Used Dosage for sale (81)

Condition: new, Year of construction: 2025, Glue spreading machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) working width: 1.300 mm max. passage height: 100 mm speed: 18 m/min working height: 900 mm diameter of application rollers: 185 mm connected load: 0,5 Hp 0,37 KW operating side: right Bljdpfx Absd Iz Dfj Ter Electricity: 400 V/ 50 Hz/ 3 phases Technical equipment: - Structure of the glue spreader made of welded sheet metal. - 1 motor for driving the two rollers - Glue spreader rollers covered with acid-resistant special rubber, form-ground and grooved, wear-resistant. - The thickness of the rubber layer can be shape ground several times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to max. 5 mm on the workpieces. - Glue dosage by means of zinc sheet distribution tray. Easily extractable for cleaning. - 1 handwheel to adjust the opening of the rollers. - Accident prevention protection of the rollers - Electrical components according to the highest quality standard - CE standard

Condition: good (used), Year of construction: 2010, Arburg 570 H 2000-400 (2010) Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin Bjdpfjwpkfcsx Ab Tolr AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Position-regulated screw

Condition: used, Year of construction: 2006, Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph This Monoblock  offers a bottling unit manufactured by Bertolaso in 2006. Although designed to operate at a maximum speed of 2000 bottles per hour (BPH), operators have never used it, leaving it in very good condition. Furthermore, the Olimpia 12/12/1 monoblock efficiently handles glass containers, allowing for both 0.75 and 1.5-liter formats, and performs especially well for bottling still wine and beer. Rinsing System of the Used Filling Monoblock OLIMPIA 12/12/1 The Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph achieves rinsing through a gripper system equipped with 12 clamps for glass containers. In fact, this system ensures uniform container cleaning before filling. Moreover, its single-type treatment prepares containers efficiently, maintaining the final product’s integrity. This configuration controls the rinsing flow stably, achieving efficiency even in high-intensity work environments. Filling Technology: Gravity Valves with Light Depression The Monoblock BERTOLASO integrates 12 valves that fill containers using gravity, supported by light depression, ensuring precise liquid dosage. Consequently, this method minimizes air presence in the container, which helps preserve product quality and increases storage stability for wine and beer. Blodpfx Aovgvfkob Tsr Fixed Nozzles for Consistent Filling Additionally, the fixed nozzles of the Filling Monoblock BERTOLASO maintain stable, continuous filling, ensuring homogeneous liquid distribution in containers. As a result, this design enables the monoblock to handle high volumes efficiently, therefore reducing product waste and optimizing production processes. Operational Condition and Storage State The Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph remains in storage, having never been activated. Thus, this storage state keeps all components in pristine condition, so they are ready for immediate operation. Therefore, it serves as an ideal solution for those seeking a ready-to-use bottling monoblock without wear or restoration requirements. Production Advantages of the Used Filling Monoblock OLIMPIA 12/12/1 The Monoblock BERTOLASO adapts especially well to production lines requiring flexibility for different container formats and bottled products. In particular, its ability to manage various container sizes (0.75 L and 1.5 L) expands its applications, making it a versatile choice. Finally, the machine’s overall design enhances efficiency, ensuring high performance during production runs.

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. * Adjustable speed control up to 200 rpm. Blsdpfx Aeh Nnbcob Tor * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Bledpfx Abjxgrfpj Tsr Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: like new (used), Working width 1400 mm Blsdpfexur I Tjx Ab Tjr Cleaning brushes with automatic feed Glue dosage adjustment Emergency stop switch 380 V Year of manufacture 1998

Condition: good (used), Winterhalter GS 502 Basket Pass-Through Dishwasher The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. You benefit from a comprehensive hygiene concept with a deep-drawn tank, surface heating elements, and a sieve system. Thanks to its powerful cleaning action, Winterhalter guarantees hygienically clean results, even with heavy soiling. The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. You benefit from a consistent hygiene concept with a deep-drawn tank, surface heating elements, and a sieve system. Thanks to its powerful cleaning action, Winterhalter guarantees hygienically clean washing results, even with heavily soiled items. The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. Technical Data: Theoretical output: 60 baskets per hour Dimensions (width x depth x height): 635 x 749 x 1469 (hood open 1932) mm Infeed height: 420 ± 5 mm Working height: 850 mm Basket dimensions: 500 x 500 mm Tank capacity: 42 l Rinse water consumption per cycle: 2.4 l Tank temperature: 60°C Boiler temperature: 85°C Required water pressure: 1 bar Total connected load with hot water connection > 40°C: 9.5 kW Total connected load with hot water connection < 40°C: 15.5 kW Standard features of the Winterhalter GS 502: One-button operation with color coding Integrated rinse aid dispenser (including suction lance) Built-in special detergent dispenser Bledpfx Abjxuq Aij Tsr Covered heating element Drain pump Hygiene features: 4-stage lye filtration (filter cassette, pump filter, surface filter, Mediamat), self-cleaning program. The boiler has a thermal cut-out to ensure the required rinse temperature. Program starts by closing the cover Double-walled cover Display panels (e.g., for dosage, water treatment, etc.) Spray water protection IPX5 Connection cable 400V3N ~, 50 Hz Inlet and outlet hoses Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2006, operating hours: 73,000 h, functionality: not functional, clamping force: 500 kN, screw diameter: 30 mm, injection weight: 77 g, Arburg 320C 500-170 Year of manufacture: 09/2006 Injection unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 50 t Bjdpfsxt Uyvjx Ab Tslr Tie bar spacing: 320x320 mm Platen dimensions: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Injection unit hardened - Bimetal Dimensions: Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pump/Motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW The machine is supplied without a nozzle and requires repair of a card.

Year of construction: 2002, condition: used, Technical details: control: Soft - PLC burner heads: 1 Stück Distance between centres: ca. 4000 mm Rotary-table: Ø 890 mm Rotary-table: drehbar 360° mm Rotary-table: schwenkbar: 130° mm electrics - voltage/frequency: 3x400 V / 50 Hz V/Hz total power requirement: ca. 22 kVA weight of the machine ca.: 5,0 t dimensions L x W x H: 5,7 x 2,4 x 2,8 m dimensions electric cabinet: 1600 x 640 x 1500 mm PTA-welding, Plasma coating system Plasmabeschichtungsanlage mit 8-Achsen Performance: Coating of sealing plates, seat rings, cones, tapered spindles and other wear parts. Powder dosing system: -control process control system / adjustment of the powder quantity -Powder quantity approx. 10kg, powder grain size 25µ - 500µ -Quantity regulation of the powder dosage Current source: -control MOSFET; rangePilot max. 200A and Tranfer 300A -digital display -air cooled -control 0-10V / 0-20mA Plasma torch: -water cooled -continuous power P max. pilot 100A and transfer 300A High frequency ignition unit: -HF generator for arc ignition Blodeu Nwf Ispfx Ab Tor Gas control system: -process controlled for fully automatic flow. -plasma gas system flow unit electrically controllable -gas = Argon 99.99 pure gas -flow rate plasma gas system 0,05 - 5 l/min.; powder gas system 0,50 - 20 l/min.; protective gas system 1,50 - 30 l/min. Support stand with moving tip Water cooling unit Control panel Housing *

Year of construction: 2025, condition: new, Dosage ranges: 1 ml - 38 ml Blodpfx Abowprv Ns Tor 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml 1 filling station Plastic bottles or glass bottles “Anti-drop” device if possible Filling nozzles and pumps made of stainless steel AISI 316 Bottle feed via slat conveyor belt Adjustable guides Volumetric filling of products / bottles Caps must be placed by hand Filling amount infinitely adjustable Very easy machine operation

Condition: like new (used), Year of construction: 2017, Nordson Durablue 4F hotmelt glue unit suitable for up to 6 hose connections. This unit is equipped with a gear pump, unlike a (double-acting) plunger pump, this has no so-called dead stroke. This makes the unit very suitable for constant glue assignments where an even glue dosage is important. Bjdpfx Abovupz Ie Telr The glue unit has been completely cleaned internally and externally by us, tested and is fully functional.

Condition: used, mileage: 230,120 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, maximum load weight: 575 kg, first registration: 05/2019, loading space length: 3,730 mm, loading space width: 2,070 mm, loading space height: 2,170 mm, loading space volume: 16 m³, color: white, Allowable total weight: 3500kg, Load compartment (L W H): 3,730 mm x 2,070 mm x 2,170 mm, Load compartment volume: 16 m³, C/T DOSAGE Blsdpstqwkyjfx Ab Tsr

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Bljdpfx Abjgq N Ezo Ter JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Bjdpfx Abjxlctbe Tolr Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Warranty: 12 months Transport Initial commissioning on site Training

Year of construction: 2023, condition: new, Dosing system serial doser for the production of mineral mixtures, FSS, STS, KG 1/2 etc. semimobile unit, dosage, dosificación Bedpfx Absgpk E Ds Telr 4 chambers each about 22 m³, hourly output eff. 720 tons, , 900 recipes can be set, direct loading onto Trucks

Condition: used, Cleaning-in-place system for closed cleaning of process systems. Constructed from a rectangular container divided into 2 chambers. For each chamber, the tank is equipped with a removable lid and an outlet pipe with manual valve. With dosing pumps for acid, alkali and disinfectant as well as a centrifugal pump as a CIP feed pump. Additional title: with 2 rectangular chambers Length: 3,7 m Width: 0,5 m Bledpfsxbptmox Ab Ter Height: 1,5 m Weight: 300 kg Material: stainless steel Features: rectangular vessel with 2 chambers, outlets with manual valves, prerun pump, dosage pumps

Condition: used, operating hours: 500 h, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Bedpfevgud Sox Ab Tjlr Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: like new (used), Working width: 1300 mm Glue dosage adjustment Blsdpfxjxf Hvmj Ab Tjr Safety switch Manual element height adjustment

Condition: used, Non-returnable PET filling line, consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in 4x5 arrangement) - PET shredder (Strautmann BrikPress 240, year of construction 2019) - Crate washer with cleaning nozzles - Preform feeding device - Stretch blow-moulding machine (SIPA, type SFR 8 EVO, with 8 cavities) - Stretch blow-moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Premix system (Procomac Starmix, built in 2001, 200 hl/h) consisting of water deaeration, mixer and carbonisation with a total of 4 tanks and two cartridge filters for water treatment. - Velcorin dosage (dmt, Burdomat II G) - Capping task and cap conveying system - PET bottle rinser, filler and capper (Procomac) - Fill level control (Heuft Spectrum TX) with rejection - Labelling machine (P.E. Futura) for hotmelt labelling of wrap-around labels, in a block with dating (Videojet) - Crate packer (BMS) - Free, driven conveyor lines for bottles and crates Bodjw Uvd Tspfx Ab Tjlr Additional title: non-returnable PET filling Capacity: 16000 bo/h Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, shredder, preform feeder, 2 x stretch blow moulder, premixer, velcorindosage, cap feeding and conveying, rinser/filler/capper, fill level control, labeller, dating, packer, Free crate and bottle transport

Condition: used, operating hours: 2,001 h, Used Bottling Line for baby powder milk 18000 cphs The bottling line for baby powder milk at 18,000 cans per hour operates as a fully adutomated system that ensures high efficiency and precision. Each machine in this line optimizes production flow, reduces waste, and meets the strict quality standards required in the food sector Key features of the Used Bottling Line for baby powder milk 18000 cph Depalletization The process starts with the Jorgensen depalletizer (2000), an advsanced system that handles preformed cans. This machine integrates a Siemens S7 PLC and Danfoss frequency converters, enabling precise production flow management. Additionally, the system includes an empty pallet collection station and an infeed buffer for 5 pallets, which facilitate continuous processing without interruptions. Rinsing machine Next, the cans move through the air rinsing machine, which removes particles and impurities using a high-pressure compressed air jet. This process prevents contamination while maintaining optimal hygienic conditions before filling. As a result, the product remains safe and meets regulatory requirements. Scoop Placement machine in this bottling line for baby powder milk The scoop placement machine (Hoppmann, 2014) plays a critical role in ensuring the accuracy of scoop insertion. This machine, which has a capacity of 360 scoops per minute, features a high-capacity buffer hopper, dedicated conveyor belts, and an automated insertion unit. Consequently, it places scoops with exceptional precision in each can. Filling machine The powder filling machine (Mannesmann Dematic / Colby Powder Systems, 2000) performs the filling process efficiently. This machine employs a dual-stage weighing system with automatic feedback, allowing precise dosage adjustments. The CRF 24H model reaches a maximum capacity of 300 cans per minute for 99 mm cans and 150 cans per minute for 127 mm cans. Moreover, the Mettler Toledo Garvens scale (2020) ensures weight conformity, enhancing production consistency… Blodpfx Asvzxgyob Ter Production Capacity The line accommodates various filling capacities, making it highly versatile: 400-gram cans: up to 18,500 cans per hour. 800 / 850 / 900-gram cans: up to 10,200 cans per hour. Pre-seamers In this used line for baby powder milk, following filling, the can bottom unpacker and pre-seamer prepare the cans for final sealing. The Siemens S7 PLC integrated into the system ensures precise control. Additionally, the Ferrum pre-seamers (2000), with models F504EC for 127 mm cans and F505EC for 99 mm cans, provide strong adhesion before the final sealing step.d Quality Control To guarantee product integrity, the high care room control station supervises all production stages. Equipped with a PLC and production management software, this station allows operators to monitor and adjust processes as needed.

Condition: new, Year of construction: 2025, Working width: 1300 mm Blsdpfxsxf Ef He Ab Ter Manual adjustment of element height Glue dosage adjustment CE marking Safety switch Power supply: 380 V Completely new, year 2025

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Bsdpfx Aow Uvdgeb Tjlr Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Condition: used, Year of construction: 2000, Used doy pack filling machine Bossar B 2500 Introduction and Structural Composition In the landscape of technical solutions for packaging, the used Bossar B 2500 doy pack filling machine emerges as an advanced piece of equipment, thanks to its construction features and high-level functionality. Starting from its configuration, the Bossar B 2500 is a horizontal machine, specifically the B2500 L/STU-1 model. This designation is not accidental but indicates its ability to operate with a horizontal arrangement, fundamental for certain types of packaging and to maintain consistent production efficiency. This filling line works in various formats, from 200ml to  1l. A crucial part of its architecture is the choice of stainless steel for the entire base of the automatic machine. This not only provides significant corrosion resistance but also a rigid and robust structure, which is indispensable in an industrial environment where equipment durability and resistance to various mechanical stresses are essential. Sensing Technology and Power System of Used Doy Pack Filling Machine Bossar B 2500: The Used doy pack filling machine Bossar B 2500 integrates an advanced sensing system, the photo sensor, which plays a vital role in ensuring precision during the filling process. Its function is to verify the correct position of the packaging material, preventing errors that could lead to waste or production defects. This technology represents a qualitative leap compared to traditional methods, offering greater operational reliability. In tandem with the sensor, we find the exit conveyor belt. This component is no less important, as it manages the flow of consumables through the machine, ensuring that there are no interruptions or malfunctions that could compromise the entire production cycle. Its presence is further testimony to the technical sophistication of the Bossar B 2500. Versatile Dosing Systems and Applications Continuing the examination, we reach the heart of the filling process: the dosing system. This system, in particular the piston dispenser, is calibrated to deliver a precise volume of product in each cycle. This ensures consistency of dosage and integrity of the final product. The dispensing nozzles are specific to liquid products, while the nozzle tips are designed to handle paste products, underlining the machine’s ability to handle a variety of materials. Film edge correction is another technical feature that distinguishes this equipment. This functionality is essential to maintain the correct tension and alignment of the packaging film throughout the entire process. The reason is to prevent damage and anomalies. Bsdpfjvgubqex Ab Telr Conclusion and Final Considerations The Used doy pack filling machine Bossar B 2500 is not just an assembly of mechanical components. It’s the result of years of innovation in the field of doy pack filling machines. It is important to note that Bossar, the original manufacturer of this line, was recently acquired by another company called SIG.

Condition: new, Year of construction: 2025, Working width: 1300 mm Manual adjustment of element height Glue dosage adjustment Bledpoxf Ed Aofx Ab Tsr CE marking Safety switch Power supply: 380 V Completely new, year 2025

Condition: used, Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Introduction ot the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH The Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH  processes 0.75-liter glass bottles with high efficiency. Since this line handles sparkling wines, spumante, and still wines, it integrates specialized machinery that delivers precision, quality, and reliability. Consequently, it streamlines operations from bottle preparation to final palletizing, ensuring seamless production. Components of the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Bedpfx Aevgvmheb Tjlr Bortolin Kemo DEPALTERM SP/02/V Depalletizer (2014) In the Used Isobaric Bottling Line for Sparkling Wine, the Bortolin Kemo DEPALTERM SP/02/V, built in 2014, automates the handling and sorting of glass bottle pallets. Notably, its AISI 304 stainless steel structure resists corrosion and meets strict hygiene requirements in production environments. The depalletizer uses robotic grippers to lift entire bottle layers from pallets. Meanwhile, high-resolution optical sensors monitor the container positions, synchronizing the gripping cycle with the rest of the line. CIP Procomac UNIFLUX 2000 in the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH The Procomac UNIFLUX 2000 CIP system performs in-situ cleaning and sanitization of the bottling line equipment. To enhance efficiency, the system includes AISI 316L stainless steel tanks with electropolished surfaces that resist chemical detergents and sanitizing solutions. Moreover, its variable flow rate reaches 15 m³/h, ensuring efficient circulation of cleaning solutions. In the Used Isobaric Bottling Line 9000 bph the CIP system executes sequential cleaning cycles. First, it starts with a pre-rinse using demineralized water to remove large residues. Then, it washes the equipment with alkaline detergents, dissolving organic residues. Afterward, an intermediate rinse eliminates detergents before the system performs final sanitization with acidic or sterilizing solutions. Procomac 32.56.8.8 Filling Monoblock (2000) The Procomac 32.56.8.8 filling monoblock, built in 2000, serves as the core of this bottling line. It efficiently fills sparkling wines, frizzante, and still wines while maintaining product integrity. Consequently, it ensures high performance throughout the entire production process. The rinsing unit features 32 rotary nozzles that thoroughly clean bottles before filling. Furthermore, it supports 28mm standard necks and operates with full automation to remove impurities. The Corfill Sara Elp 32, manufactured in 2012, fills bottles with 56 stainless steel filling valves (AISI 316). Because these valves resist corrosion, they ensure accurate dosage. Additionally, the isobaric system maintains constant pressure, preserving carbonation and product quality. Since the Siemens PLC optimizes operations, it adjusts quickly to handle various product types efficiently.