Used Drill Rig for sale (7,207)

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Lrodpow Rag Dsfx Ad Nog Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery.

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Lrsdpfx Aex Anauod Njg Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: used, Year of construction: 1996, Serial number: 8xxxx Lredpfx Adexz N Ahj Nog Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: used, operating hours: 20 h, Fuel type: Diesel Lsdsuu Df Depfx Ad Njrg

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz Ljdpfsn N Ekcex Ad Nerg - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Lodelhwr Ropfx Ad Nerg Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Year of construction: 1980, voltage 50 V frequency 50 Hz ampere 3,7 A Ljdpfx Adex U A Slo Nerg 21882 speeds: 3

Condition: used, Year of construction: 1970, taper MK 4 feeds: ja weight of the machine ca. 1,5 t Lrsdpfsxzu Dqox Ad Neg

Condition: used, Year of construction: 1980, taper MK 4 Lrsdjw Sydlepfx Ad Nsg serial number 520 weight of the machine ca. 440 kg

Condition: used, Year of construction: 1965, 40-1080 tool taper MK 5 weight of the machine ca. 2 t feed . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Ledpfx Aoiyzqqed Nsrg Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 3 - 16 mm max. 1500 mm weight 300 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Lredehmribepfx Ad Njg Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V connected load 2,6 kVA rated current 6,1 A weight of the machine ca. 1 t Ljdporxg S Tjfx Ad Nsrg

Condition: used, Year of construction: 1980, 1980 tool taper MK 205 - 1450 m/min. boring range: 3 - 40 mm Lsdpfsr Dv Tgex Ad Nsrg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg +++++ Please note: Ledpfx Adsfym Hus Njrg The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1979, taper MK MK5 round table ja Lrodpsf Ek Risfx Ad Nsg weight of the machine ca. 1.200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, ja feed 80 - 800 m/min 1848 weight of the machine ca. 2,2 t +++++ Please note: Lredpfx Adsix Rdms Njg The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW weight of the machine ca. 0,5 t Lodpfsvn U Umjx Ad Nerg dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm Lredpfewid Uwsx Ad Neg throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm Lodpfjviqybsx Ad Norg spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: like new (used), Year of construction: 2018, 2018 Schmid SE 349-2 Vertical Drilling/Tapping Machine with Siemens 840D Control (New/Unused, In Shipping Crates) - Note: Images are for reference only. The machine is a new 2018 model and remains unused in its original shipping crates in offsite storage. Photos shown are of the same model for illustration purposes only. With 6 Jaw Ø4,300mm Chuck. Maximum Workpiece Ø4,000mm. Axis Travel 'X1'=600mm, 'X2'=600mm, 'Z1'=1,000mm, 'Z2'=1,000mm. Rapid Traverse 'X1'=30m/min, 'X2'=30m/min, 'Z1'=30m/min, 'Z2'=30m/min. Minimum Distance Between The Rams 1,200mm. Ram Dimension 450 x 450mm. Spindle Taper HSK 100. Maximum Spindle Speed 4,000rpm (63kW Motor). Torque (S6-40% ED) Nm 859. 36 Vertical Position ATC, 10 Horizontal Position With Dual Right Angle Heads. With Automatic Doors, Knoll High Pressure Paper Filtration Coolant System, Dual Chip Conveyors, Schimpke Chiller Unit, Weight 30,000kg. Lredpex Swv Hjfx Ad Nsg

Condition: ready for operation (used), A column drilling machine Alzmetall with a rotating round table is available. Drilling capacity steel/cast iron: 45mm/50mm, reach: 345mm, tool holder: MK4, speed: 720rpm. Machine dimensions X/Y/Z: approx. 1100mm/600mm/2000mm, weight: approx. 650kg. An on-site inspection is possible. Lrjdpfx Aex Hz N Tod Njg

Condition: good (used), functionality: fully functional, mount diameter: 80 mm, throat depth: 200 mm, spindle mount: MK 1, table width: 320 mm, table length: 250 mm, stroke length: 70 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz morse MK-1 chuck max drill size: M6 -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm Lrjdjwzaqxopfx Ad Neg -Reach: 200 mm -Column Ø: 80 mm -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine Lrsdpfx Asikrtqjd Nsg - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: used, Column Drilling Machine INFRATIREA - ORADEA Type PH - 031 Serial No. Year of manufacture 1975 Drilling capacity 40 mm Spindle taper MK 4 - short quill Throat depth 320 mm Lsdpstrpifjfx Ad Nsrg Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 - 1500 rpm, 6-speed gearbox Motor power 2.2 kW Power supply 400 Volt, 50 Hz - Spindle speed adjustable over 6 gear steps - Right and left-hand rotation - Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/rev - Swivel drill table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump integrated in base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg

Condition: ready for operation (used), A small column drilling machine Optimum is available. Drilling capacity steel/cast iron: 30mm/35mm, spindle mount: MK4, speed: 2000rpm, quill stroke: 120mm, quill diameter: 75mm, column diameter: 115mm, table dimensions X/Y: 500mm/420mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/1950mm, weight: approx. 220kg. An on site inspection is possible. Lrodpfxexxbaas Ad Nog