Used Double End Trim Saw for sale (41,483)

Condition: used, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, type of input current: three-phase, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW Dcjdjw H R R Hopfx Af Isn – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Dedpfxewfg Hbo Af Iecn

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Dedpskfvhkofx Af Ijcn Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Ex University Machine Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Positional Accuracy + - 0.015mm Traverse Speeds 15m/min Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Dodpfx Afjw Rg Saj Iecn Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1992, condition: used, Double-head saw ELUMATEC - model DG 142 - year 1992 - blades 500 mm Dedpfepcgz Djx Af Iscn

Condition: reconditioned (used), Cross cut saw 9 meter with 4 heads. Very good condition. Dodsvb I S Ejpfx Af Iscn

Condition: used, - 2250 mm Cutting width Djdpfshkm A Nex Af Iocn - 80 mm cutting height - 2x 3,7 KW saw motors

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: C123969, saw blade diameter: 500 mm, rotational speed (max.): 2,820 rpm, overall weight: 1,490 kg, tilt adjustment saw blade: 22° - 90°, TECHNICAL DETAILS Speed: 2,820 rpm Number of saw blades: 2 Saw blade diameter: 450 & 500 mm Dodpfxow Nvxyj Af Iecn Mitre angle: 22° - 90° Motor Blade motor power: 2.2 kW MACHINE DETAILS Weight: 1,490 kg Motor Blade motor power: 2.2 kW Electrical data Power: 5.3 kW Current: 13 A Voltage: 400/3 V Frequency: 50 Hz Note: The machine will be available from 01.12.

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Dedpfx Afjkfp D Te Ijcn Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 380 mm, overall weight: 560 kg, Minimum cutting length at 90°: 520 mm Minimum cutting length at 45° (swiveled): 520 mm Locking positions at 15°, 30°, and 45° Swivel range continuously adjustable from 0° to 45° Hydropneumatic saw feed Saw blade diameter: 380 mm Dedpfow Ng Rgex Af Ijcn Saw blade speed: 2,800 rpm Voltage: 230/400 V, 3~, 50 Hz Output per motor: 3 kW Compressed air connection: 7 bar Version: 3 m

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: Djdpjvyidmsfx Af Ijcn • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Dsdpfjw D Dfxox Af Ijcn Further data: See PDF

Year of construction: 1998, condition: used, functionality: fully functional, Rapid dgl the saw blades automatically adjust to the desired dimension, control via touch panel, Dcedpfx Asw I Hz Asf Ien blade diameter 500 mm rotation speed 2710 cutting angle 45-90° cutting length approx. 3000 mm pneumatic clamping air requirement 200 NI the saw is in excellent condition, ready for immediate use, testing possible, invoice issued

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very Dcedpevwgnwofx Af Isn little use.

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Dcodow I Dpqopfx Af Ien

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter Djdpfx Afsg Db U Ao Iscn disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, saw drive: 31,000 W, total length: 17,000 mm, total height: 1,000 mm, height adjustment type: mechanical, total width: 2,500 mm, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Please contact us if you are interested or have any questions. Djdpfx Ajwa T Dcsf Iscn

Condition: used, Year of construction: 2006, operating hours: 1,500 h, functionality: unexamined, machine/vehicle number: 0799335115, cutting length (max.): 4,500 mm, The machine was purchased used and never used. It's in good condition. Dcedpfx Afjwir D To Ion

Condition: excellent (used), functionality: fully functional, OMS double mitre saw for wood and aluminium Djdpsw Htxtjfx Af Iecn Specification: • Condition – used, after inspection • Manufacturer – OMS • Main motors – 2 x 2.5 HP • Pneumatic head control • Max cutting length – 351 cm • Min cutting length – 34 cm • Max cutting cross-section – 110x150 mm (at right angle) • Max blade diameter – 300 mm • Extraction ports, diameter 60 mm • Mitre cutting from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 800 kg • Overall dimensions – 412 x 85 x 130 cm (L x W x H) Additional information: • Very good original technical condition • The attached photos show the actual condition of the machine • Possibility to connect and inspect the device on site

Condition: good (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Numerical Control Power Control 22, Software WoodCommander (Windows) Safety and sound-proof enclosure No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 155 Max. useful working width (mm) 2500 Min. useful working tickness (mm) 12 Max. useful working tickness (mm) 60 Max. depth of the panel for automatic infeed (mm) 1200 Distance between center-axes of the disappearing dogs (mm) 500 Adjustable (min/max) feeding speed (m/min) 10 - 30 No. 4 Working groups (for each machine's side): 1 Vertical milling Unit (Anti-chipping) 1 x Kw 4,5 Dcodpfedh Tfkjx Af Ion 2 Hogging Units (KD 11) 2 x Kw 6,6 1 Fine trimming unit (0°-25°) 2 x Kw 0,4

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland Djdsq Ii Dlspfx Af Iocn TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Dcedpfxewhmdfo Af Ien Max. useful working tickness (mm) 150 Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production Dedpfxoi Ezwmj Af Iocn TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer Dedpfx Ajgz Alxof Iecn With separate electric and command panel Safety and sound-proof enclosure No. 1 Vertical column to support the working units Min. useful working width (mm) 220 Max. useful working width (mm) 3000 Min. useful working tickness (mm) 6 Max. useful working tickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 40 No. 3 Working groups (for each machine's side): 1 Jumping Scoring Unit Kw 2,2 / Kw 3,2 1 Hogging Unit Kw 5,5 / Kw 7,3 (RPM 3000 / 6000) 1 Jumping Milling Unit Kw 4 / Kw 5,8 (RPM 3000 / 6000)

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Dsdpfxjh Nx U Nj Af Iecn Numerical Control ( CNC) NC 21, Software Homatic Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) Max. useful working width (mm) 3000 Max. useful working tickness (mm) 100 (ca.) Max. depth of the panel (mm) for automatic infeed 1250 Distance between center-axes of the disappearing dogs (mm) 1000 Adjustable (min/max) feeding speed (m/min) 8 - 25 (ca.) No. 4 Working groups (for each machine's side): 1 Jumping Scoring Unit (1 x Kw 1,5 ca.) 1 Hogging Unit (1 x Kw 4,5 ca.) 1 Jumping Milling Unit (1 x Kw 4,5 ca.) 1 Free Space