Used Discharge for sale (2,570)

Condition: used, Year of construction: 1999, used fan Radial fan with V-belt drive Suitable for use in raw air and clean air applications Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Discharge direction GL 360/5 Connection 300 mm Motor power 11 kW Air flow 7000 m³/h Availability: short-term Gsdozk Niyspfx Af Seiw Location: Röllbach

Condition: excellent (used), Year of construction: 2005, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, Control system: AGIEVISION Godpfx Afozk Ibze Sjiw Table dimensions: 600 x 450 mm Max. table load: 400 kg Max. travel ranges: 350 x 250 x 350 mm (X/Y/Z) 28-position tool magazine C-axis integrated: 60 RPM CO2 extinguishing system Year of manufacture: 2005 Approx. 16,000 erosion hours The machine is fully functional, ready for operation, and connected.

Condition: new, axle configuration: 3 axles, color: white, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Notes = EUROMIX MTP 12 cbm mixing semi-trailer EUROMIX MTP - mobile mixer body EM 12 R - standard version Gjdpfx Asym Sy Uof Ssiw Model: EM 12 R Nominal volume 12 m³ ready-mix concrete Mixing drum in standard design Mixing drum in standard version made of S355 material Mixing spirals in standard version made of S420 MC material Gearbox manufacturer ZF P5300 Hydraulic pump Bosch Rexroth Hydraulic motor Bosch Rexroth Oil cooler system integrated Mixing control mechanical, start/stop electrical Compressed air water system Water connection at the service platform with hose line Water filling line, on one side with C-coupling Mixing drum with one service flap Access ladder with service platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in the filling hopper, discharge chute, and swiveling chute Drum locking mechanism to secure the drum during maintenance work Polyurethane primer Weight approx. 4,725 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mudguard made of steel above the rear axles 2x extension gutters made of steel or plastic Water system Water tank 650 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrics Mixer operation – mechanical at the rear Start-stop system (for EDC) Geometric volume 19420 L Volume water tank 12787 L Tank inclination 10.5 Length 7545 mm Width 2300 mm Height 2765 mm Engine: FTP 55 kW Mounted on Euromix MTP 3-axle semi-trailer Vehicle type: EuromixMTP KIS 24 3-axle mobile mixer chassis Axles with short steering ratio (310/340) for ready-mix operation 1 including Axle 9t SAF 22.5" disc brake, single tires for air suspension 3 including Axle track: 2040 mm (standard dimension) 3 including Axle spacing approx. 1400 mm / 1400 mm 1 including EBS braking system Tires 385/65 R 22.5 Plastic fenders, 180 degrees, above each axle (for 3 axles) 1 including Chassis paint in RAL 9005 deep black 1 including KTL coating with zinc phosphating plus powder coating, highest corrosion protection (only available in powder coating) 1 including Tire pressure monitoring basic version, connected to the EBS CAN-bus system 1 including 24 t telescopic support legs with single-side operation and 1 including Half-round with base plate Axle loads: 24,000 kg (3 x 8000 kg, technically: 3 x 9000 kg) 1 including Chassis length approx. 8570 mm 1 including For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further Information = Year of construction: 2026 Usable material: Concrete GVW: 44,000 kg Brand of the superstructure: EuromixMTP EM 12 R Please contact Harun Cevik, Jamila Azzi, Denis Omeragic, or Henri Omeragic for further information.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,000 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electronic stability program (ESP), navigation system, onboard computer, trailer coupling, - Leaf spring suspension - Brake booster - Differential lock - Sun visor MAN TGS 41.480 BB 8x4 EURO 6e EuromixMTP EM 12 R - NEW - without registration - Vehicle Equipment Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e MAN TipMatic 12.28 OD - MAN TipMatic Efficiency driving program, up to 70,000 kg Front axle tires, optional 315/80R22.5, steering S+G T Rear axle tires, optional 315/80R22.5, drive S+G TL Front axle, 9,200 kg, not driven, straight, steered, not liftable Rear axle, 13,000 kg, AP axle with through drive, straight, not steered, not liftable Axle ratio, i=3.63 Suspension type leaf/leaf (BB) Sun visor, in front of windshield Daytime running lights, LED Multifunction steering wheel, height and inclination adjustable MAN Media System 7 inch Navigation system Cruise control (FGR - driving speed control) Wheelbase 1795+2505+1400 mm Cab M, medium length Air deflector against dust swirl Raised air intake with dry air filter / pre-separator Differential lock Fuel tank 300l left and 35l AdBlue Steel bumper, three-part MAN BrakeMatic (Electronic Braking System) Central locking Cab rear wall with 2 windows Driver's comfort seat, air-suspended AUX-in/ USB in the dashboard Concrete mixer equipment EUROMIXBETON MTP - Concrete mixer body EM 12 R - Standard Model: EM 12 R Nominal volume 12m³ ready-mix concrete Mixing drum in standard design Mixing drum in standard version made of material S355 Mixing spirals in standard version made of material S420 MC Gearbox, manufacturer ZF-P5300 Hydraulic pump, manufacturer Bosch Rexroth Hydraulic motor, manufacturer Bosch Rexroth Oil cooler system integrated Mixing control, mechanical and start-stop, electrical Compressed air water system Godpfsym S Ulex Af Ssiw Water connection on the platform with hose Water filling line, one-sided with C-coupling Mixing drum with one service flap Access ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swivel chute Drum locking mechanism to secure the drum during maintenance Polyurethane primer Weight approx. 4,725 kg, deviations +/- 5% with emergency stop function according to EU safety technology Fenders made of steel over the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C"-coupling Operation & Electrical Mixer operation - mechanical, rear Start-stop system (with EDC) Geometric volume 19420 L Volume water tank 12787 L Inclination of the tank 10.5 Length 7545 mm Width 2300 mm Height 2765 mm Special equipment: Extension chute plastic - steel - aluminum Folding chute plastic (or steel) Retention flap swivel chute Plastic box Dust box stainless steel Additive tank, non-pressurized Additive pressure tank Trowel holder ¾ drum closure Rear view camera LED work light Year of construction: 2025 Usable material: Concrete Front axle 1: Steered...

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Notes = EUROMIX MTP 10 cbm Mixing Semi-Trailer - New - 2-axle - SAF axles - 1x Lift axle - Air suspension ABS - Tires 385/65 R22.5 - Gross vehicle weight approx. 36,000 kg - Tare weight approx. 7,640 kg - Separate motor EUROMIX MTP - Mobile mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10 m³ ready-mix concrete Lightweight mixing drum Lightweight mixing drum made of HARDOX S450 material Lightweight mixing spiral made of HARDOX S500 material Gearbox manufacturer ZF P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooling system integrated Mixing control, mechanical and start/stop electrical Compressed air water system Water connection on the platform with hose line Water filling line, on one side with C-coupling Mixing drum with one service flap Giedpfx Afoym Tacj Sew Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge trough, and swiveling chute Drum locking for securing the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety technology Mud flaps made of steel over the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C"-coupling Operation & Electrical System Mixer operation - mechanical, rear Start-stop system (with EDC) Geometric volume 17361 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Special equipment: Extension chute, plastic - steel - aluminum Folding chute, plastic (or steel) Retaining flap, swiveling chute Plastic box Dust box, stainless steel Additive tank, non-pressurized Additive pressure tank Trowel holder ¾ drum closure Rear view camera LED work light EuromixMTP Intelligent drum control (Electronic mobile mixer control) Step on the underrun protection with handrail Water meter Pressure gauge Frame cover Fire extinguisher Holder for self-compacting concrete pipe (5 m long) Transition piece for self-compacting concrete pipe (Reducer chute) Hydraulic chute support For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по-русски Govorimo Srpskohrvatski = Further Information = Year of construction: 2026 Usable material: Concrete GVW: 38,000 kg Brand of body: EuromixMTP EM 10 L MOT (Technical Main Inspection): New TÜV upon delivery Please contact Harun Cevik, Jamila Azzi, Denis Omeragic or Henri Omeragic for more information.

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, = Additional Options and Accessories = - Air suspension = Notes = EUROMIX MTP 10 cbm mixing semi-trailer (Rental possible) Empty weight approx. 6400 kg (trailer only) - New - 2-axle - 10-ton SAF axles - 1x lift axle - air suspension ABS - Tires 385/65 R22.5 - Technical gross vehicle weight 38,000 kg EUROMIX MTP - Mobile mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10 m³ ready-mix concrete Mixing drum in lightweight design Mixing drum in lightweight version made of HARDOX S450 material Mixing blades in lightweight version made of HARDOX S500 material Gearbox manufacturer ZF P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooling system integrated Mixing control mechanical and start/stop electric Compressed air water system Water connection at the platform with hose line Water filling line, on one side with C-coupling Mixing drum with one service flap Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge trough and swiveling chute Gijdeym Szfopfx Af Sjw Drum lock to secure the drum during maintenance Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% With emergency stop function according to EU safety technology Mud flaps made of steel above the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrical System Mixer operation - mechanical at the rear Start-stop system (for EDC) Geometric volume 17361 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Special equipment: Extension chute plastic - steel - aluminum Folding chute plastic (or steel) Retaining flap swiveling chute Plastic box Dust box stainless steel Additive tank, non-pressurized Additive pressure tank Trowel holder ¾ drum closure Rear view camera LED work lights EuromixMTP Intelligent drum control (Electronic mobile mixer control) Step on the underbody guard with handrail Water meter Pressure gauge Frame cover Fire extinguisher Holder for self-compacting concrete pipe (5 m long) Adapter for self-compacting concrete pipe (reducing chute) Hydraulic chute support For further questions, our team is available in the following languages. We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further Information = Year of construction: 2026 Usable material: Concrete GVW: 38,000 kg Body brand: EuromixMTP EM 10 L Please contact Harun Cevik, Jamila Azzi, Denis Omeragic or Henri Omeragic for further information.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 250 mm, total height: 1,750 mm, total length: 2,500 mm, total width: 2,300 mm, overall weight: 2,500 kg, For sale is a fully functional KASTO twin AE3 – a robust horizontal bandsaw machine for the reliable and economical cutting of solid and profile materials in general mechanical engineering, as well as in series and single-piece production. With a maximum material width of approximately 250 mm and a clamping height of approximately 200 mm, the machine is suitable for clean cutting of a wide variety of materials and cross-sections. Gijdpfxjzk Hd Us Af Sow The well-thought-out design, with a feed length of approximately 2200 mm and a material discharge length of approximately 1600 mm, ensures a comfortable and efficient material flow. The machine is complemented by two discharge roller conveyors, each with a length of approximately 1000 mm, resulting in a total material discharge length of approximately 4000 mm – ideal for the safe handling of even longer workpieces. The compact design, with dimensions of 2500 x 2300 x 1750 mm and a weight of approximately 2500 kg, offers high stability and smooth operation, which has a positive effect on cutting quality and service life. The scope of delivery also includes approximately 8 spare saw blades, which enable immediate and uninterrupted use of the machine. Overall, this is a reliable and versatile bandsaw machine that combines precision, performance, and efficiency in industrial production. --- Optional accessories A conveyor belt in lengths of 310 cm and 420 cm can be purchased separately to optimize material flow and provide comfortable handling of the cut material. --- You are welcome to inspect the machine in our workshop while it is running. If you are interested, we will gladly send you demonstration videos of the machine. Upon request, we offer delivery and commissioning of the machine as part of a comprehensive, hassle-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG

Year of construction: 1989, condition: excellent (used), functionality: fully functional, Manufacturer: RAPID Type: GK 4535-KU Dimensions of the rotor/grinding chamber: 450 x 350 mm Gedpfx Afsxz D R Tj Sjiw Number of rotor blades: 3 Number of stator blades: 2 Power of the drive motor: 18.5 kW The technical condition is very good!!! Equipment: Plastic discharge chute + silo PRICE REDUCTION FROM 6500 TO 5950 EUR!!!

Year of construction: 2021, condition: used, Manufacturer : Thémis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Laser : keyence mdu1000C Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes Giodpfx Afsx R Aqto Sow This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A Bofa Ad Access vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control computer, ... Documentation, drawings, backup, software available.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,030 h, overall weight: 1,800 kg, Jensen A425 / Wood Chipper / Shredder / Chopper / Ø 20 cm • Manufacturer: Jenzen • Type: A425 • Year of manufacture: 10/18/2016 • Operating hours: 1030 hours • Brushwood shredder • Wood chipper • Shredder • Chopper Giodpfx Afezipw Ue Sjw • 2x knives, new • Front bearing, new • Flange shaft, new • Clutch for storage unit, new • Diameter of knife discs: 73 cm x 3 cm • Number of knives: 2 • Discharge chute, 360° rotatable – deflector flap, infinitely adjustable • Infeed opening: 24.5 cm x 20 cm • Stem diameter: 20 cm • Cutting length: adjustable from 5–20 mm • Chopping capacity: approx. 20 m3/h • Max. speed: 1000 • Permissible support load: 75 kg • Transport length: 1.20 meters • Transport width: 90 cm • Transport height: 2.10 meters • Total weight: 1800 kg • German machine • Immediately ready for use • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Gisdpfx Afov Nzpgs Ssw Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Year of construction: 1998, condition: excellent (used), 1. Stingl automatic retailer circular (multilama): - Cutting height 240mm - cutting width 740mm (passing 900mm or more) - Main motors 2 x 110 kw - Automatic advance - 4 cutting groups with hydraulic drive, variable (axle in axle) - longitudinal discharge and lateral transfer - Automatic cut to the desired length, integrated in the machine, immediately before the evacuation Gjdpfjdzdvcox Af Sjiw - Waste separator - Complete, modern electric panel 2. Stingl automatic circular cutting circle: - Cutting height 100mm - Cutting width 700mm - power 75kw - waste disposal with waste separators and the main piece separately - automatic (mechanical) sorting on 8-12 lengths - Complete, modern electric panel Both circulars are fully automatic and can work without operator, or a single operator for both! The mechanics of both circulars is Stingl !!!! The machine can also be sold separately.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Giedpfszim Ecox Af Sjw Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Gijdpfx Aozimxpof Sow

Condition: excellent (used), Year of construction: 2018, operating hours: 8,011 h, functionality: fully functional, total length: 16,000 mm, total width: 3,000 mm, total height: 3,600 mm, overall weight: 40,600 kg, power: 360 kW (489.46 HP), Doppstadt DW3060K Büffel/Biopower/Type F/Selector HS-514/Shredder/Crusher/Industrial Shredder • Manufacturer: Doppstadt • Type: DW3060K Büffel • Year of Manufacture: 2018 • Operating Hours: 8011 hrs • Power: 360 kW/489 hp • Industrial Shredder • Engine: Mercedes Benz MTU OM471LA(6R 1300) EUROMOT IV, 6-cylinder diesel • Pneumatic spiral fan • Fuel tank: 2 x 300 liters • AdBlue • Telematics system • Crushing roller, size M • Length: 3 meters • Diameter: 80 cm Giedpfjzimm Hjx Af Sew • Tooth width: 7.4 cm • Tooth height: 8.5 cm • Number of teeth: 125 pieces • Throughput: 20-60 t/h, depending on the material • Magnetic belt • Track system: Strickland 335713-DK40-AA • 2 travel speeds • Loading height: 3.10 meters • Remote control • Central lubrication system • Transport length: 16 meters • Transport width: 3 meters • Transport height: 3.60 meters • Total weight: 40,600 kg • German machine • Ready for immediate use _____ Selector HS-514/Star screen with return conveyor • Screen size: 8-10 cm • 13 star shafts • Integrated support legs • The attachment is picked up by the machine and driven via the auxiliary hydraulics • Star shafts are reversible • Reversing mechanism: Hydraulic • Return system for larger materials • Discharge height: 3.10 meters • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions.

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber Gsdpfx Aozil Txjf Ssiw - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Giedpszil R Rofx Af Sew Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 18 h, functionality: fully functional, High-performance scrubber dryers in top condition for sale! The unit is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 20h Year of manufacture: 2025 SCHORR Scrubber Dryer 24V Floor Scrubber 100Ah Cleaning Machine Efficient floor cleaning combined with extremely easy operation. This scrubber dryer, equipped with a 100 Ah battery and a 51 cm brush diameter, offers impressive cleaning performance of up to 2500 m²/h, ideal for the efficient cleaning of medium to large areas. With its robust design and long battery life, it guarantees reliable cleaning even in demanding applications. The installed 100 Ah batteries allow for intensive continuous use of approximately 4 hours. The batteries can be conveniently charged using the included charger at a standard 230V socket. SCHORR Scrubber Dryer RR850FS – Discover the advantages: -- Up to 2500 m²/h cleaning performance -- 60-liter wastewater tank -- 510mm brush diameter -- 24V 100Ah batteries -- Including charger -- All-electric -- Ideal for warehouses -- Extremely robust and reliable Gijdszilddopfx Af Sow Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR850FS Drive: Direct drive Suction motor power: 500W Brush motor power: 500W Operating time: approx. 4 hours Number of wheels: 2 Tires: PU (non-slip) Weight: 250kg Basic dimensions Fresh water tank volume: 55l Dirty water tank volume: 60l Disc brush diameter: 510mm Overall length: 1400mm Overall width: 850mm Overall height: 1050mm *Further technical data available upon request. The scrubber dryer is user-friendly and offers an intuitive interface that is easy to understand even for inexperienced users. With its ergonomic design and flexible steering, it enables effortless navigation through narrow spaces and ensures efficient cleaning with minimal effort. The scrubber dryer has a 55-liter fresh water tank and a 60-liter wastewater tank. The main advantage of this ratio is that it prevents more water from being absorbed than discharged accidentally. This prevents overflow, even if foaming occurs in the tank. Of course, we usually have all spare parts in stock and can deliver them quickly if you have any problems. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the unit? No problem! We also offer attractive options for this. Just contact us, and we will advise you on the various options. We look forward to your inquiry! We at SCHORR are happy to answer any questions you may have about our scrubber dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your consultation.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, overall weight: 230 kg, machine/vehicle number: RR42ABH, SCHORR RR42ABH – Professional wood chipper for branches up to 100 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR42ABH is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 100 mm in diameter and impresses with its robust design, high pulling power, and easy operation. Using the 3-point linkage (Category 1 and 2), you can attach the RR42ABH to your tractor in just a few minutes. The height-adjustable support feet keep it securely in position during assembly and disassembly, and the matching PTO shaft is included. With a power requirement of 18 to 50 hp, it is also suitable for smaller tractors and compact tractors. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping result and a consistent material flow. The large feed hopper allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited in a targeted manner – whether in piles, trailers, or big bags. Advantages ✓ Compact 3-point mounted chipper for tractors from 18 to 50 hp ✓ Chips branches and brushwood up to 100 mm in diameter ✓ Extended feed hopper also handles bulky crown wood ✓ Robust knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ Height-adjustable support feet, quick 3-point mounting (Cat 1 & 2) ✓ PTO shaft included, ready for use in minutes ✓ Directly from the manufacturer, with spare parts stock & workshop service Technical data Gsdpezilb Aofx Af Sjiw Manufacturer: SCHORR Model: RR42ABH Drive type: PTO, direct drive 3-point category: Cat 1 & 2 Max. branch diameter: 100 mm Chipping type: Drum, self-feeding Number of knives: 4 + 1 counter-knife Weight: 230 kg Overall length: 1070 mm Overall width: 830 mm Overall height: 1240 mm Discharge angle: 290° Recommended tractor power: 18-50 hp PTO speed: 540-1000 rpm The RR42ABH is designed for long-term use. All components are easily accessible, allowing maintenance work to be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please contact us.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 10 h, overall weight: 560 kg, machine/vehicle number: RR102ABH-S PRO, SCHORR RR102ABH-S PRO – Professional wood chipper for branches up to 255 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR102ABH-S PRO is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 254 mm in diameter and impresses with its robust design, high pulling power, and ease of operation. Two hydraulically driven rollers grip the wood and pull it evenly towards the blade disc, even with bulky, branched material. The feed is conveniently controlled via the control lever: forward, stop, and reverse. If a thick branch gets stuck, briefly reverse it using the reverse function, and the rollers will pull it back in cleanly. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping pattern and a consistent material flow. The large feed opening allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited precisely – whether in piles, trailers, or big bags. Advantages ✓ Powerful PTO-powered chipper for tractors from 60 to 150 hp ✓ Chips branches and logs up to 254 mm in diameter ✓ Hydraulic roller feed with forward and reverse function via the control lever ✓ Independent hydraulic system, no connection to the tractor hydraulics required ✓ Heavy-duty blade disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ 3-point linkage Cat 2 & 3, PTO shaft included ✓ Directly from the manufacturer, with spare parts storage & workshop service Technical data Manufacturer: SCHORR Model: RR102ABH-S PRO Design: 3-point linkage for tractor 3-point category: Cat 2 & 3 Drive: PTO, direct drive PTO speed: 540-1000 rpm Recommended tractor power: 60-150 hp Feed: Hydraulic roller feed, forward and reverse via control lever Hydraulic system: Independent (separate oil tank), no tractor connection required Hydraulic oil tank: 24 L Chipping capacity (max. branch diameter): 254 mm Flywheel diameter: 940 mm Flywheel weight: 200 kg Cutting knives: 4 Counter-knife: 1 Discharge rotation: 290° Safety: Emergency stop Weight: 750 kg Packaging dimensions (L×W×H): 2100 × 1500 × 1300 mm Gedpjzilbcofx Af Soiw The RR102ABH-S PRO is designed for long-term use. All components are easily accessible, so maintenance work can be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please feel free to contact us.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 15 h, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter Gsdpfx Aozilarjf Seiw The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: excellent (used), Hallo, Wir bieten hier kurzen Erowa Kontrolldorn kurz an. ER-008617. Mit diesem lässt sich der Rundlauf und die Achse ausrichten.Passend für Spannfutter 50 +100. Gijdpfx Aeiqunwsf Sew Bei Rückfragen stehen wir gerne zur Verfügung .

Condition: good (used),

Condition: excellent (used), Hello, we offer used Erowa PalletSetW vices. They have been cleaned and checked by us. ER-025895 Vice PalletSet W 40mm ER-054922 flat vise 8mm PalletSet W ER-055774 Vice 0-170mm Gijdpeitcq Tjfx Af Ssw In addition, a functional test was carried out. The vices have slight signs of wear and are technically in very good condition. Individual purchase also possible. Spare parts are also available Do you have any questions? Then we are at your disposal.

Condition: ready for operation (used),