Used Double End Miter Saw for sale (21,649)

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° Djdpfxswn Dy Dj Ailocn - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6858, Jumberca MIL model double-sided circular knitting machine, machine number 6858, year 2000. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). CE marked. NAMEPLATE DATA: · Diameter: 33 inches · Gauge: GG 18 · Number of needles: 1860 + 1860 · Maximum speed: 20 rpm · Power: 8.4 kW · Voltage: 380 V · Frequency: 50-60 Hz · Maximum air pressure: 6 bar · Weight: 2,890 kg · CE marking APPLICATION: Large-diameter double-sided knitted fabric: interlock, rib, fabrics for mattresses and home textiles. INSTALLED EQUIPMENT: · Control cabinet with start/stop buttons · Electronic lubricator Memminger-IRO Pulsonic 5.2, with oil · Upper fillet POWER SUPPLY: 50-60 Hz. The nameplate indicates 50-60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. CONDITION: Complete and assembled machine. An on-site inspection and operational test can be arranged. Dodpfjzvhzxsx Ailocn DIMENSIONS AND TRANSPORT: · Weight according to nameplate: 2,890 kg · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain.

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm maximum diameter of the cut shaft 350mm shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW Dcjdpfx Aijwmg Saslon power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) Dcedpfxoy Encws Ailen - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, maximum distance between units: 3.3 m two motors, 2.2 kW each blade tilt adjustable cutting angle in the range of -45/+45 degrees Dcedpjzxpr Djfx Ailjn maximum blade diameter: 330 mm pneumatic clamping devices blade speed: 3765 rpm CE marking

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hydraulic feed brake Pneumatic material clamping system, on both sides from above Dodpfozu Azdjx Ailecn Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Crosscut fence for cutting angled pieces Machine stand

Condition: new, Year of construction: 2026, machine/vehicle number: K00627, functionality: fully functional, operating hours: 2 h, power: 1.8 kW (2.45 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 240 mm, cutting width (max.): 450 mm, control type: manual, pivoting range: 45,060 °, actuation type: manual, total height: 1,300 mm, total length: 2,000 mm, total width: 850 mm, Equipment: CE marking, documentation/manual, The S 320 DG from Sägemaschinenfabrik Bauer GmbH is a powerful double-miter band saw designed for demanding applications in metal construction, mechanical engineering, steel construction, as well as in locksmith shops and manufacturing companies. Thanks to its robust industrial design, high cutting accuracy, and well-thought-out construction, it is ideally suited for economical and precise cutting operations in daily continuous use. Dodpfx Aijzqdmmelecn With a generous cutting capacity of Ø 320 mm for round stock or 450 x 230 mm at 90°, the S 320 DG offers high flexibility for a wide range of workpieces and material cross-sections. Miter cuts from 45° to the left to 60° to the right enable versatile applications in the cutting of profiles, pipes, and solid materials.

Condition: used, Year of construction: 1968, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, saw blade bore: 32 mm, Equipment: documentation/manual, saw blade guard, - Saw blade arbor, 32 mm diameter - Two cutting speeds (1050 and 2100 rpm) => The saw can be used for both wood and plastic processing thanks to the two cutting speeds and the corresponding saw blades Dcjdpfx Aiez E S Ncjlon - Locking possible at 45 or 90 degrees; cuts between these locking positions are also possible - 380 V electrical connection - Sold without saw blades - Includes operating manual

Condition: used, Bacci Morta-saw machine with 2 benches and 2 tips Overall dimensions: cm. 145 x 100 h. 140 Dcedpfx Aszg Hz Soilon Approximate weight: Kg. 700

Condition: used, Technical specifications: Dodpfx Aiezht Tqelocn Maximum saw blade diameter: 300 mm Maximum cutting width with two blades: 2700 mm Minimum cutting width with two blades: 250 mm Capability for angled cutting Motor power: 2 x 2.2 kW Power supply: 380 V Dimensions: Height: 1300 mm Length: 3600 mm Width: 1000 mm

Condition: ready for operation (used), Year of construction: 2011, Omga Double Mitre Saw TR2A NC with semi-automatic operating cycle and pneumatic control Motor power: 2.2 kW per unit Total power: 5.02 kW Workpiece dimensions for straight cuts Height: 80 mm or 90 mm Depth: 145 mm or 132 mm Workpiece dimensions at 45° Height: 80 mm or 90 mm Dodpfx Asy Sinzeilecn Depth: 102 mm or 93 mm Min. length straight: 225 mm Min. length 45°: 385 mm Max. length: 2800 mm Saw blade diameter: 300 mm Motor speed: 3000 rpm Space requirement: 3830 x 1100 x 1600 mm

Condition: used, Year of construction: 2003, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) Djdpfjmxktpjx Ailecn - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF - Volt. 380/50 - S/N 772 - Year 2003

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 2022/5/18, functionality: fully functional, Saw blade I, diameter/bore: 550 mm/50 mm Motor: 3 kW; 400 V; 2800 rpm Saw blade II, diameter/bore: 350 mm/40 mm Max. workpiece dimensions: 210 x 100 mm Motor: 2 kW; 400 V; 2800 rpm Vertical cutting height: 150 mm Dcsdpjzwqu Rsfx Ailen Swivel range of saw blade I: -70°/90°/45° Feed: Pneumatic, controlled by a two-hand system Air connection: 8 bar Operating manual: Available Dimensions (width x depth x height): 1200 x 1000 x 1400 mm Weight: 480 kg

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, Torwegge Double End Tenoner H 613 E – Year 1991 – Excellent Condition – Extensive Tooling Included Dcedpfxjywfirj Ailjn For sale is a high-quality Torwegge Double End Tenoner, Type H 613 E, manufactured in 1991, and made in Germany to the highest quality standards. The machine is in exceptionally well-maintained technical and visual condition and has been regularly serviced and professionally maintained throughout its operating life. It was reliably used in industrial woodworking until recently and is ready for immediate operation. Another significant advantage is the modernized electrical system: The complete control cabinet was completely renewed approximately four years ago by Robust Maschinenbau, resulting in a modern and reliable electrical system. The scope of delivery includes an extensive set of tools, numerous spare parts, and all original documents, operating manuals, and technical documentation. Technical data Manufacturer: Torwegge Holztechnik GmbH & Co. KG Type: H 613 E Year: 1991 Machine number: 394 Operating voltage: 380 V Frequency: 50 Hz Connected power: 30 kW Main fuse: 100 A Scope of delivery Torwegge Double End Tenoner H 613 E Extensive set of tools Various spare parts All machine documents and documentation Completely renewed control cabinet (approx. 4 years ago) The machine can be inspected, demonstrated under power, and thoroughly tested at any time by prior appointment. A forklift is available for loading the machine. If you have any questions or would like to arrange a viewing, please do not hesitate to contact us.

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile Dcjdopcmthspfx Ailen -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Condition: used, Double-Head Mitre Saw for Aluminium Profiles – Pertici Univer 403 P Main Features Double-head mitre saw for aluminium profiles Numerical control for managing cutting dimensions Cutting heads with rotation and tilting functions Automatic positioning of the movable head Pneumatic profile clamping system Suitable for aluminium window and door manufacturing Maximum cutting length: 3,200 / 3,300 mm Technical Data Blade diameter: Ø 400 mm Blade bore: Ø 30 mm Blade speed: 3,180 rpm Installed power: 3.1 kW Power supply: 380 V three-phase – 50 Hz Current consumption: 6.2 A Dsdpfx Aezb Ehnoilecn Operating pressure: 6.3 bar Air consumption: 13.9 Nl/cycle Weight: 370 kg Applications Aluminium window and door manufacturing Doors and windows Curtain wall systems Light metal fabrication and construction work

Year of construction: 2008, condition: excellent (used), Miter Saw - Cutting Center STROMAB model CT 800 Year 2008 Dcjdpfx Aiokzhffsljn

Condition: used, Technical specifications: Max. blade diameter: 300 mm Dedpfx Aijzht Saoljcn Cutting range: 45° Pneumatic clamping Blade guard Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 1.5 kW

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - cutting height 30-200mm - max. saw blade diameter 350mm - spindle diameter 70mm - max. width of wood being cut 500mm - working width of the shaft with saw blades 400mm - minimum length of wood being cut 1000mm *from above: - anti-kickback devices - 4 toothed feed shafts – pneumatically pressed *from below: - sliding roller - anti-kickback devices - 2 toothed feed shafts - shafts with saw blades Dsdpfx Aszw Duwsilecn - 2 toothed feed shafts - stepless speed adjustment on an inverter - feed motor 3kW - main motors 2x55kW - diameter of dust extraction nozzle 250mm - machine dimensions L/W/H 2150x1880x1800mm - machine weight approximately 3500kg ADVANTAGES – Polish production – twin-shaft multi-blade saw 2x55kW – original DTR documentation + CE – used multi-blade saw, very good condition Net price: 88900 PLN Net price: 20700 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Dcedewfg Hbjpfx Ailjn

Condition: not inspected (used), Maximum working length: 1500 mm Tilting capacity of heads: from −10∘ to +45∘ Swivelling capacity of heads: from −10∘ to +90∘ Motor power, machining unit: 2×2.25 kW (3 HP) Dedpsxz Um Sofx Ailscn Motor power, drilling unit: 2×2.25 kW (3 HP) Longitudinal movement motor power: 1×2.25 kW (3 HP) Saw blade diameter: 400 mm Saw/drill rotational speed: approx. 3000 rpm CONDITION UNKNOWN – NOT TESTED

Condition: new, mm Working height bei 90° = 315 mm Dedpfx Aijy I Dcfolocn 0 45°/90°/45° 0 weight 2050 kg Cutting height at 45° 230 mm

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic optimising end cutting saw PAUL 11 MKL MAXI 5 Premium Year 2006 Input table automatic (throughfeed system) Outut table automatic Dcsdpszraaxsfx Ailon 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: good (used), Year of construction: 1998, Cutting length 6000 mm Dcjdpfx Aieyz Il Relen Saw blade diameter 500 mm Mitre cuts swivelled from 22.5° outward to 45° inward Two-hand operation with intermittent spray device

Condition: excellent (used), Year of construction: 1980, 1 x AUTOMATIC DOUBLE END TENONER SPANEVELLO Model STDL with 3 + 3 spindles TECHNICAL DATA: - Working width: 170 – 3000 mm - Workpiece thickness: 5 – 120 mm - Top pressure beams with drive belts and clutch - Bottom feed chains, 70 mm width - Automatic lubrication of bedplates - Automatic lubrication of feed chains - Dogs distance: 340 mm - Variable feed speed: 1.5 – 20 m/min - Power supply: 380V / 3ph / 50 Hz MACHINE EQUIPPED WITH: - Left-hand adjustable infeed side fence – manual horizontal adjustment Jump Cutting/Scoring Units 1-2: - Motors: 1.5 HP – 3000 RPM - Shaft diameter: 35 mm x 55 mm length – Max. tool diameter: 200 mm Hogging/Milling Units 3-4: - Motors: 5 HP – 3000 RPM - Shaft diameter: 40 mm x 55 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 140 mm - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout Dcedpfxjyurqpe Ailsn Milling Units 5-6: - Motors: 5 HP – 3000 RPM - Tiltable 0–90° - Manual vertical/horizontal adjustment with readout - Shaft diameter: 40 mm x 95 mm length – Max. tool diameter: 250 mm - Dust extraction outlet diameter: 120 mm Machine in good working condition. Tested in our workshop prior to delivery.