Used Drying Tower for sale (2,693)

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Djdpfx Aey Tipbsh Nsuu

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026. Djdpfxsy Tiaao Ah Neuu

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Dsdpfxey Th Ice Ah Neuu Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, Dry cleaner/ Friction cleaner with 110 kW drive power. Dedpey Thxhefx Ah Neuu Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Duodpsy Thw Refx Ah Nsu Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: used, Year of construction: 2006, Liebherr tower crane 140 EC-H 6 Litronic, works number 44.995 Used Liebherr tower crane 140 EC-H 6 Litronic, manufactured in 2006. This top-slewing crane is suitable for high-rise construction, industrial projects, and large construction sites. Delivery includes foundation cross FK 120 HC, tower sections, and additional ballast. Manufacturer: Liebherr Model: 140 EC-H 6 Litronic Machine type: Top-slewing crane Works number: 44.995 Year of manufacture: 2006 Jib length: 60.0 m Hook height: 30.0 m Duedpfjy Thd Rex Ah Nou Load capacity class: 6 t Control system: Litronic Foundation cross: FK 120 HC Foundation dimensions: 4.60 m Assembly on A3 plates Additional ballast: 2 x S1 Tower system: GTS 140 HC Tower section: 6.85 m Tower sections: 1 x 120 HC 10.0 m Tower sections: 1 x 120 HC 12.5 m Application area: High-rise construction, industry, construction sites Condition: used Location: Berlin

Condition: used, Year of construction: 2005, Liebherr top-slewing crane 180 EC-H 10 Litronic, serial number 44.173 Used Liebherr top-slewing crane 180 EC-H 10 Litronic, manufactured in 2005. The top-slewing crane, with a 45.0 m reach, is offered for sale. Suitable for high-rise construction, industrial projects, and large construction sites. Manufacturer: Liebherr Model: 180 EC-H 10 Litronic Machine type: Top-slewing crane Serial number: 44.173 Year of manufacture: 2005 Duedpfx Aoy Thdqeh Nou Reach: 45.0 m Load capacity class: 10 t Control system: Litronic Design: Top-slewing crane only Application area: High-rise construction, industry, construction sites Condition: used

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Duedpfeynkbmex Ah Nsu Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Dedpfxoy Au Ubo Ah Neuu Model: Sprint International Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Dujdpey Uydlofx Ah Nou

Condition: used, IL 2 control unit for ILSA Multimatic. Duedpfx Ajy Uv Uaeh Nou

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning, including intensive and large-scale projects. The main advantage of this unit is its minimal reliance on new-generation electronics. It is one of the most powerful machines available on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, Complete with the Following Equipment: - COLD JET AERO 75 DX DRY ICE (only 12 operating hours) Duedpfx Aewg R Edjh Nou - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) One of the best machines worldwide. No electronics inside, making it highly reliable and affordable to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold include a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. New Cold Jet machines are also available through us. Contact us for more details. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2011, Passage width: 3000 mm. Passage height: 30 mm. Djdpfx Ahowptxlo Neuu Inlet section to the system: Length approx. 2250 mm. Outlet section: Length approx. 3970 mm. Total length: approx. 10,220 mm.

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Dodowum Svepfx Ah Nouu Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) - External Module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Dew point: stable at approximately -60 °C, ensuring thorough drying of hygroscopic materials. Dry air flow rate: from 80 m³/h to 180 m³/h for devices in the compact series. Pre-drying time: reduced to only 3–4 hours for standard materials. Duodpfxsy Ud T Re Ah Nou Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max).

Condition: good (used), Year of construction: 1995, Ref. no.: 18439 Manufacturer: MOTAN Type: LA8-200 Year of construction: 1995 Further information: MOTAN Central Drying & Vacuum Conveying System Complete MOTAN central drying and automatic material conveying system for plastic injection molding applications. The system includes: * 15 pcs stainless steel drying hoppers * Hopper capacity: 60 liters each The system was used in technical plastics production and is suitable for processing hygroscopic materials such as: PA, PC, PET, PBT, ABS, TPU and other engineering plastics. System Components 1. MOTAN ADC 200/10 Dry Air Generator * Year of manufacture: 1995 * Dry air capacity: approx. 200 m³/h * Heating power: approx. 19.5 kW * Central dry air generation system * Desiccant drying technology Function: Provides low-humidity hot air for the drying hoppers. 2. MOTAN LA net 200 Central Control System * Year of manufacture: 2006 * Central process and automation control unit * Touchscreen operator panel * Drying and conveying process management * Alarm and monitoring functions Function: Central control of all drying, conveying and material distribution processes. 3. Drying Hoppers * 15 pcs stainless steel drying hoppers * Hopper volume: 60 liters each * Central dry air connection * Automatic material loading * Suitable for technical plastics drying 4. Central Vacuum Conveying System * Elmo Rietschle central vacuum pump * Automatic granule conveying system * Central material distribution * Multi-machine supply capability 5. Stainless Steel Piping & Filter System * Central conveying pipework * Filter units * Material loaders * Automatic distribution station Working Principle Plastic granules are automatically conveyed through the central vacuum system into the drying hoppers. The MOTAN ADC 200/10 dry air generator produces low-humidity hot air which continuously circulates through the material inside the hoppers. During this process, moisture is removed from the plastic granules to prepare the material for injection molding production. After drying, the material is automatically transported through the central conveying lines and distributed to the connected injection molding machines. All drying and conveying processes are centrally controlled via the MOTAN LA net 200 control system Condition Dedsy Udfyopfx Ah Nsuu The system was in production operation until dismantling. Further technical information, photos and videos available on request.

Year of construction: 2013, condition: used, Drying chamber / Circulating air drying chamber / Wood drying chamber / Drying plant Mühlböck VLSM2120 External dimensions: Length: 7.1 meters Depth: 4.4 meters Height: 5 meters Djdpfx Ahewpfwyo Njuu Internal dimensions: Length: 6.4 meters Depth: 3 meters Height: 4.2 meters Technical data: Year of construction: 2013 Heating capacity: 102 kW Flow temperature: 90 degrees Water quantity: 6 m3/h Electrical connected load: 4 kW Fans: 3x1.1 kW optionally with wood chip heating system

Condition: used, Length 3.500 mm Depth 1.000 mm Djdpfow I Sykjx Ah Nouu Height 2.000 mm ca. 700 kg Sturdy Lübbers paint drying trolley with adjustable center rake. Available: 15 units Price per unit: € 490.00 + VAT.

Condition: excellent (used), functionality: fully functional, Schomaker STWC-600 | Dry Breader Manufacturer: Schomaker Type / Model: STWC-600 Serial Number: 280515 Mesh belt width: 600 mm Belt material: Stainless steel Overall dimensions: 2900 × 900 × 1930 mm Equipped with an integrated, upper hopper for breading material (e.g., breadcrumbs, flour, or fine-grained spices). Dusdoy Ub S Ropfx Ah Neu The STWC-600 is a fully professional, industrial dry breader designed for the automatic and continuous coating of food products with dry breading. This machine is a key component of "convenience food" production lines, working directly with formers and liquid breaders (which apply batter or dough). It is an ideal solution for the production of nuggets, cutlets, fish sticks, poultry wings, and vegetable-based and molded snacks. The 600 mm working width of the mesh belt guarantees excellent throughput, allowing for smooth synchronization of the device with efficient frying or freezing tunnels. Key features and operating principle: - Full coating system (360°): The device evenly applies breading to all sides of the product. The bottom part of the product is coated by passing over the so-called "breading bed" on the belt, while the top and side sections receive a uniform flow of medium from the integrated curtain system. - Recycling and breading saving system: The machine has a built-in internal transport system (e.g., screw conveyor or vertical conveyor) that collects excess unused breading from the lower trough and transports it back to the upper hopper, operating in a closed loop. - System for removing excess breading: The equipment is fitted with an adjustable air blower or a vibration system, which effectively removes loose, excess amounts of breadcrumbs or flour from the product before it enters the fryer, preventing oil from burning and improving the appearance of the product.

Condition: used, The device is in good working order and ready for use; it can be used to dry fruits or vegetables after washing. Duodpfxjy Uaxij Ah Nou Length: 6000 mm Working width: 700 mm Overall width: 950 mm Height: 900 - 1300 mm Please check out my other listings.

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Dodpfx Aou Tipkjh Neuu Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control Djdpfouvi Saox Ah Njuu - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2016, condition: excellent (used), Painting booth Diana serie with horizontal ventilation Modern technology: Dust free operation paint overspray collection system Stable spraying temprature Control box with safety function Length:16000mm Dusdjygum Rjpfx Ah Nju Width:6000mm Height:6000mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VJ II 2-9090-4180 – 7,8m Gas Textile Tunnel Drying Machine Professional industrial gas-powered textile tunnel drying machine manufactured by HEBBECKER, designed for continuous high-volume textile screen printing production. The machine provides efficient and uniform curing performance while maintaining low operating costs thanks to its gas heating system. Ideal for industrial textile printing facilities requiring reliable and energy-efficient drying solutions. Technical Specifications Manufacturer: HEBBECKER Model: VJ II 2-9090-4180 Year of manufacture: 2020 Machine type: Gas Textile Tunnel Dryer Heating system: Gas-powered Application: Textile screen printing curing and drying Continuous conveyor drying system Heavy-duty industrial construction Key Features Gas heating system for energy-efficient operation Continuous industrial conveyor belt Dujdpfxey Ty Sgj Ah Nou Uniform heat distribution technology Adjustable conveyor speed Stable temperature control High-capacity production performance Suitable for plastisol and water-based inks Optimized airflow and curing efficiency Reliable industrial production design Low operating and maintenance costs Advantages Lower energy consumption compared to electric dryers Fast and consistent curing results Ideal for continuous production environments Excellent integration with automatic screen printing lines Robust and reliable industrial-grade construction Advanced Technical Features Gas-powered industrial tunnel dryer Continuous conveyor belt system Optimized hot air circulation technology Uniform temperature distribution Adjustable conveyor speed control High-efficiency curing performance Industrial heavy-duty insulated construction Designed for continuous 24/7 production Suitable for plastisol, water-based and discharge inks Stable industrial temperature management Energy-efficient gas heating system Optimized airflow for consistent curing quality Low operating costs compared to electric dryers Industrial-grade drive and transport system Reliable high-volume production performance Production Advantages Fast and uniform textile curing Excellent integration with automatic carousel printing machines Reduced energy consumption Stable production workflow Consistent print curing quality Suitable for industrial textile printing environments Easy maintenance and operation Machine Construction Heavy-duty steel frame Industrial conveyor transport system Insulated heating chamber Professional industrial production design Built for long-term industrial operation

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Duodpsvc Axpjfx Ah Nju Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location