Used Disassemble for sale (1,014)

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Bodpfxezyc Rie Acnell The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1998, operating hours: 97,487 h, functionality: fully functional, Polishing robot used for water fittings, Blodpfx Aozvnfkjcnsl control system by C & B Electronic, continuous maintenance until 2026, many accessories included. Disassembly will be carried out by the customer!

Condition: used, Year of construction: 1989, power: 7.5 kW (10.20 HP), input voltage: 380 V, input current: 15 A, input frequency: 50 Hz, Equipment: documentation/manual, Sale of woodworking equipment: 3 sawing lines (in working condition) We offer for sale 3 complete sawing lines for a woodworking enterprise. The equipment is used but fully operational – the lines are running and actively working right now, so you can inspect them under real-world conditions. Each line is self-contained, equipped with its own dust extraction system, and is sold only as a complete set (without disassembling the machines). Blsdpszxzudjfx Acnol 🛠 LINE #1 Productivity: 30–35 m³ per shift. Log length: from 1200 mm to 2500 mm. Configuration: Loading ramp, edger, crosscut saw, 2-arbor multi-blade saw A.Costa, resaw, dust extraction system. Power consumption: Total power – 170 kW (of which, the multi-blade saw itself – 40 kW). 🛠 LINE #2 (High power) Productivity: 60 m³ per 10 hours of operation. Log length: specifically for 2500 mm (crosscut saw installed). Configuration: Loading ramp, edger, crosscut saw, multi-blade saw A.Costa, resaw, dust extraction system. Power consumption: Total peak power – 430 kW. 🛠 LINE #3 (For long logs) Productivity: 35–40 m³ per shift. Log length: from 2500 mm to 4000 mm (4 meters). Configuration: Loading ramp, edger Walter, multi-blade saw Raimann, trimming saw, dust extraction system. Power consumption: Total power – 200 kW. 📍 Location and terms of sale: Terms of sale: Each line is sold separately and only as a complete set. Disassembling the machines within the lines is not considered. Purchase of the entire complex (all 3 lines) is possible. Price: Available upon request. Location: Volyn region, Kovel (20 km from the city). We invite you to inspect the lines in operation.

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Blodpfxjyn Shzj Acnsl Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, torque: 600 Nm, controller manufacturer: fanuc, controller model: 18, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 600 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 1,500 kg, total height: 3,500 mm, total length: 5,000 mm, total width: 6,000 mm, table width: 700 mm, table height: 600 mm, table length: 1,400 mm, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, coolant supply: 25 bar, distance table center to spindle nose: 600 mm, spindle motor power: 26,000 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Sold with a 380/220 transformer; the machine actually operates at 220. Bledpszxzvhofx Acnol Incoterm EXW Torrelavega (Spain). The machine is sold as is, in its current installed location. Disassembly, handling, loading, transport, insurance, and any necessary permits will be the responsibility and risk of the buyer.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Blsdpszizkyofx Acnol Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes Bedpfxoyrp Uao Acnsll - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. Blodpfx Acszvht Ienjl EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. The number of feeders has not been counted; it will be confirmed upon request.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. Bjdpfxjyw Rzao Acnjll The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Bljdpfx Ajzu Rzfjcnel Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Condition: good (used), Year of construction: 2020, 2 units available! Bjdpfx Aezab Smjcnell Rear-mounted shelving system with 4 shelves, 650x300 mm, and 4 support arms for long parts. Perforated back panel. Workplace lighting. Height adjustment system via handwheel (fine adjustment in 5 mm increments per revolution). Pneumatic clamping device for clamping individual profiles for hardware assembly, 180° swiveling, with locking in 30° increments, locking pneumatically actuated. Clamping position adjustable in the longitudinal direction of the profile. Clamping range for profiles with a construction depth of 45-120 mm and a working width of 50-150 mm, each adjustable in 7 mm increments. 4 pneumatic connections, 5 electrical connections, 2 holders for hand drills or screwdrivers, etc., mounted on a sliding tool drawer. Drawer extends across half the table width on the right.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,300 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, cutting height (max.): 250 mm, total length: 350 mm, total height: 300 mm, cutting width (max.): 420 mm, total width: 50 mm, control cabinet width: 220 mm, saw blade diameter: 450 mm, rotational speed (min.): 3,000 rpm, overall weight: 5,000 kg, type of input current: three-phase, Weinmann WBZ160 POWERSIX machining/sizing center. Year 2019. Approximately 3300 operating hours. Serviced in July 2026 by a HOMAG technician (report available upon request). Very good overall condition. Blsdpfozwf Acox Acnel Fully functional. Machine has already been disassembled and is ready for loading (packaging done according to supplier specifications). Transport will require 2 covered semi-trailers (to be arranged and paid for by the buyer).

Year of construction: 2012, condition: refurbished (used), functionality: unexamined, TOSA 125E pallet wrapper (2012) for sale. It features an automatic film-changing system and a top-loading pallet wrapping system. Our company purchased two units but decided to use only one. The machine being sold is disassembled. The photos showing the assembled wrapper are of the other unit, which is installed at our facility. Bodpfx Ajzxllajcnoll

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Several production lines for sale: 1 MECATHERM line 2 BENIER/KAAK line Bjdpfx Aszwf Skecnoll 1 FRISTCH line for pastry production Still operational at the factory. Possible to visit before disassembly.

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 500 kg, Cloos robot with Qineo Pulse MIG/MAG welding power source 6-axis industrial robot Arc sensor / Tactile sensor Automatic torch cleaning 2-station operation Bodpfszty D Hex Acnjll Shows signs of wear, but is fully functional The system has already been disassembled and palletized. Installation and commissioning can also be offered.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: DA710219, overall weight: 430 kg, load capacity: 10 kg, For sale is a linear Cartesian robot for injection molding machines, manufactured by Star Automation Europe in 2019. The sale includes only the robot itself (mechanical arm and remote control), without the surrounding enclosure, hoppers, or conveyor belts. It is ideal for pick-and-place operations, part extraction, and assisted placement. Technical Specifications: Brand: STAR AUTOMATION EUROPE S.p.A. Model: XW-1000VI 2V Product Code: DA710219 Year of Manufacture: 2019 Certification: Original CE marking Compatibility: Optimized for injection molding machines ranging from approximately 150 to 250 tons (originally used on an Arburg 520). Included in the offer: - Cartesian robot body with 3 linear axes. Bedpezw Hy Aefx Acnjll - Original operating panel (remote control) for cycle programming. - Original user manual and electrical diagrams for the robot. Machine Condition: Used, in excellent mechanical and electronic condition, carefully disassembled.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 988, Jumberca SYX2 single-jersey circular knitting machine, machine number 988, year 1990. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Plate date: 04/25/1990 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking APPLICATION: Single-jersey knitted fabric: plain jersey, pique, and fabrics for outerwear, sportswear, and underwear. Bodpfx Aozvh Eqjcnsll INSTALLED EQUIPMENT: · Memminger-IRO LMW 3 yarn control unit · Electrical panel with LOYJE 13.220 transformers and ABB / BBC thermal-magnetic circuit breakers · Transformer with 200, 220, 380, 415, and 440 V taps · Stepped pulley drive · Complete top sinker plate · Emergency stop button NEEDLES: Groz-Beckert Vota 76.48 G09 cylinder needles and SNK 42.37-24 G2 sinkers. Internal set reference: SK 20 5719 001/00. POWER SUPPLY VOLTAGE: The transformer has taps for 200, 220, 380, 415, and 440 V, allowing the machine to be adapted to different power supply networks. CONDITION: Complete and assembled machine. Electrical panel accessible and photographed. A visit can be arranged for on-site inspection and operational testing. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, Bedpszw Apgofx Acnoll 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, functionality: fully functional, machine/vehicle number: 108813364, Single-sided circular knitting machine by Paolo Orizio S.p.A., model JO/5, machine number 108813364. Made in Italy. PLATE DATA · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1860 · Number of feeders: 72 · Cylinder number: 04871290 · Needles: VO 15752 T02SA / T03SA / T04SA · Sinkers: L7 22601 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION Single-sided knitted fabric with 72 feeders: plain jersey, pique, fleece and derivatives for outerwear, sportswear and underwear. Bljdpezvh Swofx Acnsl INSTALLED EQUIPMENT · Orizio MPF positive feeding system · Hole detector · Needle detector · Revolution counter and pre-selection · Open door warning · UNIWAVE mist lubricator · Complete upper butt · Fabric take-up with upper fan INCLUDED OPTIONS The machine panel indicates MPF-UNITS included and ROSEN-UNITS / HOLE-DETECTOR included. LUBRICATION Oil recommended on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain.

Condition: used, functionality: unexamined, Year of construction: 2019, The Dematic line is disassembled and ready for transport. Manufacturing date: 2019/2020. Technical throughput: – Conveyor capacity from the mezzanine to the induction stations – 1,800 cartons per hour – Conveyor capacity from the TTU sorter to VAS and the outbound sorter – 1,560 cartons per hour Loading units: a) Cartons on internal conveyors: – Average weight: 15 kg/carton – Dimensions: 600 x 400 x 400 mm – Weight: from 1 to 30 kg/carton b) Cartons on outbound conveyors: – Dimensions: 800 x 400 x 340 mm – No lid – Lid is applied at the end before shipment – Weight: from 1 to 25 kg/carton – Average weight: 15 kg/carton The line is equipped with two TTU sorters. The TTU sorter is a compact sorter that works perfectly in narrow spaces. The TTU is capable of sorting both plastic bags and cartons. Each sorter consists of 2 infeed areas and 300 discharge locations. The two combined sorters have 4 infeed lines and 600 discharge locations. Cartons on the conveyor are identified and transported to the appropriate zone on the sorter. Sorter equipment: – 32 workstations with 16 screens Bledezxrtkopfx Acnel – 16 screen supports – 20 RF scanners (10 per sorter) – 4 pallet discharge locations – SCS server – 2 Lantech case erectors and Robatech glue applicators – 2 Altek 700 kg scissor lifts, located on the outside of each sorter. Access to the platform is secured by a Troax system – when the lift is activated, access to the loading area is prevented by an electromagnetic lock. Additionally, the platform is enclosed with welded wire mesh. – 2 Fischer platforms – workstation for 12 employees (6 on each side), equipped with Data Logic barcode scanners and a Beckhoff CP3716-1071-0010 monitor.

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: AE/033731, functionality: fully functional, cutting height (max.): 60 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,650 rpm, overall weight: 3,006 kg, table height: 950 mm, Panel Saw – Technical Specifications Regarding the Casadei Busellato AXO 200 automatic panel saw, its key technical specifications are as follows: Parameter Value Cutting length 3800 Max. blade extension 60 mm Main motor power 9 kW Scoring saw motor power 1.3 kW Number of clamps (standard) 6 Main blade diameter 300 mm Scoring saw diameter 160 mm Main blade rotation speed 4650 rpm Scoring saw rotation speed 5850 rpm Work table height 950 mm Zebra GK4 20T label printer The machine is designed for cutting: Bljdpfszkbhzsx Acnsl MDF, particleboard, plywood, laminates, and other wood-based materials. The structural features include a rigid steel frame, a CNC-controlled automatic pusher, an air cushion table that facilitates the movement of panels, and the possibility of expansion with additional clamps and cut optimization. The saw will be in continuous operation on a part-time basis (1/4 of full-time) until the end of October 2026. Assistance will be provided with loading the saw. Disassembly for transport: 500 Euros. Loading onto a truck: 300 Euros.

Year of construction: 2017, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 7250, For sale: OctoFrost 6/2RH freezing tunnel – practically new, available immediately! Are you looking for a solution to quickly increase production capacity without waiting months for a new machine? We have a unique offer for you. We offer an OctoFrost 6/2RH freezing tunnel – an extended version, which has only operated for 100 hours. The unit is in practically factory condition, has been professionally disassembled, is located in our warehouse, and is ready for immediate installation. Technical parameters: ✅ Manufacturer: OctoFrost ✅ Model: 6/2RH ✅ Version: extended ✅ Dimensions: 7100 × 3000 × 3000 mm ✅ Operating time: only 100 operating hours ✅ Refrigerant: ammonia (NH₃) ✅ Refrigeration system: pump system Product Performance Peas up to 3,600 kg/h Blsdpfx Aozucihjcnol Corn up to 3,200 kg/h Green beans up to 3,000 kg/h Carrots (diced) up to 3,000 kg/h Broccoli up to 2,700 kg/h Cauliflower up to 2,500 kg/h Strawberries up to 2,520 kg/h Raspberries up to 2,000 kg/h Blueberries up to 2,700 kg/h Cherries up to 2,600 kg/h Peppers (diced) up to 2,500 kg/h Mushrooms up to 2,600 kg/h Potatoes/fries up to 1,800 kg/h Meat (20 mm cubes) up to 2,340 kg/h Fish/seafood up to 2,300–2,500 kg/h Shrimp up to 2,300 kg/h The price includes a complete set: ✔ OctoFrost 6/2RH freezing tunnel ✔ Feeder ✔ Vibrator ✔ AUMA Somas valve station ✔ Control cabinet 💶 Price: 320,000 EUR – a complete, ready-to-install solution. Why is it worth it? ✔ practically new machine at a price significantly lower than a new device, ✔ immediate availability – without a long waiting time for production, ✔ proven OctoFrost technology, valued worldwide for its high IQF freezing quality, gentle handling of the product, and reliability, ✔ ideal solution for facilities planning to increase production capacity or modernize their lines. 🔧 We provide a start-up guarantee. Additionally, we offer the possibility of comprehensive connection, commissioning, and technical support by our company, NGS Serwis. This way, you receive not only the equipment but also professional installation and the assurance of trouble-free production start-up. If you are looking for a premium-class IQF tunnel that is practically new, fully equipped, and available immediately, this offer is a unique opportunity. Please contact us via private message or email to obtain a detailed specification, additional photos, and to arrange a demonstration of the equipment.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001, Equipment: CE marking, DEKCEL 150 W Industrial CO₂ Laser – Usable Area: 2,650 x 1,450 mm – Complete equipment ready for production Price: €7,500 + VAT For sale: a DEKCEL 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before disassembly. The machine is being sold exclusively due to a technological upgrade following the introduction of new, state-of-the-art RF laser equipment. Equipped with a Ruida DSP industrial controller, RDWorks software, and a fully configured computer, it is ready to start working from day one. It features a large usable working area of 2,650 x 1,450 mm, ideal for machining entire sheets of MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube and also comes with a second, brand-new 150 W RECI laser tube, providing the buyer with significant savings on future maintenance costs. Bedszmqaxspfx Acnoll The price includes: • DEKCEL 150 W industrial laser machine. • Usable working area: 2,650 x 1,450 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • CW-5200 industrial chiller. • Installed and operational RECI 150 W laser tube. • New spare RECI 150 W laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. The machine can be seen in operation before disassembly, allowing you to verify its performance, precision, and cutting quality. An excellent opportunity to acquire a large-format industrial machine that is fully operational and comes with a significant set of accessories and spare parts, ready to continue production from day one. _____ This is not just a used machine; it is delivered as a complete industrial system with strategic spare parts included, which minimizes maintenance costs and ensures quick start-up.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: WB-Res, DEMAG KBK overhead crane system, span approximately 11x7m – extension possible! Load capacity / lifting capacity 1000 KG - 1 ton Technical data of the system: Crane track made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, running gears, end plates, cable carriers, supports/hangers, etc. including power supply in the bridge! including Demag PK5 1000KG chain hoist Crane is disassembled and immediately available Bsdpfx Acezxa Rwenjll Several bridges with spans from 5-8m are available, please inquire about the required dimensions (length and width)! Available load capacities: 500, 700, 800, 1000 KG Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems are also in stock. Load capacity 125KG - 1600KG Please inquire about your overhead crane system with the required load capacity and dimensions.

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Blsdpjy Iwdpjfx Acnel Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)