Used Drying Rack for sale (6,073)

Year of construction: 2022, condition: new, Shelves: 17 Clear distance between tubes: 60 mm Tube length for support: 650 mm Length: 200 - 2000 mm Steering rollers: Polyamide, 4 pieces Depth: 870 - 1180 mm Fgsdjd Ry I Nopfx Albeg Height: 198 mm Load capacity: 400 kg

Condition: new, Year of construction: 2025, Screen printing drying racks, present a few rust defects (can de cleaned by metallic brush) - So big discounts applied. New units : to assemble Prix : 800€ (1 unit) 750€ (2 units) 700€ (3 units) Fgjdpjxqx Tbefx Albog 650€ (5 units) 600€ (10 units) Transport not included, to be added The screen printing or flatbed printing drying rack, a space-saving and really useful piece of equipment for printing professionals. Designed to meet the needs of screen printing and offset printing workshops. Main features 50 grid drying racks, 70 cm x 100 cm. Dimensions movable screen drying rack: 70 cm x 100 cm, perfectly suited to a wide variety of flatbed printing media. 50 grids or layer for flatbed drying to dry a large volume of visuals. Outer size : 110 cm x 83 cm x 148 cm Robust drying trolley on wheels, offering optimum mobility and flexibility in your workshop.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts Fgedpozxnmysfx Albsg The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: good (used), Year of construction: 2017, Hobart CN-EA CDS Rack Type Dishwasher Water consumption: 240 l/h Capacity: up to 150 racks/hour Max. 2,700 plates/hour Prewash zone E, double rinse zone, electric tank heating, electric booster Electrically heated CDS straight drying area Digital °C thermometer, electronic control, separate tank filling, table limit switch Extractor hood with fan No factory-integrated dosing system for detergent and rinse aid Basket size: 50 x 50 cm Prewash table Curved discharge conveyor Hobart SD-H double-chamber water softener Fodpfxexqyxxj Albsgg 400 V 27.40 kW IP X4 Year of manufacture 2017 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). Fodpfx Aleyffqqjbegg In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: used, Year of construction: 2021, functionality: fully functional, Save on liquidity – leasing and hire purchase options available! You are bidding on a Hobart rack conveyor dishwasher, type CN series, in top condition, energy-efficient, with exhaust and wastewater heat recovery. This will result in significant long-term energy savings. The machine was first installed in June 2021 in a canteen and used for lunch service. Due to the closure of the business, operations were discontinued. The dishwasher was newly purchased by the operator and accordingly well-maintained, with all necessary servicing carried out. HOBART presents the new generation of the proven CN series as a powerful PROFESSIONAL version – the new rack conveyor dishwasher stands for greater efficiency and economy, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily challenges in commercial kitchens. Optimal washing results with low energy consumption – even with plastics. The CN rack conveyor dishwasher series has a modular design and operates in a left-to-right configuration, starting with pre-washing, main washing, rinsing, drying, and discharge via a conveyor belt. The disassembly was carried out by Hobart’s factory service department. Commissioning will also be carried out by the factory service department, with a contribution to costs, so that the warranty applies. This machine has a list price of approximately €58,000 net / €69,020 gross. You will receive an invoice with VAT shown. 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. A prerequisite for warranty claims is that the machine is installed and commissioned by an authorized Hobart service department. Technical data: External dimensions of the dishwasher: W: 4215 x D: 2336 x H: 2150 mm, dimensions see photo sketch Passage width: 510 mm Passage height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Model: CN-C-A-CDC Serial number: 866707054 Fjdpfx Ajzu Rwmslbjgg Year of manufacture: 2021 Subject to change and errors.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Features fan assist / air circulation (electric). Supplied with 15 x bakery racks. Located in Northern Ireland and ready to collect. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Date of manufacture - 1992 ✅ Rating 500-000 General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. Fgedpsxb Alvefx Albsg ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Fgjdpowxdqksfx Albsg Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: like new (used), Rotary 2 rack (racks for 18" x 30" trays) multi purpose oven / protein cooker. Previously used for cooking duck meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Fgodpfxomrqqte Albog

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Fsdpfx Ajx E Tmbjlbegg Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: ready for operation (used), Year of construction: 1995, A complete stationary concrete block production plant Adler is available. Components: stationary block machine/press unit, mixer, skip/feeding unit, material hopper, conveyor belts, height conveyor, pallet circulation system, pallet transport, palletizer, stacking and destacking units, strapping system, control system, hydraulic unit, silo, material feeding system, dosing unit, discharge. Output: 1500 cycles/day, output: 3000 pallets/h, operation: double-pallet operation, available concrete block format X/Y/Z: 500mm/200mm/250mm. The drying racks are made of wood and can no longer be used. The system has not been operated for 20 years and requires an overhaul. The system was operated from 1995 to 2005. Documentation available. An on-site inspection is possible. The system is located in Portugal. Fgsdjzh Ng Topfx Albjg

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons Fgodpfx Alezx Eftobog - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: good (used), Rotary 2 large rack (1m x 1m x 2m) multi purpose oven / protein cooker. Previously used for cooking poultry meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Fgjdpfjmrqqdex Albjg

Condition: not inspected (used), Year of construction: 2013, functionality: unexamined, working width: 330 mm, passage height: 120 mm, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying tunnel is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timbers, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Fodezhap Ejpfx Albogg Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Includes output conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Connection value approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm L x W x H Operator terminal approx. 1200 x 500 x 1100 mm L x W x H Additional output conveyor belt approx. 4000 x 600 mm L x W Total weight approx. 2200 kg

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Fgsdpfoh Tyrwex Albjg Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. Fgodpfx Alsyaiafjbog This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Year of construction: 2011, condition: excellent (used), We are offering a used SMC Carousel mini load system from the manufacturer SSI Schäfer for sale. Fodsixl Sqjpfx Albegg Technical specifications: High-performance modular shelving system for small goods (mini-load), 68 container racks with 12 levels per carousel Containers 600x400x310mm, weight 30kg (not included) 1040 transport units per hour Approx. 3,264 storage locations The entire system (mini-load, flow rack, sorting system) consists of 4 carousels Length per carousel approx. 15 m, height approx. 4.5 m Total area approx. 320 m2 Maximum travel speed 0.6 m/s Location of the machine: 89-600 Chojnice/Poland The machine has been disassembled, is stored in a dry place, and is ready for shipment. If you are interested, please contact us.

Condition: excellent (used), Year of construction: 1964, functionality: fully functional, Manufacturer: KNAPP-DONAU Model: UZFM Year of manufacture: 1964 Condition: used Price & Location Location: Rostock, Germany Milling length: 1800 mm Milling width: 260 mm Module - max.: 10 mm Table dimensions incl. coolant channel: 460 x 2100 mm Clamping surface: 250 x 1850 mm Maximum milling cutter width: 100 mm Infinitely variable feed of the milling carriage: 0 - 500 mm/min Rapid traverse: 3000 mm/min Swiveling milling head: +/- 30° Spindle speed range, 9 steps: 29 - 178 rpm Milling head tiltable on both sides for helical gearing: 30° Machine weight: approx. 3.5 t Space requirement: approx. 4 x 1.85 x 1.85 m Fsdpfx Aloytbraebogg Equipment/Accessories - 13 vices - Change gears - Clamping devices - Documentation

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Fjdezxzrpspfx Albjgg Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Fgodpfxszw Apge Albjg Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, This listing is for the Thermo Scientific A8150001 Gemini AS Heated Slide Stainer The unit is in full working condition and is ready for immediate use The Thermo Scientific Gemini AS Automated Slide Stainer (Model A81500001) is a high-performance staining system designed for histology and pathology laboratories requiring reliable and reproducible slide preparation. This automated staining instrument simplifies laboratory workflows by processing multiple slide racks simultaneously while maintaining consistent staining quality. The A81500001 model includes integrated heated stations, allowing slides to be dried efficiently during staining protocols. The Gemini AS supports a wide range of histological staining procedures and can be programmed for customised protocols, making it suitable for routine staining as well as specialised laboratory applications. Its high capacity and flexible configuration make it ideal for laboratories handling moderate to high sample volumes. With multiple reagent stations and automated timing control, the system reduces manual handling and ensures consistent staining results, improving overall laboratory productivity. Fgsdpfoyuylhsx Albsg Key Features Automated slide staining system for histology laboratories 5 heated stations for slide drying Capacity for up to 12 slide racks Each rack holds up to 20 slides Up to 26 reagent stations Programmable staining protocols Consistent and reproducible results Ideal for pathology, research, and clinical laboratories

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Fgjdpfx Aloy E Nyksbsg Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Year of construction: 2014, condition: not inspected (used), functionality: unexamined, This is a rack conveyor dishwashing machine from the premium manufacturer Meiko, model K-M 74 V8 N33 P8, built in 2014. No warranty can be provided that the rack conveyor dishwasher is complete or free of defects. The system was taken over from us after it was dismantled. This machine is likely only of interest to qualified Meiko technicians or experts in the field. Whether to reinstall or use for spare parts is up to the specialist to decide. Make us an offer – we need space! Fgjdpfx Asy Ibbfslbeg The M-iQ from MEIKO represents a milestone in warewashing technology: it combines top cleanliness, best efficiency, and optimal resource management in perfect balance. Four outstanding MEIKO innovations enable this unique cleaning progress: intelligent air management, advanced filtration, a convincing energy concept, and ideal operating comfort with the glass CC touch display. The machine is divided into infeed section, pre-sorting zone, main wash zone, final rinse zone, drying zone, and outfeed section. A VAT invoice will be issued. Technical Data: Machine type: K-M74 V8 N33 P8 Serial number: 10270806 Year of manufacture: 2014 External dimensions (W x D x H): 3950 x 995 x 2235 mm Dimensions outfeed roller table (W x D x H): 2100 x 680 x 850 mm Infeed table dimensions (W x D x H): 3290 x 630 x 850 mm Overall length of the dishwasher: 9340 mm Electrical connection: 400V 50Hz 3NPE 45.9 kW Cold water connection: 3/4"; demineralized Condition: used Further details: MiQ system diagnosis: certified hygiene safety; scheduled washing operation; guaranteed washing results Modular, bolt-together machine construction M-iQ Air Concept: highest energy efficiency; strict DIN compliance; no exhaust air connection required M-iQ self-cleaning: new batch principle; supported by M-iQ filter; reduced cleaning effort M-iQ energy concept: three-stage heating output; dynamic adaptation; optimal energy balance M-iQ wash dynamics: high pressure – reduced volume; optimized flow geometry M-iQ tank management: intelligent level control; efficient use of resources; outstanding economy M-iQ filter: revolutionary filter system; active soil discharge; highest process efficiency Shipping: Delivery or collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, need advice, or would like to inspect the unit onsite? We are available by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is exclusively according to our general terms and conditions (GTC).

Condition: like new (used), Year of construction: 2021, GENERAC WASH RACK MODULE D 6000 x 5700 cm Wash Area The GENERAC WASH RACK MODULE D 6000 x 5700 cm wash area is a customizable washing system, adaptable to various customer-specific configurations, including platform arrangement, maximum load capacity, wall and tank layout, as well as filter system positioning. This modular system comprises side walls (adjustable in number and length, height: 2.6 m) and ramps (number and placement selectable according to requirements) to ensure flexibility. The platform, made up of four units with removable grates for easy cleaning, provides a maximum load capacity of 15 tons. The main filtration system, with a capacity of 600 or 3000 liters, efficiently filters oil, hydrocarbons, and solids. Side tanks on each side and an optional Wash Rack Decanter (1000 liter volume, 1500 x 1500 x 2300 mm, dry weight: 400 kg) separate water from most of the sludge by settling; dosing pumps for flocculants are available upon request. The diaphragm pump (0.054 kW, 14 L/min) is activated by a water level sensor, while the booster pump (0.37 kW, 5–40 L/min) ensures flexible water flow. With a total wash bay size of 8200 x 6600 x 2850 mm, a platform of 6000 x 5700 mm (dry weight: 5600 kg), and a filter tank (600 L: 3000 x 700 x 1000 mm, 250 kg; 3000 L: 3450 x 1000 x 2120 mm, 625 kg), this wash station is ideal for demanding cleaning tasks. Manufactured by GENERAC, this system offers high quality and flexibility for industrial applications. - Customizable side walls (height: 2.6 m) and ramps according to requirements - Platform with 4 units and removable grates, load capacity: 15 tons - Main filtration system: 600 or 3000 liters for oil, hydrocarbons, solids - Side tanks: each side for flexible configuration - Diaphragm pump: 0.054 kW, 14 L/min, with water level sensor - Booster pump: 0.37 kW, 5–40 L/min - Total wash bay: 8200 x 6600 x 2850 mm, platform: 6000 x 5700 mm - Platform dry weight: 5600 kg - Filter tank (600 L): 3000 x 700 x 1000 mm, 250 kg - Filter tank (3000 L): 3450 x 1000 x 2120 mm, 625 kg - Optional: Wash Rack Decanter (1000 L, 1500 x 1500 x 2300 mm, 400 kg) - Product video available: GENERAC WASH RACK MODULE D on the GENERAC website - Areas of application: industrial cleaning, adaptable wash systems - Origin: Manufactured by GENERAC, leading manufacturer from Italy - Modular, robust, designed for custom cleaning requirements Technical Data GENERAC WASH RACK MODULE D 6000 x 5700 cm Wash Area Specification Value Diaphragm pump power 0.054 kW Diaphragm pump flow 14 L/min Booster pump power 0.37 kW Booster pump flow 5–40 L/min Wash bay dimensions (total) 8200 x 6600 x 2850 mm Wash bay dimensions (platform) 6000 x 5700 mm Wash bay dry weight 5600 kg Filter tank dimensions (600 L) 3000 x 700 x 1000 mm Filter tank dimensions (3000 L) 3450 x 1000 x 2120 mm Filter tank dry weight (600 L) 250 kg Fgjdpfx Ajydf Erjlbsg Filter tank dry weight (3000 L) 625 kg Decanter dimensions (optional) 1500 x 1500 x 2300 mm Decanter dry weight (optional) 400 kg Decanter capacity (optional) 1000 L Max. load capacity 15 tons Year of manufacture 2021 but new/unused

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Fjdpfjd I T Exox Albjgg Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!