Upright Drilling Machine

CORDIA MK 3

Condition: good (used), Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, Lrodpfxed Tk Sts Apvol -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Lrsdpfsxlqxfox Apvel Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Lrjdpfswuqbbex Apvsl Flat (W x H): 400 x 320 / 210 x 320

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless Ledpfx Ashx E T Hopvjrl -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 375 mm, travel distance Y-axis: 230 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 115 rpm, type of input current: three-phase, overall weight: 200 kg, table length: 700 mm, table width: 190 mm, power: 0.75 kW (1.02 HP), distance table to spindle center: 405 mm, WMD32G - ROGI Gear-Driven Milling and Drilling Machine Drilling Capacity ----- 32 mm Face Milling Capacity ----- 63 mm End Milling Capacity ----- 16 mm Work Table Dimensions ----- 700 x 190 mm T-Slot Dimensions ----- 12 mm Spindle Taper ----- ISO30 Max. Distance Spindle - Table ----- 405 mm Spindle Travel ----- 75 mm Head Tilting ----- Left / Right 45 Degrees Table Longitudinal Travel ----- 375 mm Table Cross Travel ----- 230 mm Speed Range 115 - 1700 rpm Weight ----- 200 KG Motor ----- 750W AC Voltage ----- 230V (INVERTER) INCLUDES * 3-axis digital readout SINO * Floor stand * Digital depth stop * ISO30 milling arbor including 6 collets * Drill chuck with shank DIN2080 / ISO30 * Left / Right switch * Spindle guard * Drift key Lredpfx Asx N Ndqopvjl

Condition: ready for operation (used), Year of construction: 1975, Column drilling machine Lredpehtri Esfx Apvsl Make CORDIA Type: S-18 Year.ca.1975 drilling in steel max.18mm spindle mounting : MK2 spindle speed : 90 -1450 rpm spindle stroke : 120 mm table:350 mm X 400 mm clamping surface;270 mm X 320 mm Space requirement : width 420mm depth 650mm height:2000 mm Weight:ca.350 Kg. Machine is ready for use .

Condition: used, bore capacity in steel (diameter) 32 mm Short spindle MK 3 bore depth 175 mm spindle throat 320 mm column diameter 130 mm distance spindle /table 140-790 mm feed 0,1 - 0,16 - 0,25 m/min Ledpfx Ajyv I Unepverl number of spindle speeds 60-1600 weight of the machine ca. 450 kg

Condition: used, bore capacity in steel (diameter) 40 mm throat 380 mm bore stroke 160 mm 4 speeds 60 - 1250 U/min total power requirement 3,3 kW weight 900 kg Features: Ljdpfxexddtyo Apvjrl -Gear drilling machine with a robust design -Column-mounted drilling table -Right/left rotation -Feed -Coolant system

Year of construction: 1966, condition: not inspected (used), Rough SM fine drilling mill, drilling mill -WKG 385- Offered here is fine boring mill of the company Grob. Lrsdpfehg Nxxsx Apvel Technical data: Manufacturer: Grob Type: SM Year of manufacture: 1966 spindle throat max.: 450mm spindle speed min.: 205 rpm spindle speed max.: 610 rpm number of spindles: 2 pieces table length: 300mm table width: 550mm distance table to spindle: 750mm feed: hydraulic

Condition: new, Main Motor Power 22/26 kW Table Size 1000x2000 mm Max. Load Capacity 4000 kg T-slot Size 7x22x140 mm X/Y/Z Axis Travel 2100x1000x1400 mm X,Y,Z Cutting Feed Rate 1-8000 mm/min X, Y, Z Rapid Traverse Rate 12,12,12 m/min Spindle-Table Distance 100-1500 mm Spindle Taper ISO50 Max. Spindle Torque 475Nm Spindle Speed 2000 rpm Magazine Type/Capacity 24 Tools / Arm Type Max Tool Diameter Φ105/200 mm Max. Tool Length 300 mm Max. Tool Weight 15 kg Lodpfoy T H R Aox Apvorl Positioning Accuracy 0.02/0.015/0.02 mm Repeat Positioning Accuracy 0.012/0.01/0.012 mm Machine Dimensions 4200x2500x2500 mm Machine Weight 12000 kg