Upright Drilling Machine

ALKETT B78ASt

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) Nwsdpewki Apjfx Ah Hob - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Nsdpjwk D Efsfx Ah Hswb Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos Nsdpjnzpx Rsfx Ah Hswb -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Max. swing dia. over bed 356 mm Max. swind dia. without swivel bed bridge 506 mm Center height 180 mm Max turning diameter over cross slide 220 mm Max. turning length 1000 mm Spindle face D1-4/DIN55029 Spindle bore 38 mm Threads that can be cut Metric, Withworth, Module, Spindle speed 45 – 1800 rpm Tailstock taper Morse 3 Tailstock sleeve travel 120 mm Motor power 2.4 kW Machine weight 900 kg Machine dimensions 1945 x 785 x 1204 mm Accessories - 3-jaw D160 mm chuck - 4-jaw D200 mm chuck - Face plate D320 mm - 3 axis DRO - Electromechanical spindle brake - Steady and travelling rests - Center - Coolant unit - Halogen work lamp - Splash guard - Chuck protection - Tool post protection - Manual Nwedpfxjxbz Ebj Ah Heb Brand new center lathe with zero working hours. Showroom model.

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Nwedpfx Ahot Iklke Hob Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: good (used), Year of construction: 1984, Offer 24126 Motorized bar turning machine + ring and bending machine Technical data: Nwsdpfxsr Ik N Do Ah Hsb - Bending process mot. with automatic or manual operation - Bending capacity square bars ST 37 up to approx. 30 mm - Bending capacity flat bars ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twisting length 10 x material thickness (long side) - Bending time preselection / bending length preselection - Right - left rotation - Tailstock - Arch + ring bending device GRB 66 with various roller sets - Bending capacity - flat steel 60x10 mm high R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 ½" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roller sets steel 1 ¼" , plastic 1 ½" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW - Weight approx. 250 kg

Condition: as good as new (ex-display), Year of construction: 2025, Max. over bed diameter: 330 mm Max. swing diameter without bed bridge: 476 mm Max. swing diameter over cross slide: 198 mm Center height: 165 mm Turning length: 500 mm Spindle end: D1-4/DIN55029 Spindle bore: D38 mm Can be cut threads: Metric, Whitworth, Module Spindle speed: 70 – 2000 rpm Tailstock taper: Morse 3 Motor power: 1.1/1.5 kW Machine weight: 500 kg Machine dimensions: 1320 x 610 x 1400 mm Accessories, Equipment - 3-jaw D160 mm chuck - 4-jaw D200 mm chuck - 4-station tool post - Electromechanical spindle brake - Follow and stationary steady rest - Coolant system - Halogen work light - Feed guard - Splash guard - Manuals The machine is in brand new condition. Operating hours are 0. Showroom machine. Nwsdpfx Aoxb Axcoh Hjb

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 Nwedpfxeu Tq U Ij Ah Hjb weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Nwsdpfsu Ixznjx Ah Heb Steel plate Ø 705mm with offset threaded holes *

Condition: new, Variable-speed ISO 40, Motorized cross table on all axes. 3-axis viewer included. Base with chip tank. Refrigeration system. Led lamp. Mechanical speed indicator. Variable speed motorized axes with rapids. Rail lubrication system with manual pump. Milling capacity with insert cutter : mm 100. Milling capacity : mm 35. Drilling capacity on cast iron with pre-hole : mm 60. Max drilling capacity on steel with pre-hole (s235jr) : mm 24. Spindle taper : ISO40 DIN2080. Spindle sleeve : Nodpfx Ash Im H Ssh Hswb mm 86. Spindle stroke : 120 mm. Head inclination : +/- 45°. Vertical head rotation : +/- 90°. Head body rotation : +/- 180°. Vertical spindle speed : (2) 60 ÷ 500 |500 ÷ 3600 rpm. Motor : 400 V 50 Hz 2.25 kW. Distance between machine nose and table : 45 - 395 mm. Spindle-column axis distance : 215-450 mm. Table size : 1246 x 230 mm. Longitudinal table displacement : 850 mm. Transverse table displacement : 310 mm. Maximum load capacity : 400 kg. Dimensions : 1680 x 1500 x 2100 h mm. Net weight : 1000 kg.