Used Dosage for sale (83)

Condition: used, mileage: 230,120 km, power: 110 kW (149.56 HP), first registration: 05/2019, fuel type: diesel, maximum load weight: 575 kg, overall weight: 3,500 kg, color: white, gearing type: mechanical, loading space volume: 16 m³, loading space length: 3,730 mm, loading space width: 2,070 mm, loading space height: 2,170 mm, Allowable total weight: 3500kg, Load compartment (L W H): 3,730 mm x 2,070 mm x 2,170 mm, Load compartment volume: 16 m³, C/T DOSAGE Podpfx Aaotqwkyolspl

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Psdpfxsgq N Eze Aalepl Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: used, Cleaning-in-place system for closed cleaning of process systems. Constructed from a rectangular container divided into 2 chambers. For each chamber, the tank is equipped with a removable lid and an outlet pipe with manual valve. With dosing pumps for acid, alkali and disinfectant as well as a centrifugal pump as a CIP feed pump. Additional title: with 2 rectangular chambers Length: 3,7 m Width: 0,5 m Height: 1,5 m Ppsdpfx Aaoxbptmoljl Weight: 300 kg Material: stainless steel Features: rectangular vessel with 2 chambers, outlets with manual valves, prerun pump, dosage pumps

Condition: used, operating hours: 500 h, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Pjdpfovgud Sox Aalopl Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: used, operating hours: 2,001 h, Used Bottling Line for baby powder milk 18000 cphs The bottling line for baby powder milk at 18,000 cans per hour operates as a fully adutomated system that ensures high efficiency and precision. Each machine in this line optimizes production flow, reduces waste, and meets the strict quality standards required in the food sector Key features of the Used Bottling Line for baby powder milk 18000 cph Depalletization The process starts with the Jorgensen depalletizer (2000), an advsanced system that handles preformed cans. This machine integrates a Siemens S7 PLC and Danfoss frequency converters, enabling precise production flow management. Additionally, the system includes an empty pallet collection station and an infeed buffer for 5 pallets, which facilitate continuous processing without interruptions. Rinsing machine Next, the cans move through the air rinsing machine, which removes particles and impurities using a high-pressure compressed air jet. This process prevents contamination while maintaining optimal hygienic conditions before filling. As a result, the product remains safe and meets regulatory requirements. Scoop Placement machine in this bottling line for baby powder milk The scoop placement machine (Hoppmann, 2014) plays a critical role in ensuring the accuracy of scoop insertion. This machine, which has a capacity of 360 scoops per minute, features a high-capacity buffer hopper, dedicated conveyor belts, and an automated insertion unit. Consequently, it places scoops with exceptional precision in each can. Ppedpfxjvzxgyo Aalel Filling machine The powder filling machine (Mannesmann Dematic / Colby Powder Systems, 2000) performs the filling process efficiently. This machine employs a dual-stage weighing system with automatic feedback, allowing precise dosage adjustments. The CRF 24H model reaches a maximum capacity of 300 cans per minute for 99 mm cans and 150 cans per minute for 127 mm cans. Moreover, the Mettler Toledo Garvens scale (2020) ensures weight conformity, enhancing production consistency… Production Capacity The line accommodates various filling capacities, making it highly versatile: 400-gram cans: up to 18,500 cans per hour. 800 / 850 / 900-gram cans: up to 10,200 cans per hour. Pre-seamers In this used line for baby powder milk, following filling, the can bottom unpacker and pre-seamer prepare the cans for final sealing. The Siemens S7 PLC integrated into the system ensures precise control. Additionally, the Ferrum pre-seamers (2000), with models F504EC for 127 mm cans and F505EC for 99 mm cans, provide strong adhesion before the final sealing step.d Quality Control To guarantee product integrity, the high care room control station supervises all production stages. Equipped with a PLC and production management software, this station allows operators to monitor and adjust processes as needed.

Condition: used, Year of construction: 2000, Used doy pack filling machine Bossar B 2500 Introduction and Structural Composition In the landscape of technical solutions for packaging, the used Bossar B 2500 doy pack filling machine emerges as an advanced piece of equipment, thanks to its construction features and high-level functionality. Starting from its configuration, the Bossar B 2500 is a horizontal machine, specifically the B2500 L/STU-1 model. This designation is not accidental but indicates its ability to operate with a horizontal arrangement, fundamental for certain types of packaging and to maintain consistent production efficiency. This filling line works in various formats, from 200ml to  1l. A crucial part of its architecture is the choice of stainless steel for the entire base of the automatic machine. This not only provides significant corrosion resistance but also a rigid and robust structure, which is indispensable in an industrial environment where equipment durability and resistance to various mechanical stresses are essential. Sensing Technology and Power System of Used Doy Pack Filling Machine Bossar B 2500: The Used doy pack filling machine Bossar B 2500 integrates an advanced sensing system, the photo sensor, which plays a vital role in ensuring precision during the filling process. Its function is to verify the correct position of the packaging material, preventing errors that could lead to waste or production defects. This technology represents a qualitative leap compared to traditional methods, offering greater operational reliability. In tandem with the sensor, we find the exit conveyor belt. This component is no less important, as it manages the flow of consumables through the machine, ensuring that there are no interruptions or malfunctions that could compromise the entire production cycle. Its presence is further testimony to the technical sophistication of the Bossar B 2500. Ppedpfxjvgubqj Aaljl Versatile Dosing Systems and Applications Continuing the examination, we reach the heart of the filling process: the dosing system. This system, in particular the piston dispenser, is calibrated to deliver a precise volume of product in each cycle. This ensures consistency of dosage and integrity of the final product. The dispensing nozzles are specific to liquid products, while the nozzle tips are designed to handle paste products, underlining the machine’s ability to handle a variety of materials. Film edge correction is another technical feature that distinguishes this equipment. This functionality is essential to maintain the correct tension and alignment of the packaging film throughout the entire process. The reason is to prevent damage and anomalies. Conclusion and Final Considerations The Used doy pack filling machine Bossar B 2500 is not just an assembly of mechanical components. It’s the result of years of innovation in the field of doy pack filling machines. It is important to note that Bossar, the original manufacturer of this line, was recently acquired by another company called SIG.

Condition: used, Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Introduction ot the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH The Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH  processes 0.75-liter glass bottles with high efficiency. Since this line handles sparkling wines, spumante, and still wines, it integrates specialized machinery that delivers precision, quality, and reliability. Consequently, it streamlines operations from bottle preparation to final palletizing, ensuring seamless production. Components of the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Bortolin Kemo DEPALTERM SP/02/V Depalletizer (2014) In the Used Isobaric Bottling Line for Sparkling Wine, the Bortolin Kemo DEPALTERM SP/02/V, built in 2014, automates the handling and sorting of glass bottle pallets. Notably, its AISI 304 stainless steel structure resists corrosion and meets strict hygiene requirements in production environments. The depalletizer uses robotic grippers to lift entire bottle layers from pallets. Meanwhile, high-resolution optical sensors monitor the container positions, synchronizing the gripping cycle with the rest of the line. CIP Procomac UNIFLUX 2000 in the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH The Procomac UNIFLUX 2000 CIP system performs in-situ cleaning and sanitization of the bottling line equipment. To enhance efficiency, the system includes AISI 316L stainless steel tanks with electropolished surfaces that resist chemical detergents and sanitizing solutions. Moreover, its variable flow rate reaches 15 m³/h, ensuring efficient circulation of cleaning solutions. Ppodevgvmhjpfx Aalel In the Used Isobaric Bottling Line 9000 bph the CIP system executes sequential cleaning cycles. First, it starts with a pre-rinse using demineralized water to remove large residues. Then, it washes the equipment with alkaline detergents, dissolving organic residues. Afterward, an intermediate rinse eliminates detergents before the system performs final sanitization with acidic or sterilizing solutions. Procomac 32.56.8.8 Filling Monoblock (2000) The Procomac 32.56.8.8 filling monoblock, built in 2000, serves as the core of this bottling line. It efficiently fills sparkling wines, frizzante, and still wines while maintaining product integrity. Consequently, it ensures high performance throughout the entire production process. The rinsing unit features 32 rotary nozzles that thoroughly clean bottles before filling. Furthermore, it supports 28mm standard necks and operates with full automation to remove impurities. The Corfill Sara Elp 32, manufactured in 2012, fills bottles with 56 stainless steel filling valves (AISI 316). Because these valves resist corrosion, they ensure accurate dosage. Additionally, the isobaric system maintains constant pressure, preserving carbonation and product quality. Since the Siemens PLC optimizes operations, it adjusts quickly to handle various product types efficiently.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) Ppodpfoxlctbsx Aalol - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Warranty: 12 months Transport Initial commissioning on site Training

Condition: used, Non-returnable PET filling line, consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in 4x5 arrangement) - PET shredder (Strautmann BrikPress 240, year of construction 2019) - Crate washer with cleaning nozzles - Preform feeding device - Stretch blow-moulding machine (SIPA, type SFR 8 EVO, with 8 cavities) - Stretch blow-moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Premix system (Procomac Starmix, built in 2001, 200 hl/h) consisting of water deaeration, mixer and carbonisation with a total of 4 tanks and two cartridge filters for water treatment. - Velcorin dosage (dmt, Burdomat II G) - Capping task and cap conveying system - PET bottle rinser, filler and capper (Procomac) - Fill level control (Heuft Spectrum TX) with rejection - Labelling machine (P.E. Futura) for hotmelt labelling of wrap-around labels, in a block with dating (Videojet) - Crate packer (BMS) - Free, driven conveyor lines for bottles and crates Additional title: non-returnable PET filling Pjdpfx Aajw Uvd Tolopl Capacity: 16000 bo/h Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, shredder, preform feeder, 2 x stretch blow moulder, premixer, velcorindosage, cap feeding and conveying, rinser/filler/capper, fill level control, labeller, dating, packer, Free crate and bottle transport

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Ppodpfx Aaew Uvdgoljl Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Condition: used, Year of construction: 2000, Gas-fired high-speed steam generator with feed water treatment and dosage module. Additional title: high-speed steam boiler Steam capacity: 120 kg/h Perm. working pressure: 10 bar Capacity: 96 Ltr Set pressure: 20 mbar Length: 1,6 m Width: 0,95 m Pedpfxjw Td Ece Aalopl Height: 2,2 m Base construction: mounted on platform Features: feed water treatment and dosage module

Condition: new, Year of construction: 2025, Working width: 1300 mm Manual adjustment of element height Glue dosage adjustment Pjdpfxsxf Ef Hj Aalspl CE marking Safety switch Power supply: 380 V Completely new, year 2025

Condition: new, Year of construction: 2025, Working width: 1300 mm Manual adjustment of element height Glue dosage adjustment CE marking Safety switch Power supply: 380 V Completely new, year 2025 Psdpfx Ajxf Ed Asalspl

Year of construction: 1997, condition: excellent (used), functionality: fully functional, - Manufacturer: Mercedes-Benz - Type: 1424 - First registration: 07/1997 - Kilometers: 153185km - Unladen weight: 12.200kg - Payload: 3.800kg - Gross vehicle weight: 16,000kg Psdpou Tuzlofx Aalepl - Power: 180kw / 244PS - Gearbox 7 speed manual - Wheel formula 4x2 - 2 auxiliary drives - Power take-off 1: NMV 4/12 - Power take-off 2: NA 4/120-10c - Travel drive in work mode - Make ZF Type HZA Duodrive - Vmax: 15/min, best cleaning speed 11/min - Body/tank - Decontamination chamber: 500 liters - Water pockets: 3200 liters (reduced from 5000 to 3200 due to weight problem) - Dirty water tank: 6000 liters (A1 tank) - Cyclone separator x2 - Cleaning concentrate - Hot water treatment - 2 vacuum pumps (capacity 1650cmb/h at 460 mbar) - 2 high pressure pumps (capacity 15 l/min-280bar) - Manual suction through suction device at the rear - High-pressure lance with adjustable dosage - High-pressure front bumper pre-treatment - Next HU: 11/2025 - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 1,200 mm, empty load weight: 2,000 kg, table width: 1,200 mm, Veneer Splicer with Integrated Gluing System Manufacturer: Fisher & Rückle Model: IMPETUM 1200 (2025 Model) Includes 4 mm Veneer Thickness Conversion Kit For the quick and easy conversion of the IMPETUM for processing veneer thicknesses up to 4 mm. The conversion kit includes a foot pedal for manual triggering of veneer infeed. For gluing and producing seamless lengthwise joints of parallel-joined veneer strips in a single operation, using standard urea glues. Technical specifications: - Veneer strips must not show extreme tension or waviness. Ppsdoxd Apmspfx Aaljl - Veneer strip length (with the grain): 380 - 4000 mm - Veneer strip width (across the grain): 45 - 1200 mm - Veneer thickness: 0.4 - 1.5 mm (up to 4 mm with conversion kit) - Feed speed: 5 - 50 m/min - Throughput speed (practical average value): approx. 20 - 30 m/min - Heating zone length: 1000 mm - Max. heating temperature: 200 °C - Throat depth: 1200 mm - Working height: approx. 960 mm Glue pot capacity: 150 g Glue type: Urea glue Glue pot cooling: Water cooled Features: - Storage of machine settings for recurring orders. - Separate electric drives for chain drive and glue application. During pauses, the chains can be stopped to prevent wear, while the glue in the pot remains in motion to prevent lump formation. - Glue is applied only to the newly fed veneer strips, significantly enhancing joint quality. - Robust, virtually maintenance-free stainless steel transport chains. - Six heating zones for individual temperature settings. - Infinitely variable assembly speeds. - Touch panel with displays for temperature, speed, and pressure. - Easily accessible glue pot for fast refilling or cleaning. - Extended glue usability thanks to integrated glue pot cooling. - Glue dosage system ensures consistent and even glue application without excess glue. Connected load: approx. 3 kW Compressed air: 6 bar Compressed air consumption: 5 NL/min Shipping dimensions: approx. 2300 x 2300 x 1850 mm Weight: approx. 2,000 kg

Year of construction: 2025, condition: new, functionality: fully functional, New machine Stainless steel model 24 months warranty Advantages: + TOP price-performance ratio + easy & fast installation & operation + housing completely made of stainless steel + can of course also be combined with an ice water system Ppedpfx Aaoivdxmolsl + unit automatically opens the required water supply, hot / chilled water + performs the correct mixing until the desired temperature is reached + powerful electronic system, based on microprocessor + water dosage from 0.1 to 99.9 liters or 1 to 999 liters + temperature variations are automatically compensated + digital display of water temperature and quantity + temperature is adjusted with thermostatic mixer (rotary knob) + fast spare parts supply within 1-2 working days SERIAL accessories, included in the price: - 1x drain hose (2 meters in length) with hanging hooks Technical data: - Dosing quantity: 0.1 - 99.9 liters or 1 - 999 liters - Temperature range: 0°C to +40°C (depending on water supply) - Power: 25 W - Water pressure: 2 - 4 bar (recommended) - Connected load: 230 V - 1Ph - 50/60Hz - dimensions: 305 x 120 x 390 mm (WxDxH) - Net weight: 6,8 kg

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Pjdpexa Hzxsfx Aalopl Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Year of construction: 2025, Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Preset programming possible. Hopper volume: 25 liter. Filling weight: 10-500g. Extension of filling range to 5-600g possible when second dosing screw is added. Built-in filling head height adjuster and weighing cells guarantee accuracy by means of permanent control and automatic correction of dosage. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute; power: 220V, 0.95kW; machine dimensions: L800xW790xH1900mm; weight: 130kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ppodev Nk D Tepfx Aalol

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Psdpfovcqv Njx Aalepl Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: used, Additional title: y. o. c.: mostly 2003 Finished wort: 150 hl Grist: 2500 kg Ppedpfsvcqrwjx Aalel Current: three-phase A.C. current Voltage: 400 V Frequency: 50 Hz Features: lauter tun, low pressure cooking wort copper-whirlpool system with external wort boiling system, additional whirlpool, trub collecting unit, hop dosage Periphery: lauter wort heater, vapor condenser

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Ppsdevcqx Dopfx Aalel Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: like new (used), Year of construction: 1996, functionality: fully functional, Groninger DFVK 4000 - KVK 106 B High-performance filling and closing system for vials - unused, as good as new This powerful filling, stopper inserting and flanging machine has never been put into operation and is in as good as new condition. It is ideal for the precise filling and secure closing of vials with an output of up to 12,500 objects per hour, depending on the medium and dosage. Technical specifications Filling quantity: up to 100 ml Object size: max. Ø 52 mm / height 180 mm Stopper size: max. Ø 32 mm Cap size: max. Ø 36 mm Format sets for vials: 2R, 6R/8R, 10R, 25R, 50H, 100H Includes: stainless steel dosing pumps, rubber stoppers & aluminum cap formats (Ø 13 mm & 20 mm) Filling and closing process sequence Pedpovyic Aofx Aalepl Feeding & filling: Vials are separated on a rotary table (Ø 80 cm), transported and filled with piston pumps using below-level filling. Pre- and post-gassing possible. Stopper insert: 4-lane sorting machine with vibrating chutes ensures precise positioning and pressing in of the stoppers (pick-up process). Flanging: Flip-off caps are fed in and securely closed with 6-position flanging rollers (individually adjustable contact pressure). Output: Vials are processed directly or prepared for freeze-drying. Special features Robust stainless steel construction with safety cover User-friendly: Control via Siemens S5 control cabinet Including English machine and operating manual Technical data Manufacturer: Groninger, Crailsheim Year of construction: 1996 Machine no.: 4005 / 4008 Electrical supply: 220/380V, 3 phases, 50 Hz Dimensions: Machine 450 x 260 x 265 cm, control cabinet 120 x 60 x 215 cm Weight: approx. 1,400 kg This unused, high-quality filling and closing system is ideal for pharmaceutical, biotechnological or cosmetic companies that want to expand their production capacity. Attention: Vial washer and Steri Tunnel not available. Contact us for more information or a customized offer.

Condition: like new (used), Working width: 1000 mm Glue dosage adjustment Manual adjustment of roller spacing Emergency stop switch Pjdjwqdpkspfx Aaljpl

Condition: excellent (used), Dosage filler. Make - FillFlex. Model - F5500A Capacity - 25L/min. Dosage from 20ml-1500ml. Max temperature - 60 degrees or above. Extra pump housing included and hose pump head for dosing. Various spare parts included. CLH.24 Pjdpfx Aaevhbckslspl

Condition: new, Year of construction: 2017, Stainless steel dispenser for pizza and other doughs, with built-in stainless steel container, more than 5 pieces available With a capacity of 30 kg, with a dosage of 50-800 gr, tare weight: 84 kg, With portion counter. Dosing with a tolerance of +/- 10%: 50/90 - 80/130 - 120/180 - 170/230 - 220/300 grams with safety switch on kettle lid. Size: 510*830*660mm 400V voltage, 1KW power VIDEO: On youtube Ppedpsr Uimwofx Aalol