Used Drying Tower for sale (2,312)

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Codod I T Exjpfx Ab Tjhf

Year of construction: 2005, condition: excellent (used), I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system 2-head UV-drying tunnel Cleaning unit with dust exhaust system Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Total width: 2,40m Weight: 4000kg Cjdpfx Ajiuc R Heb Tjhf Available immediately. Fully working.

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 32 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Cedpfoxpilxex Ab Tehf Terms of delivery: ex location

Condition: used, Year of construction: 2013, call (Contact · Telephone · Mobile · WhatsApp) * Crane Fassi F165 * 5 hydraulic extensions Chjdovflccepfx Ab Tsf * With remote control * Serial no.: 1606-0105 * Year of manufacture: 2013

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, power: 1.2 kW (1.63 HP), axle configuration: 2 axles, load capacity: 200 kg, lifting height: 2,500 mm, lifting power: 200 kg/m, platform length: 1,500 mm, platform width: 730 mm, overall weight: 500 kg, construction height: 1,590 mm, fuel type: electric, ground clearance: 70 mm, color: blue, Equipment: UVV, === MAIN SPECIFICATIONS === Year: 2019 Operating hours: n/a Working height: 4.5 m Platform height: 2.5 m Platform capacity: 200 kg Platform size (L × W): 1500 × 730 mm (with extension) Rotation: 0° (fixed mast) Drive at height: Yes Power: Electric / Battery (24V DC) Battery condition: Good Tyres: Solid / Non-marking Transport width: 750 mm Transport height (folded): 1590 mm Weight: 500 kg CE certification: Yes === HIGHLIGHTS === Fully self-propelled low-level lift with 4.5 m working height Lightweight design suitable for raised access floors (Kingspan Approved) Compact footprint of only 0.75 × 1.22 m Large 1.5 × 0.73 m platform with 0.5 m cantilever extension Automatic pothole protection and tilt alarm Easily transportable with 500 kg tail-lift vehicles === CONDITION === Machine in excellent working condition – fully tested, serviced and ready for use. Equipped with maintenance-free AGM batteries, automatic parking brake and emergency descent system. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price €6.250 (EXW / excluding VAT). The Power Tower Nano SP is the ultimate compact self-propelled low-level access platform, designed for quick, safe and efficient access at height. Its lightweight 500 kg design makes it ideal for indoor use and raised access floors. Fully CE-certified and ready for work – combining stability, ease of use and maximum safety in one compact solution. Cjdpjxcuabefx Ab Tshf === DELIVERY === Crane loading available on request for smooth dispatch. Flexible shipping options tailored to your destination and preferences. All logistics are handled professionally by the Collé Rental & Sales team.

Condition: good (used), Tiflex Screen Exposure Unit and Drying Cabinet / 1 Drawer – Ref. 23L6080 Compact unit for exposing and drying screens. This equipment is suitable for any screen printing screen up to 60 x 80 cm. Good condition Tested and checked, ready to use. TIFLEX BENCHTOP TESTING UNIT for exposing screens: For screens up to 60 x 80 cm 1 drying drawer Number of 40W fluorescent tubes: 8 Glass dimensions: 79.5 x 99.5 cm Overall dimensions: D x W x H: 87 x 133 x 54 cm Operating current: 12 A We deliver throughout Europe (shipping extra) Cjdpfx Abexryzps Tjhf

Condition: used, New: No VAT/margin: VAT qualifying Chjdpfoxrlbbex Ab Tef

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Cedst S Efgspfx Ab Tjhf Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Very good condition, available immediately.

Year of construction: 2025, condition: new, Drying container WISSMATEC Chodpfsxd Uznsx Ab Tjf Drying floor Hydraulic moving floor Year of manufacture 2025 Optional: - Discharge and dosing screw conveyor - Rotary valve - Hydraulic lid - Manual lid - Cyclone - Ventilation system

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 5-70523, total length: 156,000 mm, total width: 31,600 mm, year of last overhaul: 2025, input current: 64 A, conveyor belt width: 1,600 mm, height adjustment type: hydraulic, product height (max.): 4 mm, input frequency: 50 Hz, working width: 22,000 mm, The Svecia screen printing machine with UV curing is perfectly suited for medium to high print runs. It delivers excellent quality on a wide variety of materials, including plastics, glass, metal, and paper up to 4 mm thick. The machine has been electrically tested and is in perfect working order. See the test certificate in the image. The UV curing section features a new Thieme conveyor belt. All specifications and requirements can be found in the images. Csdpfx Abexrgluj Tehf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 53,000 h, machine/vehicle number: D0004B1198, actuation type: electric, controller manufacturer: TRUMPF, laser type: CO₂ laser, laser source manufacturer: TRUMPF Lasertechnik, laser source model: TruFlow 6000, laser hours: 10,520 h, laser power: 6,000 W, laser wavelength: 10,600 nm, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, CO2 Laser TRUMPF Type TruFlow 6000 6000 Watt Average Output Power Type: TruFlow 6000 Cedpfxjxrf Tdj Ab Tohf Year of Manufacture: 2008 Beam On: 10,520 h (current) Laser On: 52,981 h (current) Scope of delivery includes: • TruFlow 6000 base unit • Integrated alignment laser • Side beam output design (Y) • Diameter variation mirror • Integrated mirror telescope • Circular polarizer • Extraction mirror ventilation filter unit • Portable control panel • Analog input: Laser power control • Programmable power cycles • Digital (BCD) interface • Plate heat exchanger station • Cooling tower system • 20m portable control panel • Fine adjustment All information without guarantee. The laser was overhauled in 2024: • All gas coolers replaced • All resonator optics replaced The laser is being sold due to cessation of operations. The laser has been used in a combined cutting/welding operation on a 5-axis laser gantry in a low-dust industrial hall. It is therefore in good condition. The laser will remain in production until the end of 2025, so operating hours will continue to increase. The laser is still electrically connected and can be inspected in operation. Further details upon request or during on-site inspection. Viewing by appointment is possible. Location: Gotha/Thuringia, near A4 motorway, Germany Net price plus current VAT, without warranty and/or return, ex works, without packaging Disassembly, packaging and transport to be arranged by the buyer, support can be provided.

Year of construction: 1999, condition: used, Roller shutter belts for drying painted products (chairs or similar). Chedpfxexrd Nks Ab Tjf 3 ribbons, length 24.5 m, width 4 m 3 Ribbons length 27.5 m width 2.3 m.

Condition: used, Trolley 12 levels - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm Csdpfjwbtvuex Ab Tohf

Year of construction: 2001, condition: excellent (used), I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Chsdpoi Eup Ejfx Ab Tsf Year 2001 Working width 1400mm. Total length 4,00m Total power 74,3 kW Very good condition, available immediately.

Condition: used, Please contact ATS Norway for more information Chedpfxexatp As Ab Tef Please provide reference number upon request: 21271 Specifications: Extended feed bar, for 14 foot first rod, effective drilling length of 4.2 mp 1 rod. Hose reel construction for better hose handling Upgrading hydraulics for better capacity and energy efficiency Rod handling with 1 rod, drill length up to 7.5 meters New radio control New control system In-cab display for pressure adjustment and monitoring Directional instrument and meter counter HC25 hammer Rod shifter Ready for delivery   Description: We have a Montabert micro drill rn significantly upgraded w/ hc25 hammer and rod changer for sale. The tower has been significantly upgraded to function as it should. The feed beam has been extended to accommodate a 14 foot 1-rod. Which effectively makes the drilling length 4.2 mp 1-rod. Rod changer for 1 rod (12 feet) increases drilling length to 7.5 m. Compressor hydraulic valve can be included for an additional price. The tower is ready for delivery. Own weight: 1 Model: micro borretårn betydelig oppgradert m/ hc25 hammer og stangskifter

Condition: new, Year of construction: 2025, Screen Printing Drying Rack - 50 Grids, L x W = 70 cm x 100 cm. Outer size 110 cm x 83 cm x 148 cm. Codpfsxqx Tbjx Ab Tjhf Price : 1890€ - Delivery no included The screen printing or flatbed printing drying rack, a space-saving and really useful piece of equipment for printing professionals. Designed to meet the needs of screen printing and offset printing workshops. Main features 50 grid drying racks, 70 cm x 100 cm. Dimensions movable screen drying rack: 70 cm x 100 cm, perfectly suited to a wide variety of flatbed printing media. 50 grids or layer for flatbed drying to dry a large volume of visuals. Outer size : 110 cm x 83 cm x 148 cm Robust drying trolley on wheels, offering optimum mobility and flexibility in your workshop.

Year of construction: 2020, operating hours: 1,668 h, condition: used, New: No Field of application: Construction Make of engine: Hatz Serial number: ESF206420 Transport dimensions (LxWxH): 2.3x1.28x2.49 Please contact PFEIFER GROUP for more information Codeucrxajpfx Ab Tshf

Condition: new, Code: N0555 Brand: TOMAR Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Length of arms per side mm 780 Useful gap between arms mm 120 Chedpoui Rpxofx Ab Tef N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2840 mm Cjdpfx Ajxlvbxsb Tehf Measurements depth 9997 mm Measurements height 2285 mm Machine weight 12600 kg Control Unit Brand AMADA Model AMNCF This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), Year of construction: 2015, I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV Cedpjffk Etjfx Ab Tehf Model: Poliedra S.Cure 1650x2 + TT1 3500. Year 2015. Available immediately. Repairs needed: Display, Energy power units for each two UV-units

Condition: used, Year of construction: 2010, functionality: fully functional, Offer: 1 x Eco Tower 120 year of manufacture 2010 1 x handling system 1 x storage unit Cjdpfsxlciijx Ab Tjhf

Year of construction: 2023, operating hours: 1,495 h, condition: used, Type of fuel: Diesel New: No Field of application: Construction Make of engine: Kubota Serial number: ESF210292 Transport dimensions (LxWxH): 1.16x1.16x2.5 Cjdpfx Ajucrwieb Tshf Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2016, I sell the 2-head 2-lamp UV-drying tunnel Burkle UV2 1300 Year 2016 Working width 1300mm. Total length 2,80m Total power 36,6kW 2 Lamps GA 120 W + HG 120 W Codpot S D U Tsfx Ab Tehf Very good condition, available immediately.

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Working width 1300mm. Total length 2,00m Total power 18,7kW 1 Lamp GA 120 W Very good condition, available immediately. Chedovxa T Ajpfx Ab Tsf

Condition: excellent (used), Year of construction: 2011, I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500 Year 2011 Working width 1400mm. Total length 3,70m Total power 71,55 kW Very good condition, available immediately. Codot S Ehzopfx Ab Tohf