Used Double End Trim Saw for sale (37,650)

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm Gedpfovwgnwsx Agbott saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use.

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle Gjdpfx Aeg Db U Ajgbstt ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Year of construction: 2000, condition: good (used), Power: 5.5 kW Weight: 2,200 kg Gtodpfx Agew S Nycobot

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Year built: 2019, as new condition - LCD display with backlighting - Pre-installed interface for industrial label printer connection - USB port - Capability for single cuts - Storage for 99 profile correction values and automatic calculation of cutting lengths for miter cuts - Storage for 20 cut lists entered via the keyboard (up to 50 sets each) - Storage for 10 cut lists imported via RS232 serial interface from an external PC (up to 100 sets each) MACHINE FEATURES - Position detection of the movable unit via direct measuring system with magnetic tape - 2 carbide-tipped saw blades, diameter 500mm - Pneumatically operated full safety covers over the cutting area - 2 pneumatic horizontal clamping units with low-pressure safety device - Profile support roller conveyor - Lubrication system: mist spray or minimum quantity pulse spray system (depending on version) - Cuts with saw blades Ø 500 mm in the miter range from 22°30’ (external) to 90° - Manual profile support - Pre-installed interface for automatic activation of MG4 chip extraction unit - Two standard profile inserts - Metric scale - Label printer incl. label peel-off function Godpfxow Svxlj Agbett - Overlength cut - Shortcut - Cross cut - Macro - Automatic cut - Pro software package

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, saw drive: 31,000 W, total length: 17,000 mm, total height: 1,000 mm, height adjustment type: mechanical, total width: 2,500 mm, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Godpfewa T Dcjx Agbstt Please contact us if you are interested or have any questions.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2950x1620x1770 mm Weight 3300 kg Total power requirement 71,5 kw Gtodpfx Agevz Hxkjbjt

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler Gjdpfx Ajgy Dbdjgbett -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles Gedpfjq Ii Dlex Agbett max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Offer – Double Mitre Saw Emmegi Norma 400 Gtodpfxsw R T Tqj Agbjt We are pleased to offer you the Emmegi Norma 400 double mitre saw – a precise and reliable machine for professional cutting of aluminium and PVC profiles. Technical Data: - Saw blade diameter: Ø 400 mm - Cutting length: up to approx. 4,000 mm, minimum length approx. 485 mm - Saw head swivel range: ± 45° (inwards/outwards) - Drive: Hydropneumatic feed, motor power 2.2 kW per head, braking time approx. 10 s - Workpiece clamping: Pneumatic, horizontal and vertical, with 'low pressure' safety feature - Cooling: Oil-water micro-mist system

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm cutting lenght max. 4000 mm saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min Gtedpfx Asd Il A Iogbot coolant capacity 45 degrees: square 95 mm capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment

Year of construction: 1983, condition: good (used), RÜCO double crosscut saw Type 22 Year of manufacture 1983 S/N 10860 Working range : cutting size 2600 x 2200mm smallest cutting width 210mm cutting height 100mm with saw blade Ø 450 = 125mm Technical data: Gtjdein E Rqspfx Agbet Saw blades each 45° tiltable 2 X main motor 4,0 KW, saw blade Ø 400 mm 2 X scorer 0,56 KW, saw blade Ø 140 mm Weight 1400 Kg space requirement approx. 4400 x 4000 H 1000 mm Transport dimensions approx. 4400 x 1300 H 1300 mm technical data under reserve

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. 6.000 mm Gsdpfx Agjhvrz Tjbjtt

Condition: new, Year of construction: 2025, saw band length: 7,000 mm, saw band width: 54 mm, cutting speed: 100 mm/min, cutting width (max.): 750 mm, cutting height (max.): 550 mm, warranty duration: 24 months, power: 5.5 kW (7.48 HP), “STANDARD FEATURES: • HYDRAULIC VICE • VARIABLE SPEED CONTROL (INVERTER) • PLC CONTROLLED SCREEN • SAFETY SWITCHES • HYDRAULIC STRIP TENSIONING • DOUBLE VICE • SERVO MOTOR MATERIAL FEED • ADJUSTABLE HEAD DOWN SYSTEM • TIMABLE CHIP CONVEYOR • 1 SAW BLADE • 2 MATERIAL CARRYING TABLES • 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY • COUNTRY OF ORIGIN: TURKEY • MODELS PRODUCED BETWEEN 220 MM DIAMETER – 3000 MM DIAMETER TECHNICAL FEATURES : SAW BLADE DIMENSIONS 54x1.3x7000 mm SAW SPEED 20 – 100 M/MIN MAIN MOTOR 5.5 KW SERVO MOTOR 2.2 kW HYDRAULIC MOTOR 1.1 kW COOLANT PUMP 0.09 KW VOLTAGE 3X380 V FREQUENCY 50 HZ HYDRAULIC OIL CAPACITY 26 LT COOLANT WATER CAPACITY 105 LT CUTTING HEIGHT 850MM MACHINE DIMENSIONS 2092x3404x2115 mm Gedpfx Ajvyywqogbett WEIGHT 3200 KG AT THAT DEGREE 550X750 MM

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm Gtjdji Ezwmepfx Agbet module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Gjdpew I Dpqsfx Agbstt

Condition: ready for operation (used), Technical characteristics CNC motorized vertical tilt 22.5-30° external and 90° internal CNC motorized movement of THK sliding head Intermediate workpiece support Blade diameter : 500 mm 2 x 2.2 kW motors, 2800 RPM Minimum cutting length at 90° : 225 mm Minimum cutting length at 22° : 310 mm Maximum cutting length : 5000 mm Mobile control panel Sawing speed (peripheral blade speed) : 66 m/s (with 450 mm blade) and 74 m/s (with 500 mm blade) Carriage translation speed : 20 m/min Power and Motors Gtsdpfx Aoundf Rogbet Voltage: 400 V Pluging: Three-phased Power: 5,3 Kw Motor: 2 x 3 CV Overall dimensions Weight: 1400 Kg

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Gtedpfjwfg Hbox Agbst

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Gjdpfxotuvg Do Agbjtt

Condition: new, Year of construction: 2022, functionality: fully functional, Brand New Friulmac EQ 004 2.5 with feeding belt and a feeding hopper Touch-Screen Operation and automatic adjustment Working length - min 190mm - max 2500mm width - min 30mm - max 250mm thickness - min 12mm - max 35mm Gedpfx Agevupm Dsbjtt Speed - 6 - 25m/min 2 x 2 Hoger - 3kW - 720 rpm Main Profiling Head - 4kW - 7200 rpm For more information I can send you the original documentation

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 380 mm, overall weight: 560 kg, Minimum cutting length at 90°: 520 mm Minimum cutting length at 45° (swiveled): 520 mm Locking positions at 15°, 30°, and 45° Swivel range continuously adjustable from 0° to 45° Hydropneumatic saw feed Saw blade diameter: 380 mm Gjdpfsw Ng Rgjx Agbjtt Saw blade speed: 2,800 rpm Voltage: 230/400 V, 3~, 50 Hz Output per motor: 3 kW Compressed air connection: 7 bar Version: 3 m

Condition: ready for operation (used), Brand: Rüco Tech info: Max distance between blades: 1830 mm Stroke length: 1600 mm Gsdpfjm Sghxsx Agbstt Max saw height: 70 mm Blade diameter: 350 mm With pneumatic material pressure unit Engine power of each engine: 2.2 kW Power: 50 Hz, 380V, 3-phase Stock no: 2001575BXA

Condition: ready for operation (used), Technical characteristics Gjdpfx Agsuciq Tsbott Distance between blades: 225 to 2800 mm Minimum distance between blades at 45°: 385 mm Cutting capacity at 90°: 140 mm Cutting capacity at 45°: 102 mm Max. cutting height: 90 mm Blade diameter: 300 mm Suction: 2 x 80 mm Pneumatic clamping system Simultaneous blade lowering Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5 Kw Motor: 2 x 3 CV Overall dimensions Lenght: 4000 mm Width: 650 mm Height: 1400 mm Weight: 800 Kg

Condition: ready for operation (used), Technical characteristics cut of MDF WOOD and PVC molding at 45 ° double horizontal blades inside rake angle Largeur de coupe130 mm Hauteur de coupe100 mm Gtodpfxjuaihme Agbet Diamètre lame300 mm Power and Motors Overall dimensions Lenght: 1400 mm Width: 1600 mm Weight: 500 Kg

Condition: ready for operation (used), Technical characteristics Electric head spacing with programmer Adjustable heads 5 drilling units Pneumatic clamping 4 hp saw motors, 400 mm blades 3-hp drilling motors + scoring unit Steerable drilling unit Gtsdpfsub Etnsx Agbjt Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Blade Ø 550 mm Useful length : 5000 mm Mobile head with motorized movement and electronic management of angles and length Double inclination of the two heads at 45° (internal) and 15° (external) Automatic and semi-automatic cutting with cutting list and intermediate angles PC control panel WINDOWS XP and 10 inches screen Horizontal and vertical pneumatic presses Integral protection Power and Motors Pluging: Three-phased Gjdpfx Asundgbsgbjtt Power: 3 Kw Overall dimensions Lenght: 6600 mm Width: 1900 mm Height: 1830 mm Weight: 2000 Kg