Used Double End Miter Saw for sale (40,952)

Condition: used, DOUBLE SIDED CUTTING SAW WITH FIXED BLADE TO CUT AT 90° - Manual carriage feeding - Blades diam. 300 mm. Itjdpernkmwsfx Afijn - Max. working lenght mm. 2000 - Electric blade movement

Year of construction: 1990, condition: used, machine/vehicle number: 102-014-3150, disk of circular saw-Ø: 400 mm Ijdpfodbp Eqex Afijtn cutting area at 90° round: 130 mm cutting area at 90° square: 210 x 80 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 160 x 80 mm cutting speed: 11/22 m/min space needed: 2650 x 1450 x 1980 mm weight: ca. 1100 kg

Condition: excellent (used), Omga V113P Double Mitre Saw for Frames Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each 1.1 kW Maximum cutting width: 70 mm Maximum cutting height: 75 mm Itedpsw T Rpzsfx Afien Pneumatic material clamps Extended table on the right side

Condition: good (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 100 mm, cutting length (max.): 2,500 mm, saw blade diameter: 400 mm, Double cross-cut saw EIMA type 131 with 3 saw blades, electrically adjustable Iedewnfc Hopfx Afietn

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm Iedpewz Hygjfx Afijtn cutting lenght max.: 6000 mm max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: good (used), overall weight: 580 kg, Equipment: documentation/manual, About the item WALTER FD2/250 – Double Saw Formatting Machine Wide chain spacing (cutting width from 116 cm to 130 cm) Itjdpfx Aew Ucwaofijn Comes with technical documentation (DTR). Two new 400 mm saw blades included for free. GOOD CONDITION NET PRICE

Condition: used, Year of construction: 1996, machine/vehicle number: 96T233, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - Tilting blades 45° - N. 2 motors 1.1 kw - Blade diam. 330 mm Itedpfx Ajqmpl Aefijn - V. 380/50 - S/N 96T233 - Year 1996

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW Isdjcu Dvuspfx Afistn space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg

Year of construction: 2006, condition: ready for operation (used), Smallest cutting length at 90°: 350mm, smallest cutting length at 45° inclined: 350mm, swiveling range inward: 90-45° (down to 22.5° manually with digital display), tilting range inward pneumatically: 90-45°, saw blade diameter: 420mm, saw blade speed: 2800/min, electrical connection: 230/400, power output per motor: 4kW, compressed air connection: 7bar, air consumption per working cycle: 40l without spraying, 64l with spraying, length: 4380mm, width: 2871mm, height: 1985mm. With complete documentation, without accessories. An on-site inspection is possible, but not under power. The machine is already dismantled and ready for loading. No defects known, was regularly maintained by the manufacturer. Ijdpfx Afow Tc Sheistn

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, Itodpfsw Tc Hrsx Afien - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size.

Condition: like new (used), Year of construction: 2016, operating hours: 22 h, functionality: fully functional, saw blade diameter: 500 mm, Elumatec Double Mitre Saw DG 142 with E580/1 Control – Precision Saw for Aluminium and PVC Profiles For sale is a high-quality Elumatec DG 142 double mitre saw equipped with electronic control system E580/1. This machine is ideal for the precise cutting of aluminium, PVC, and light metal profiles – particularly suited for window, door, and façade construction. Technical specifications: Manufacturer: Elumatec Model: DG 142 Control: E580/1 (automatic positioning and angle adjustment) Mitre cuts: 45° – 90° (automatically adjustable) Cutting length: up to approx. 5,000 mm (depending on configuration) Blade diameter: approx. 500 mm Speed: approx. 2,800 rpm Connection: 400 V / three-phase Condition: used, technically flawless Availability: immediate +++ Operating hours: 22 HRS +++ Special features: - Automatic positioning of both saw units - Precise and clean cuts thanks to stable machine guidance - Programmable control for highly repeatable series cuts Itedpfxow D Rv Ds Afion - Excellent cutting quality, also on demanding profiles - Ideal for metal fabrication, window production, and conservatory construction The machine is network-capable incl. extraction unit + SICK light curtain

Year of construction: 2000, condition: good (used), Power: 5.5 kW Iedpjw S Nycsfx Afijtn Weight: 2,200 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 961227, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - N.2 motors 2 hp - N. 2 blades diam. 350 mm - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° Iodpfx Afsrnnrxjijtn - Volt. 380/50 - SN 961227 - Year 1996

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm Itodpfez E Snjx Afijn disk of circular saw-Ø: je nach Bedarf 420 - 500 mm space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Ijdpjw Svxlofx Afijtn Classic Magic 500 5 Meter Year built: 2019, as new condition - LCD display with backlighting - Pre-installed interface for industrial label printer connection - USB port - Capability for single cuts - Storage for 99 profile correction values and automatic calculation of cutting lengths for miter cuts - Storage for 20 cut lists entered via the keyboard (up to 50 sets each) - Storage for 10 cut lists imported via RS232 serial interface from an external PC (up to 100 sets each) MACHINE FEATURES - Position detection of the movable unit via direct measuring system with magnetic tape - 2 carbide-tipped saw blades, diameter 500mm - Pneumatically operated full safety covers over the cutting area - 2 pneumatic horizontal clamping units with low-pressure safety device - Profile support roller conveyor - Lubrication system: mist spray or minimum quantity pulse spray system (depending on version) - Cuts with saw blades Ø 500 mm in the miter range from 22°30’ (external) to 90° - Manual profile support - Pre-installed interface for automatic activation of MG4 chip extraction unit - Two standard profile inserts - Metric scale - Label printer incl. label peel-off function - Overlength cut - Shortcut - Cross cut - Macro - Automatic cut - Pro software package

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 2 kW (2.72 HP), MAX cutting depth: 200 mm Chain width: 400 mm MAX distance between exterior blades: 380 mm Itedpetvpfmsfx Afion Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft Ijdpfx Afodzp Snjiotn - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: used, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, type of input current: three-phase, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers Itedpfx Ajw H R R Hefijn – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 220992, SECOND HAND END CUTTING SAW WITH ELECTRONIC PUSH FEED STROMAB MOD. TR500 MATRIX - CE RULES - infeed with roller table and electronic push feed MATRIX of 6000mm - Outfeed roller table1500mm - 10 hp motor Iodpst U I A Hjfx Afiotn - Blade diameter: 500mm - Blade rotation speed: 3500 rpm - Maximum cutting capacity: 360mm (L) at 55mm (H), 200mm (L) at 135mm (H) - Minimum cutting section: 20mm (L) x 10mm (H) - ELCO numerical control - 415 volts - Serial number: 220992 - Year 2002

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm - outfeed roller table of 4500mm - blade diameter: 500mm Itjdpfxjt U Izpj Afijn - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor - 415 volts - serial number: 1377 - year 2007

Condition: used, SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 - volt. 380/50 - s/n 2401011 Itodpfeiux Izjx Afien - ce rules

Condition: used, SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI TTSA Itjdpfx Afewrh N Deion - Automatic loader - Control panel - Min / max working length 240/1200 mm - Maximum tenon size 100x30 mm - Production: 1200 tenons/hour (600 pieces/hour) - Tool rotation 9,000 rpm - Total installed power 9 kw

Condition: used, Year of construction: 2003, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) Ijdsmxktpopfx Afijtn - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF - Volt. 380/50 - S/N 772 - Year 2003

Year of construction: 2004, condition: ready for operation (used), SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - touch screen NC control - with loader CSF - safety net - S/N 800 - CE rules (year 2004) - RECONDITIONED Ijdpfx Afjinbk Roijtn

Condition: used, Year of construction: 1996, machine/vehicle number: 518, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES Isdernnmpepfx Afijtn - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF2 - Nc ISAC - Perimetral net - Volt. 380/50 - Year 1996