Double-End TENONER - SCM

CELASCHI (SCM Group) Celaschi P 30

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization Gsdpfsidi Ivsx Agfsua

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Guodsdnxydepfx Agfea Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: excellent (used), Year of construction: 2018, working size (mm) 400X300mm Distance from saw blade to worktable (mm) 3~200mm Conveyor belt width (mm) 385mm Saw wheel power (kw) 18.5kw Saw unit sprocket diameter (mm) 711mm Feeding speed (m/min) 0~12m/min Guedpfji Ay Hqex Agfea Hydraulic pressure (kg/cm²) 55kg/cm² Dust outlet diameter 102mmX2 Blade size (L x W x H) (mm) 4572 x 27 x 0.9mm Saw Gap (mm) 1.5~1.8mm Overall dimensions (LxWxH) (mm) 3000x2250x2000 Net weight (kg) 2100kg

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t Gujdpsf Sqcksfx Agfsa 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! Gedpfxswmw Nvo Agfeua 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Gusdpfx Aowp Rqfsgfea Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 Gujdpfx Ager A Et Tefsa 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) Gusdjilqvrepfx Agfja - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET Gjdpfxedvlcye Agfjua SECOND-HAND, FULLY RECONDITIONED

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Technical Specifications: Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Max. operating temperature: 180 degrees Celsius Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Gujdpfx Agsv Np H Hofoa Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8