Used Anchor Drill Rig for sale (31,838)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Gslowwxzzjhcdwzsiw Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Gslhcdewvzrmswzeiw Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery.

Year of construction: 2023, Condition: new, machine/vehicle number: 383036928, 16x 120mm DTH drill pipe , 4000 mm x 85 mm , 2 7-8\" API Reg 02x Adapter shank 2 3-8\" API Reg Pin x 2 7-8\" API Reg Box 02x 140mm DTH drill bit 02x 5\" DTH Hydraulic breaker with DHD350 shank, 2 7-8\" API More information Gelhcshypv Uodwzsiw Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Year of construction: 1997, Condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Gijlhcdwol Tn Epezjw

Condition: used, Year of construction: 2010, Field of application: Construction Serial number: 110M153xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19576 Specifications: - 2010 model - Hours: Approx. 2900 - Weight: 5200 kg - 62 kW - Tires (see pictures) - Winch - Radio control - Ready for delivery Description: Sandvik DC300R Drilling rig from 2010. Owner says he recently had it serviced. Ready for delivery. Hours: 2900 Total Weight: 5200 Kw: 62 Gslhcovyf I Iedwzoiw

Year of construction: 2023, Condition: new, machine/vehicle number: 801694948, Boring rod + hydraulic hammer Gjlshypv Rohcdwzoiw 8x 76mm DTH drill pipe , 4000mm x 63mm, 2 3-8\" API Reg 1x 3,5\" DTH Hammer with \" shank with 2 3-8\" API More Information Intended use: construction,

Condition: used, Year of construction: 2010, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 18549 Specifications: Gislhcdjvgy E Ujwzsw Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Total Weight: 8000 Kw: 55

Condition: used, Year of construction: 2007, Field of application: Construction CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 19692 Specifications: - Model year: 2007 - Engine hours: 6060 hours - Hammer hours: 2496 hours - Weight: 14,900 kg - Machine width: 241 cm - Belt width: 30 cm - Central lubrication - Straight grinder - Chassis (see pictures) - Compressor - Wear parts included - Hammer has been repacked every 400 hours - The engine has had an oil change and filter change every 250 hours - Carousel - Radio control - Winkelm gauge - Meter gauge - Diesel heater - Ready for delivery Description: We have for sale a 2007 Atlas Copco D7 Drilling Rig , which has been well maintained and is in working order. The machine comes with a significant stock of wear parts and filters, and the owner has carried out regular oil changes on the engine every 250 hours and on the hammer every 400 hours. The rig is a bit slow to start, but the owner lets it run with the diesel heater for 15-20 minutes before starting, and then it starts easily. The idler wheel on the left side is a bit worn and needs to be replaced, and there is also a need to replace some hoses on the vacuum cleaner. The rig is from 2007, so some errors and defects may occur, and some expense will be required to get it back in top condition. However, it is ready for delivery and use. Total Weight: 14900 Gislhcdwjvyf Nljzow Width: 241 CE: Yes

Year of construction: 1999, Condition: used, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 11049 Specifications: - 1999 model - Hours: approximately 12,750 - Winch - Vacuum cleaner - 38 hammers - 4 cylinder water-cooled Deutz engine - Okay chassis Gelhowwqhmocdwzjiw - Ready for delivery Description: Owner says it works as it should and that it is a 1999 model It is Ready for Delivery Own weight: 1 Model: Copco

Condition: used, operating hours: 20 h, Fuel type: Diesel Intended use: Construction Power: 354 kW (481 hp) CE marking: yes General condition: very good Gijlhouu Df Decdwzsw Technical condition: very good Visual condition: very good Damage: none

Condition: used, Year of construction: 2008, Field of application: Construction Serial number: AVO08A1388/8992 005xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20163 Specifications: - 2008 model - Engine hours: Approx 13000 - Impact hours: Approx 6500 hours - Weight: 15000 kg - Machine width: 241 cm - Track width: 30 cm - Meter counter - Angle gauge - 1838 Hammer - Stand changer - Carousel - Replaced screen - Replaced engine (unsure of hours) - Repacked cylinder on swing and tilt on tower - Service performed by owner - Undercarriage (see pictures) - Lights - Radio control - Ready for delivery Description: We have a 2008 Atlas Copco D7-01 Drilling rig w/ cop1838 hammer carousel and stand changer for sale. Gslhcdwowdvg Uozsiw The engine and screen on the rig have been replaced. Some cylinders on the swing and tilt of the tower have also been repacked. The rig otherwise functions as it should according to the owner. Errors and defects may occur Ready for delivery. Hours: 13000 Own weight: 15000 Total Weight: 15000 Width: 241 Hammer hours: 6500 Model: D7-01

Condition: used, Year of construction: 2004, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Giolhjvg Nt Iscdwzsw Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000

Year of construction: 2011, Condition: used, Field of application: Construction Serial number: 110245xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20555 Specifications: Golhcdwowph Egozeiw Model year: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily use) New chains on the mast Undercarriage: see photos for condition Boom rotor replaced about a year ago (cost: EUR 21,000) Oil leakage under the rig Tracks at the front of the mast are damaged and need replacement Hammer not included Video available Delivery by arrangement Description:2011 Gemsa Gemrok 45 SDKJM drill rig.Fitted with new chains on the mast and storage unit. The boom rotor was replaced approximately one year ago, with a total investment of EUR 21,000.There is an oil leak under the rig, and the front tracks on the mast are damaged and will need to be replaced.The machine is currently in daily use, so the hour count may increase.A video is available upon request. Delivery to be arranged. Hours: 7200

Condition: used, New: No Field of application: Construction Serial number: A00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20517 Specifications: - Unknown model year - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage - Undercarriage (see pictures) - Lights - Ready for delivery Gislhswph D Aecdwzjw Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Width: 255 Hammer hours: 3049 Engine hours: 5224

Condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20521 Specifications: Hours: Uncertain Chassis: See pictures Belt width: 30 cm Total width: 230 cm Vacuum cleaner Gislhcdswphu Ujwzow Winch Deutz engine Maintenance is taken care of by owner Ready for delivery Width: 230

Condition: used, Year of construction: 2011, operating hours: 9,515 h, Horizontal flushing - drill rig, rock drilling rig * Ditch Witch, * Type JT 3020 Jet Trac, * Year 2012, * 9515 hours read according to counter, * Drive via 4-cylinder Cummins diesel engine with 124 KW / 168 HP, * 2 speed levels, * Single cab with 1 seat, * Transport dimensions length x width x height 5600 x 2300 x 2450 mm, * Weight 12000 kg, * Crawler chassis with rubber track 10-15 mm, * Track length x width 2400 x 320 mm, * Hydraulic 4-point support, * Rod magazine (35 drill rods in the magazine? Diameter 60 mm), * 3 x rock drill bits, 1 x extension, pullback heads see pictures, * Remote control, air conditioning, * Mixing unit consisting of mixer with petrol engine and 2 water tanks, * Probe for control This description does not constitute a binding offer and may contain errors. No guarantee on all details. Visit our homepage as well Gslhowqv Acecdwzeiw

Condition: new, Year of construction: 2024, Functionality: fully functional, Thrust press system Push and pull force: 24/30 t Hydraulic station 50 m boom Expanders: 80/132/160/200 mm Without locating device Price: €25,000.00 net Dry drilling: no bentonite used, no bentonite disposal Gjlhouy N H Eocdwzjiw

Condition: good (used), Year of construction: 2018, Burning and Drilling Machine Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic turret Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5–40 mm V-Scoring marking: 5 to 40 mm Minimum sheet size: 1,500 x 300 mm (750 x 400 mm with restrictions) Minimum dimensions of finished parts: 80 x 80 mm Maximum sheet weight: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or sheets: 4,000 x 2,000 mm Zero position cross conveyor Golhcdevzrczowzoiw Number of carriages: 2 gripping jaws NC feed carriage, laterally positioned 4 clamping jaws (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Discharge side: Discharge roller conveyor with lowerable unloading table and chute to material collection container for unloading small components. Filter unit including piping High performance for the use of carbide tools. For drilling, thread cutting, marking, milling, plasma cutting of flat steel and sheets. Software options for milling and marking LANTEK license Availability: immediately

Condition: excellent (used), Functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 8,000 kg, Year of construction: 2022, operating hours: 2,500 h, Hello, I have a Beretta GT52 vertical drilling rig for sale, year of manufacture 2022, operating hours 2500. The rig is equipped with: - CAT engine with a power of 136 HP with the latest Stage V emission standards Gielhewkbh Rocdwzew - Bellin 1200L screw mud pump (capacity 500 l / min and 12 bar discharge pressure) - Hydraulically lifted rod magazine - Winch with a pulling force of 2000 kg - Floating head with vibration damper, used with a DTH hammer (possibility of drilling with both a hammer and a rotary mud) - Hammer lubricator + air line - Magnetic system for feeding the rod / pipe set. - Triple jaws (can be used to drill with casing pipes) Dimensions (folded): width 190cm, height 249cm, length 580cm. Mast height 690cm Maximum drilling depth 200m The drill is fully functional and ready to work. We are selling it because we have purchased a larger, two-headed device. For more information, please contact us by phone.

Condition: used, Year of construction: 2012, operating hours: 6,006 h, TM Bohrtechnik TMB 25 drill rig, year of manufacture: 2012, operating hours compressor: 6,006h, operating hours diesel engine: 8,718h, 6x drill rods, drill head, dust collector, ready for immediate use, good condition, German machine, On request, we can make you a leasing or financing offer from Mercedes-Benz Bank, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! _____ TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, working hours kompressor: only 6.006h, working hours diesel engine: 8.718h, 6x drilling pipe, drlling head, dust collector, ready for work, good condition, german machine, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved! Gislhcdsrrbm Rjwzew

Condition: good (used), Functionality: fully functional, Year of construction: 2008, * Engine hours 10,644 * Drilling hours 4,039 * Engine power 224 kW Golhcowl Dupsdwzjiw * Operating weight 21,600 kg

Condition: used, Year of construction: 2009, operating hours: 10,202 h, Horizontal flush drilling rig, Tracto Technik, Grundodrill 15 XP * Grundodrill * Type 15XP, Golswfvwvehcdwzoiw * Year of manufacture 2009, * 10,202 hours read according to the counter * Powered by a 4-cylinder Perkins diesel engine with 106 kW / 144 HP, * 2 speeds, * Single cab with 1 seat, * Transport dimensions (length x width x height): 6450 x 1900 x 2250 mm, * Weight 9620 kg, * Crawler chassis with 10-15 mm rubber track, * Undercarriage length x width: 2350 x 400 mm, * Rod magazine (31 drill rods in the magazine, diameter 60 mm) * 2 drill heads, 2 retractor heads (see pictures) * Remote control, air conditioning This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Visit our homepage

Year of construction: 2023, Condition: used, machine/vehicle number: 0799-250012, TM Minibox by Hartner – The compact solution for maximum tool control Gielhewpr Tnscdwzow Increase your efficiency directly at the workplace: The TM Minibox is the smart, space-saving tool dispensing system for your production. Whether as an entry into digital tool management or as a supplement to your existing infrastructure – with the TM Minibox you take your production to the next level.

Condition: excellent (used), Functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 5,200 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2023, operating hours: 397 h, Equipment: adjustable chassis, cabin, differential lock, hammer hydraulics, steel tracks, For sale a practically new piling machine of the Chinese solid brand Hengxing model HX R536D-1 with very low working hours, it is a self-propelled vehicle on metal tracks, a functional device and equipped with a hammer and drill for drilling. - We are able to transport this machine throughout Europe and Poland of course after verifying the distance. In addition, we are able to make a lease or loan for this machine. - Technical data: Name: Piling drill Manufacturer: Hxing Type/model: HX R536D-1 Serial number: HX-985-21205 Year of production: 2023 Working time: 397 h Basic technical data according to the manufacturer and nameplate Impact energy: 1400 J Piling depth: 5.1 m Gielhcswrb Iysdwzjw Hole diameter: From 50 to 300 mm Efficiency: 1 m/min Power: 70 kW Dimensions during operation: 3500 x 2650 x 7500 mm Transport dimensions: 6500 x 2500 x 2500 mm Own weight: 5.2 t Equipment: Hydraulic hammer Drill Inspection report: After checking the machine does not indicate any problems with its operation. All actuators and the engine without leaks, of course it is a used machine so you can't expect perfect condition but it is very good . The set includes a hammer and drill, tracks in very good condition without play.

Year of construction: 2004, Condition: used, machine/vehicle number: 0201-250003, Voortman V600 drilling machine for profiles and flat steel with a movable drilling unit. CNC-controlled drilling unit with longitudinal travel, adjustment from 0 to 18,300 mm, with manual quick-change tool chuck, vertical hydraulic hold-down device, web and flange height measurement, and automatic, electronically infinitely variable feed and speed control (continuous monitoring), enabling optimal machining. Adjustment via frequency-controlled spindle drive. Thread cutting with special tools is available for an additional charge. Punching points can be added. Gslhcdwov Rl S Iozeiw