Used Frequency Dryer for sale (6,422)

Condition: used, Year of construction: 2002, machine/vehicle number: 910060/0001, conveyor dryer plant Factory consists of: Conveyor dryer: • Feed conveyor (2019) • Three horizontal chain driven conveyor levels made of 5 sections (2002); • 5 heat exchangers (2002); • 5 fans (each is 80kW) (2002); Iedjvt Rmvopfx Ah Noht • Cartridge filter for poisonous particles (2002), filters are cleaned; • Biomass separator (2019); • electronics; Fit to dry wood chips, corn biomass, hemp biomass. lucerne and similar. Manufactured in Germany

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. Ihjdsrp D Uxepfx Ah Njt MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: used, Year of construction: 2010, functionality: fully functional, Used Mark compressor with dryer. Used, in good working condition. Ready for pickup. Isdpfxjwprvie Ah Noht

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Iodpfx Aoq Igyvjh Nsht Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. Ihsdpfx Aoq Nfuzsh Njt 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Ihsdpfx Ahswx E Nbj Njt Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote.

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Ijdpfx Ahsxaxr No Nsht Complete with three filter set

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Iodpfod Sm Dijx Ah Noht Max temperature: 700 C °

Condition: used, Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs. Isdpfxoyanzzs Ah Neht

Condition: good (used), Year of construction: 2011, ERMONT Top Tower 3000 drum mixer for asphalt plant Iedpfxoxzvbdo Ah Noht Year: 2011 Capacity: 200 tons/hour

Condition: used, Used APV Anhydro model PSBD 58 stainless steel spray dryer. Unit rated approximately 50 kg/hour water evaporation rate (depending on product) at inlet/outlet temperatures of 600/140°C. Drying chamber approximately 1600 mm inside diameter x 1800 mm cylindrical height x 1500 mm conical height. Chamber has a safety rupture plate buti is not connected. Outside is insulated and claded by stainless steel plate. Inspection doors 450 x 550 mm. Unit includes (1) top mounted Anhydro nozzle co-current atomiser (could be used rotary atomiser but is not included). Unit includes 2 zones electrical air heater, Herding carbon steel filter, cyclone and ventilator. Electrical switchboard with integrated control panel is included. Has a ....PLC control system. Ihsdpsyany Rofx Ah Nst

Condition: used, Used Aeromatic model MP1 stainless steel fluid bed dryer. Stainless steel filter chamber approximately 16 litre capacity with a maximum product volume of 13.5 litre which is hinge mounted and removeable. Operating pressure is 6 bar. Driven by a 3.3kw 3/50 supply. Reportedly minimum batch weight 400g and maximum batch weight 6 kg. Ijdoyanu Iopfx Ah Neht

Condition: used, ALTO Encore L 2426 Shower suction machine / 24 VDC / 75A / IPX 3 / Weight 395 kg Ijdpfog Ngmxjx Ah Noht

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Ihodpfx Aowgi Sioh Njt Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Power: 0.81 kW Iedpfx Ahjxz Al Ns Noht

Year of construction: 2016, condition: excellent (used), PIOVAN Dryer DPA20 (2016) Drying capacity: from 0.5 to 25 kg/h. Process (air) airflow for DPA20: 5 ÷ 10 m³/h. Drying hopper volume for DPA20: 20 dm³ (20 litres). Temperature range: 40-150 °C. Dew point: standard down to -25 °C, with optional desiccant cartridge/tower down to -40 °C. Compressed air supply: oil-free, filtered air, pressure ~ 5-7 bar. Control features: airflow managed in 7 increments/levels, material database of Ihsdpfexyi Dcjx Ah Njt ~50 materials pre-loaded.

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes Iodpfevupdcox Ah Njht - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Absolutely as-new belt dryer, make New Eco Tec Woody 500-100-1.0 SP, year of manufacture 2019. System only operated for one year! Very well maintained, as-new condition. Immediately available. Suitable for drying sawdust and wood chips up to 1.5 t/h. Inlet moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium: hot air 90°C to 110°C. Immediate takeover possible! Iodsw Nrq Eepfx Ah Nsht

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The pictures show the machine in its unrefurbished condition. The offer price refers to a partially refurbished, fully functional machine. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Part height: approx. 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104 A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed rate adjustable: approx. 1.25 - 21.25 m/min - Length: approx. 3,500 mm - Width: approx. 2,700 mm - Height: approx. 1,600 mm Ihodpfjx Tpx Aex Ah Nst - Location: in stock - Voltage, Hz: 400 / 50

Year of construction: 2003, condition: excellent (used), EMC Mains filter Ihodegrhimspfx Ah Not Make Hitachi for frequency inverter Filter for FFFB - SJ300- 750/900 HF,L 300,100 HF further data,see picture 3 x 220 Ampere length 1000 mm width 300 mm height 190 mm

Condition: excellent (used), Frequency Inverter Make Omron Sysdrive Type 3 G 3XV-AB004-EV2 U:230 V 50/60 Hz Ihsdpfxjfuv Sze Ah Net Output 3 A 0,4 Kw,230 V

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST, Model: LIGNOCURE HL 140-4-N-DL Year: 1999 (1990) POLYMERIZATION SYSTEM Consisting of 2 UV dryers: Dryer 1 Total length: 2100 mm Total width: 2339 mm Workpiece dimensions: min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: per lamp 80 W/cm² Length of irradiation: 1400 mm Lamp output: 2 x 11.2 kW Air-cooled housing, capacity: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Conveyor belt Vanjakob, Year: 1999, Type Novo 40 Length: 2100 mm Working width: 1300 mm Working height: 880 - 920 mm Feed drive: 0.75 kW Feed speed: 4 – 20 m/min (Line 2 - 4m/min) Dryer 2 Total length: 3340 mm Total width: 2339 mm Workpiece dimensions: min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: per lamp 80 W/cm² Length of irradiation: 1400 mm Lamp output: 2 x 11.2 kW Air-cooled housing, capacity: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Conveyor belt Vanjakob, Year: 1999, Type Novo 40 Length: 3340 mm Working width: 1300 mm Working height: 880 - 920 mm Ihodpfxeyalc Nj Ah Not Feed drive: 0.75 kW Feed speed: 4 – 20 m/min (Line 2 - 4m/min) Shared control cabinet for both drying tunnels: 2000 x 1600 x 600 mm Operating voltage: 400 V, AC, 50 Hz, 3-phase Total output of the complete UV system: approx. 50 kW Operating side of the system: left Total weight of the complete system: approx. 2500 kg (Subject to changes and errors in the technical data, as well as prior sale)

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20526 Specifications: Model: AD500 Year of Manufacture: 2020 Voltage: 400V Maximum Working Pressure: 14 bar Weight: 165 kg Condition: In good working order Delivery Status: Ready for delivery Isdpsxu A Dfefx Ah Noht Description:Pneumatech AD500 refrigerated air dryer, manufactured in 2020. The unit is in good working condition. Ready for immediate delivery and use. Total Weight: 165

Condition: like new (used), Year of construction: 2025, Binder FD 720 Dryer from 2025, like new Iedpjyahp Sjfx Ah Noht PRODUCT DESCRIPTION The BINDER FD Avantgarde.Line series dryer is designed for situations where especially fast drying and sterilization are required. Thanks to uniform temperature distribution, rapid dynamics, and an efficient fan, this dryer helps save valuable time. MAIN FEATURES Temperature Range: - Ambient temperature plus 12°C up to 300°C - Up to 30% lower energy consumption than leading market devices - High temperature accuracy with APT.line™ technology - Forced air convection - Controller with LCD display - Electromechanical exhaust air flap control - 2 chrome-plated wire shelves - Integrated, independent, adjustable class 2 (DIN 12880) temperature safety device with visual alarm - Ergonomic handle design - USB port for data recording

Condition: like new (used), Year of construction: 2025, Binder M 720 Laboratory Dryer, Like New, Year 2025 PRODUCT DESCRIPTION The M series material testing chambers, featuring a maximum temperature of +300°C and multiple programming options, are perfectly suited for materials testing and ageing studies. Thanks to high airflow, high-performance fans provide rapid heating. KEY FEATURES Temperature range: +14°C above ambient temperature up to +300°C High temperature accuracy thanks to APT.line™ technology with increased heating capacity Ihodpfoyahnuox Ah Not Reinforced fan with adjustable speed Electromechanical exhaust air flap control Intuitive controller with touchscreen and programmable time-segment and real-time functions 2 chrome-plated racks Independent, adjustable class 2 (DIN 12880) temperature safety device and optional independent class 3.1 (DIN 12880) temperature safety device with visual/acoustic alarm selectable on the controller Failsafe function – backup Pt 100 sensor PC interface: Ethernet Internal data logger; measured values can be read in an open format via USB