 1Am ? Displacement: 20..55 cm³ ? Max. feed pressure: 260 bar ? Gearbox: planetary gearbox, i=27 ? Drum diameter: 375 mm ? Max. rope pull force: 25 kN ? Corresponding rope speed: 30 m/min ? Holding brake: spring-loaded disc brake Trolley: ? Motor: hydraulic constant motor ? Drive group: 1Am ? Displacement: 16 cm³ ? Max. feed pressure: 265 bar ? Gearbox: planetary gearbox, i=10.4 ? Drum diameter: 200 mm ? Max. rope pull force: 6 kN ? Max. speed: 50 m/min ? With limit switch ? Holding brake: spring-loaded disc brake Slewing unit: ? Motor: hydraulic constant motor ? Displacement: 16 cm³ ? Max. feed pressure: 300 bar ? Gearbox: planetary gearbox, i=160 ? Max. slewing speed of the upper carriage: 1.3 rpm ? Swing brake: hydraulic brake valve ? Holding brake: spring-loaded disc brake Boom luffing winch: ? Drive group: 1Em ? Motor: hydraulic constant motor ? Displacement: 16 cm³ ? Max. feed pressure: 220 bar ? Gearbox: planetary gearbox, i=92 ? Drum diameter: 200 mm ? Max. rope pull force: 38 kN ? Max. speed: 18 m/min ? Holding brake: spring-loaded disc brake ? With limit switch Load / Load moment limiter: ? Pressure switch on the hoisting winch motor ? Mechanical switch actuated by bending of the tower slewing frame Tower: ? Working height: 20.8 m ? Outer tower: length 9.9 m, inner tower: 11 m Boom: ? Jib boom in lattice structure, optionally horizontal or at a 30° incline ? 1st boom section: length 11 m / 2nd boom section: 11.1 m / 3rd boom section 7.8 m - German machine! - Ready for operation! Errors and prior sale excepted!

Condition: used, Year of construction: 2015, Moretto OTX 360VP_drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Fjde Af Na Hjpfx Ah Espp Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg

Condition: used, Year of construction: 2011, load capacity: 200 kg, empty load weight: 351 kg, fuel type: electric, Power Tower Nano PTN45. Year 2011. Working height 4.5 meters. Weight 351 kg. Platform capacity 200 kg. 12-volt battery with a 230-volt charger. Fpsdpjz H Aulofx Ah Esp Operational. Video, photos, and additional information also available via WhatsApp! Price net + 21% VAT, or net for export with VAT number. We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (NL) in as-is condition!

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times Fodpfjz I Dzijx Ah Ejpp - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Fedpeztzi Rsfx Ah Ejpp Technical data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 4 x Arbor Clamps 48155-125 The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. Fsdpfx Ahsz I Thrj Ejpp – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2003, operating hours: 12,000 h, functionality: fully functional, ASCO BP407 – Automatic Dry Ice Production Machine for Blocks, Slices, and Pellets For sale: a used ASCO BP407 automatic dry ice production machine. It produces dry ice blocks and slices in different thicknesses, as well as 3 mm and 16 mm dry ice pellets. The product formats are integrated into the machine and selected via the touchscreen, so manual die changes are not required when switching between formats. Machine details: - Manufacturer: ASCO - Model: BP407 - Year of manufacture: 2003 - Operating hours: 12,635 - Condition: Used, fully functional Fpsdoy R I Uqspfx Ah Esp - Products: Dry ice blocks, slices, and pellets - Pellet sizes: 3 mm and 16 mm - Stated maximum capacity: up to approximately 400 kg/h, depending on product format and settings - Reported production in use: approximately 250–300 kg/h - Operating hours since that service: 603 - Pump and cylinder have previously been replaced - Technical manuals, service reports, and maintenance history are available - Additional parts and spare parts are included The machine comes from a large industrial factory that replaced its production line and switched to another machine brand. The BP407 is now available for sale. Worldwide Shipping Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning. ASCO BP407, ASCO BP407 dry ice machine, ASCO dry ice production machine, automatic dry ice production machine, industrial dry ice machine, dry ice block machine, dry ice slice machine, dry ice pelletizer, dry ice pellet production machine, dry ice block and pellet machine, dry ice blocks and slices production, dry ice production equipment, dry ice manufacturing machine, CO2 dry ice production machine, carbon dioxide dry ice machine, 3 mm dry ice pellet machine, 16 mm dry ice pellet machine, used ASCO BP407, used dry ice production machine, second-hand dry ice machine, industrial dry ice production equipment.

Condition: used, Year of construction: 1989, operating hours: 3,917 h, Equipment: ABS, all wheel drive, MAKE: KOEHRING TEREX TYPE: LRT 110 YEAR: 1989 Fpedjzx Nqaopfx Ah Eop CE MARKED: YES OPERATING HOURS: 3917 HOURS TIRES/UNDERCARRIAGE: 40% POWER: 60KW ENGINE: CUMMINS 4BT WEIGHT: 10,400 KG OPTIONS: BOOM LENGTH: 10.9M MAXIMUM LIFTING CAPACITY: 7.5 TONS 4X4X4 4 OUTRIGGERS IN GOOD WORKING ORDER KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: like new (used), Year of construction: 2024, functionality: fully functional, KÄRCHER IB 10/8 L2P Advanced Professional dry ice blasting unit Previously used as an exhibition/demonstration unit, manufactured in 2024, 0 operating hours according to the meter, like-new overall condition with minimal storage marks, current list price €14,500, including narrow and wide blasting nozzles. This unit is sold as a used machine with no returns, warranty, or guarantee. - Net price: €8,319 // Gross price: €9,900 Fodpe Ai Eccsfx Ah Eepp - Inspection is welcome! - Shipping costs €150 throughout Germany, excluding islands.

Year of construction: 2014, operating hours: 40,000 h, condition: used, functionality: fully functional, belt width: 560 mm, number of shelf rows: 8, machine/vehicle number: B6, High-Capacity Industrial Ambient Spiral Cooling Conveyor Tower Heavy-duty 8*2 -tier ambient spiral cooling tower engineered for food production and industrial bakery applications. Built entirely with a high-grade stainless steel frame and structure, ideal for washdown environments and strict hygiene standards. Key Technical Specifications: Tier Count: 16 continuous spiral tiers / turns. Belt Width: 560 mm food-grade blue open-mesh modular belt for maximum air circulation and product stability. Drive System: Heavy-duty Brevini / Rossi industrial planetary gear drive motor assembly. Control System: Freestanding stainless steel electrical control cabinet featuring a Siemens SIMATIC HMI touch display panel, integrated VFD variable speed frequency drives, and emergency safety stops. Applications: Suitable for ambient cooling of baked goods, confectionery, wafers, packaged products, and snack items prior to packaging. Fpjdjz E A Rkjpfx Ah Eop Condition: Used, Dismantled ،fully functional, clean, and in very good working condition.

Condition: ready for operation (used), Marquart E-ZWO Shrink Fitting Machine, Pyrocooler Cooling Tower 3-25mm Ø Dimensions: approx. 600mm x 541mm x 357mm (L x W x H) 11kW 380 V Universal holder for HSK, SK, and BT tool holders. Fpsdpfxe Aifi Ts Ah Esp Induction coil: various sizes can be easily interchanged via a simple plug-in connection. Universal chuck: Clamps all tool holder sizes, no accessories required. You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2005, Equipment: CE marking, We are offering a used Merk VTGT-M1 vacuum drying system/heated process vessel, manufactured in 2005. Manufacturer: Merk Type: VTGT-M1 Year of manufacture: 2005 Volume of the product chamber: 0.84 m³ Permissible pressure of the product chamber: -1.0 bar Permissible temperature range of the product chamber: -20 to 100 °C Material of the product chamber: 1.4301 Permissible temperature range of the heating jacket: -20 to 100 °C Material of the heating jacket: 1.4301 Heating: electric, heating jacket Marking: CE, No. 05.107.41 Fpjdpfxj Ait Ewe Ah Ejp If you have any questions or require further images and information, please do not hesitate to contact us. An inspection can be arranged at any time.

Condition: used, Year of construction: 2018, machine/vehicle number: 505, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 11,700 mm, inner dimension width: 1,300 mm, inner dimension height: 2,350 mm, total length: 13,130 mm, total width: 2,840 mm, total height: 2,900 mm, overall weight: 6,600 kg, Equipment: CE marking, documentation/manual, We are selling our drying container, manufactured by Eberl Drying Systems. The system features an infeed device with wireless remote control. The stacking dimensions are height 2200 mm, width 1250 mm, and length 11600 mm. The system has wireless measuring points and is controlled via the Eberl drying program. The drying chamber is operated with hot water. Fjdpfx Asz Dtukeh Eopp

Year of construction: 2023, operating hours: 14,000 h, condition: like new (used), functionality: fully functional, COMPLETE DRY ICE PRODUCTION LINE - 2 x COLD JET P1500 DrDryice offers a complete equipment package for dry ice production, bagging, storage, and distribution. 2 x COLD JET P1500 PELLETIZERS Year: 2012. Output: up to 546 kg/h each, approximately 1.1 tonnes/h combined. Pellet sizes: 3 and 16 mm. Recorded operating hours: 15,765.1 h and 14,271.9 h. Automatic hydraulic production, touchscreen controls, and interchangeable extrusion dies. 2 x CHART FEROX CO2 TANKS VT 25/22, year 2013. Stated capacity: 25 tonnes each. Pressure rating: 22 bar. Vertical liquid CO2 storage. 2 x DRY ICE BAGGING MACHINES Year: 2023. Bags: 1-5 kg. Stated output: 500 kg/h each. Power supply: 380 V, 50 Hz. Fsdpfx Ahj Aib Uts Ejpp OLIVO INSULATED CONTAINERS 100 x BAC 600: 600 litres, approximately 450 kg dry ice. Approximately 235 x BAC 420: 420 litres, approximately 300 kg dry ice. Silicone seals, insulated lids, and drain plugs. Payload depends on pellet size and filling density. Complete package located in Poland. Price on request. Current readings, condition, and final scope to be confirmed. Dismantling, transport, and installation by separate agreement. SEARCH KEYWORDS Comparable brands are search references; the offered pelletizers are Cold Jet P1500. Cold Jet, ColdJet, Cold Jet P1500, P1500 pelletizer, P1500 pelletiser, Cold Jet P750, Cold Jet P3000, Cold Jet P325, Cold Jet dry ice production, used Cold Jet pelletizer, ASCO, ASCO CO2, ASCO dry ice pelletizer, ASCO pelletiser, ASCO dry ice plant, TOMCO, TOMCO2, TOMCO Systems, TOMCO pelletizer, TOMCO pelletiser, TOMCO dry ice production, Triventek, Triventek pelletizer, Triventek pelletiser, Triventek dry ice machine, IceTech, Ice Tech, IceTech pelletizer, IceTech pelletiser, dry ice pelletizer, dry ice pelletiser, dry ice pelletizers, dry ice pelletisers, dry ice pellet machine, dry ice pellet making machine, dry ice production machine, dry ice manufacturing equipment, industrial dry ice maker, hydraulic dry ice pelletizer, automatic dry ice pelletizer, high capacity dry ice machine, high density dry ice pellets, commercial dry ice production, continuous dry ice production, used dry ice machine, second-hand pelletizer, pre-owned dry ice equipment, dry ice pelletizer for sale, complete dry ice plant, dry ice production line for sale, dry ice factory equipment, dry ice manufacturing system, bulk dry ice production, 550 kg/h pelletizer, 1100 kg/h dry ice production, 1 tonne per hour dry ice plant, 3mm dry ice pellets, 16mm dry ice nuggets, blasting pellet production, solid CO2 production, carbon dioxide pelletizer, dry ice bagging machine, dry ice bagger, dry ice packaging machine, dry ice packing machine, dry ice dosing system, pellet bagging line, 1 kg dry ice bags, 5 kg dry ice bags, CHART FEROX, Chart Industries, VT25/22, liquid CO2 tank, LCO2 storage tank, 25 tonne CO2 tank, bulk CO2 storage, OLIVO BAC 420, OLIVO BAC420, OLIVO BAC 600, OLIVO BAC600, dry ice container, dry ice storage box, insulated dry ice container, dry ice transport container, 420 litre container, 600 litre container, dry ice distribution, industrial gas equipment, cold chain logistics, dry ice weighing machine, dry ice filling machine, dry ice weighing and bagging system, dry ice film bags, dry ice shipping box, reusable dry ice container, insulated pallet box, dry ice suppliers, dry ice wholesalers, industrial cleaning supplies, food cooling, refrigerated logistics, DrDryice.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, Binder VD 115 Vacuum Dryer ex-demo, like new. PRODUCT DESCRIPTION The BINDER VD series vacuum dryer ensures gentle drying and impresses with precise temperature control. BINDER’s patented expansion shelves ensure optimal heat transfer. The shelves can be positioned freely, and the interior is easy to clean. KEY FEATURES Temperature range: Fpsdpfsyahl Hsx Ah Eep Ambient temperature from +9°C to +220°C Controller with digital display for pressure and temperature Program-controlled drying monitoring with automatic ventilation at the end of the process Internal data recorder, measurement values available in an open format, readable via USB 1 aluminum expansion shelf, individually positionable Inert gas connection DN 16 port – for introducing external measuring instruments Safety glass window, spring-mounted, with splash protection Large viewing window, optionally with interior lighting Computer interface: Ethernet

Condition: excellent (used), Year of construction: 2021, operating hours: 69 h, KÄRCHER IB 7/40 Advanced Professional dry ice blasting machine Previously used as an exhibition/demonstration unit, manufactured in 2021, 69 operating hours according to the meter, very good overall condition, current list price €27,000. The sale is made as a used machine with the exclusion of returns, warranty, and guarantee. - Net price €11,680 // Gross price €13,900 Fsdpfj Ai Ecrex Ah Ejpp - Inspection is welcome! - Shipping costs €150 throughout Germany, excluding islands.