Used Discharge for sale (2,700)

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Hfsdpoz N Am Ujfx Ag Esn Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Year of construction: 2024, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 350 mm max. workpiece size X: 600 mm max. workpiece size Y: 400 mm max. workpiece size Z: 350 mm max. workpiece weight: 4600 kg table size X: 1050 mm table size Y: 710 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150/150 mm generator: 40 Ampere working hours approx: 3000 h Technical Specifications: Work tank dimensions (W × D): 1,050 × 710 mm Wire diameter: 0.1–0.3 mm Max. wire feed speed: 420 mm/s Max. wire spool weight: 20 kg Wire tension: 3–23 N Machine dimensions (W × D × H): 2,575 × 2,945 × 2,345 mm Machine weight: approx. 4,600 kg Power requirement: 13 kVA, 3-phase, 50/60 Hz Hjdpfxjz Ngr Uj Ag Ejfn Control System: Sodick SPW CNC Control 19-inch TFT LCD Multi-Touch Screen Windows-based Operating System

Condition: refurbished (used), Year of construction: 2017, operating hours: 3,751 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, feed length Y-axis: 3,300 mm, GF CUT200SP, year 2017. Machine available at our Semsales premises in April. The machine will be fully cleaned and serviced. 0.1 mm option. Wire chopper. Hsdpfxeyk Upae Ag Eofn

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 420 x 300 x 300 mm Hfjdpfxozwcfho Ag Een Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. 08/28.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2014. It features an impressive X/Y/Z axes travel of 800 mm x 550 mm x 510 mm and U/V axes travel for tapering of 800 mm x 550 mm. The machine can handle workpieces up to 1300 mm x 1000 mm and 3000 kg in weight. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Hfodpfxez Hwnys Ag Een - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: excellent (used), Year of construction: 2014, operating hours: 23,000 h, functionality: fully functional, For sale: a used Moba Omnia 125 XF egg grader built in 2014, inline configuration (left-hand machine) and in very clean condition. Always maintained by the dealer, ready for production; no overhaul is needed. Available from April 2027. Hfodpfoz R E Ahjx Ag Een The machine connects directly to the poultry house, grades the eggs by weight and packs them automatically. Complete with candling booth, case discharge and SOCO case taper, fitted with the optional long end conveyor and the latest MMI software. Technical specifications: - Brand / model: Moba Omnia 125 XF - Year of manufacture: 2014 - Capacity: 45,000 eggs per hour (125 cases per hour) - Running hours: 23,000 - Packing lanes: 8 - Closers: 4 - Configuration: inline, left-hand machine - Software: latest MMI software - End conveyor: long end conveyor (option) - Candling booth: yes - Case discharge: conveyor with 90-degree curve - Case taper: SOCO - Inkjet printers: not included - Label printers: not included, negotiable - Condition: very clean, dealer maintained - Available: from April 2027 Delivery and installation: we can handle dismantling, transport and installation, in the Netherlands and worldwide. Price on request.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2316-01, working width: 600 mm, Type 41 Series 600 WRD Hsdpfx Ager Nbpbs Esfn Working width 600 mm Ideal machine for deburring and finishing of metal products Equipped with grinding belt and disc/brush aggregate

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. Hsdjz Atdrepfx Ag Eefn This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.

Condition: used, Year of construction: 2007, Overview This Gernep Labetta 10-640 2SK is a rotary self-adhesive labelling machine for glass bottles, built in 2007 and used in spirits production. It works with a 10-station carousel and two self-adhesive labelling stations for front/body and back labels, at an output of 8,000 bottles per hour (up to 10,000 bottles per hour depending on the format). The machine comes with format parts and format documentation for 0.7 l, 0.75 l and 1.0 l glass bottles. It is dismantled and stored. Hfedpfxez Stixe Ag Eon Technical data - Manufacturer: Gernep - Model: Labetta 10-640 2SK - Year of manufacture: 2007 - Machine type: rotary self-adhesive labeller - Containers: glass bottles 0.7 l, 0.75 l and 1.0 l - Output: 8,000 bottles/h, up to 10,000 bottles/h depending on format - Carousel: 10 stations with rotating bottle plates and spring-loaded top centering - Labelling stations: 2 self-adhesive dispensers - Label positions: front/body label and back label - Control: Siemens TD 200 text display on a stainless steel operator panel Equipment - Inline bottle conveyor with stainless steel frame - Infeed and discharge star wheels with guides - Format parts for the 0.7 l, 0.75 l and 1.0 l bottles: star wheels, guide segments, bottle plates and centering bells - Format documentation and drawings with the settings per bottle and label position - Push buttons and selector switches for machine and conveyor on/off, fault reset, automatic fast/slow and manual mode - Digital counter display - Emergency stop and transparent safety guarding Condition Used, in good condition. The machine ran in production with self-adhesive labels on glass bottles until its dismantling and is now stored together with its format parts. Availability Available immediately. Location: Belgium. Viewing is possible by appointment.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, wire diameter (max.): 0.3 mm, table load: 3,000 kg, controller manufacturer: MITSUBISHI, controller model: MV-4800, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15" touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details. - Travel (U, V): ±100 mm- Maximum Workpiece Dimensions: 1200 x 1020 x 505 mm- Maximum Workpiece Weight: 3000 kg- Table Base: Closed mounting base, 4-side hardened frame table- Drive System: Tubular direct drives in X/Y axes, Optical Drive System (ODS)- Measuring System: Linear scales in X, Y, U, V axes- Wire Threading: Intelligent AT - Automatic wire threading without water jet (for wire diameter 0.15 - 0.3 mm)- Wire Station: 20 kg wire station- Control Unit: MITSUBISHI ELECTRIC ADVANCE M700 with 15" Touch Screen- Control Features: 3D CAD/CAM on board, 10 GB user hard drive, ESPERADVANCE dialog system, 3D Parasolid import, 3D graphic check, Hand pilot- Control Interfaces: Ethernet TCP-IP, 2 x USB Port, prepared for mcAnywhere- Generator & Processing Technologies: - PFC (Precise Finish Circuit) high-speed sensing - HSS-AE Anti-Electrolysis Generator - ECONO CUT wire consumption reduction - POWER MASTER process safety system - CORNER MASTER³ radius shaping - ORBIT MASTER circular machining - DIGITAL AE II parallelism optimization - SL-CONTROL for height steps - TS-MASTER for homogeneous surface structures- Equipment: Automatic fine hole search, Easy 3D-Setup, Wire alignment block, Wire chopper, Compressor cooler, E.KO IONISER Hfodpfx Agez Nk T Ns Ejn

Condition: excellent (used), Year of construction: 2021, SN: 01CS4056, Gewicht 5900 kg, Arbeitsbereich 1.250 x 1.020 x 505 mm, Tischbelastung max. 3.000 kg, Steuerung, Schalt-/Steuerschrank, Nullpunkt-Spannsystem, m. Zubehör Hfjdezlfa Ropfx Ag Ejn Der Preis versteht sich als Netto-Ab-Werk-Preis. Demontage, Hebearbeiten und Verladung erfolgen auf Kosten und Risiko des Käufers."

Condition: used, Year of construction: 1998, Overview Automatic keg cleaning and filling machine M+F KEG-Technik MINOMAT A 5/4 (1998) with upstream keg outside washer M+F AW 1100 (2000). Compact single-row keg line with roller conveyors for keg infeed and discharge, for kegs with flat fitting. Output 45-50 kegs per hour. Suitable for craft and large breweries. Technical data - Manufacturer: M+F KEG-Technik - Keg cleaning and filling machine: MINOMAT A 5/4, year of manufacture 1998 - Keg outside washer: AW 1100, year of manufacture 2000 - Output: 45-50 kegs/h - Keg fitting: flat fitting - Control: Siemens S5 PLC - Power supply: 230/400 V, 50 Hz - Control voltage: 24 V DC - Operating pressure: 5.5 bar (MINOMAT A 5/4), 3.5 bar (AW 1100) - CE marked Scope of Delivery Hedez Su Hrepfx Ag Eefn - Keg outside washer | M+F KEG-Technik | AW 1100 | brush washing of the keg exterior | 2000 - Keg cleaning and filling machine | M+F KEG-Technik | MINOMAT A 5/4 | automatic cleaning and filling, stainless steel enclosure with safety doors | 1998 - Roller conveyors for keg infeed and discharge - Control cabinet with operator panel Condition Still installed and under power. Inspection on site is possible by appointment. Availability Available from 16 November 2026.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Year of manufacture: 2007 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Hfsdpfxjz I Ri Te Ag Ejn Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Including AGIEJOGGER hand box for convenient setup Including AGIESETUP 3D AGIEVISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has already been cleaned, overhauled, and thoroughly tested by us. You will receive a 6-month warranty on this! You are welcome to inspect and test the machine in our workshop while it is powered on. Includes user training at Techma on your overhauled machine. Optionally, we would be happy to offer you the following additional services: - Transport - Commissioning - Training - Cooler

Condition: excellent (used), SCM K360 Edge Banding Machine Liquids Pre-milling cutters, Edge banding with roller, Replaceable adhesive tank Features adhesive discharge valve Pneumatic pre-cutting guillotine, Trimming saws R1-R2 top and bottom milling unit, pneumatically adjustable Corner rounding unit, pneumatically adjustable Profile trimming unit, pneumatically engaged Cleaning fluids Hjdpjz Sl R Nefx Ag Esfn Straight trimming unit, Max. element height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Total run distance approximately 33,000m Very good condition Inspection and testing possible on-site

Condition: new, Length 3500 mm Stainless steel structure Hsdpfxez Ri Rcj Ag Ejfn *Complete with  * - Side guides - Support feet - N° 2 adjustable speed motors - Chains width 82.6 mm - Motorized device with idle rolls for round bottle sliding

Condition: used, Year of construction: 2020, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :420 mm Hfsdpjzg T Ewjfx Ag Ejn Travel distance Z: 370 mm table size X: 750 mm table size Y: 550 mm max. workpiece size X: 950 mm max. workpiece size Y: 740 mm max. workpiece size Z: 450 mm max. electrode weight: 50 kg max. workpiece weight: 1500 kg electrode changer: 32 - time C-axis generator: 40 Ampere working hours approx: 160 h cooler drop tank Linear motor 32-position Electrode Changer

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 576308, workpiece weight (max.): 7,500 kg, total height: 3,360 mm, total width: 2,150 mm, total length: 3,600 mm, table length: 1,640 mm, table height: 1,140 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,510 mm, feed length Z-axis: 650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, overall weight: 12,640 kg, Equipment: documentation/manual, CNC SINKER EDM MACHINE – OPS-INGERSOLL GANTRY EAGLE 1200 For sale: a large-format, premium-class CNC sinker EDM machine – OPS-Ingersoll Gantry Eagle 1200. Manufactured in Germany, its gantry structure (Mobile Portal) provides the highest geometric stability and micron-level precision when machining heavy molds and dies. MACHINE SPECIFICATIONS • Manufacturer: OPS-Ingersoll Funkenerosion GmbH (Germany) • Model: Gantry Eagle 1200 • Serial number: 576308 • Year of manufacture: 2009 • Conformity mark: CE GEOMETRIC PARAMETERS AND KINEMATICS (Axes) Full 4-axis system, digital AC servo drives: • X-axis travel (head): 1000 mm • Y-axis travel (portal): 1510 mm (loading position extended to 1955 mm) • Z-axis travel (slide): 650 mm • Integrated C-axis: 360° rotation, 0.001° resolution, 1–20 rpm speed • Feed rate (X, Y, Z): up to 5,000 mm/min • High-Speed Jump speed: Eagle Power Jump technology up to 18,000 mm/min (18 m/min) WORK TABLE AND MACHINING AREA • Table dimensions: 1140 x 1640 mm • Maximum table load: 7,500 kg (7.5 tons) • Maximum electrode weight: up to 300 kg (manual operation up to 50 kg, automatic operation up to 25 kg) • Work tank: Automatically lifting/lowering tank structure (Lifting container). • Internal tank dimensions: 1270 x 1770 x 680 mm (max. dielectric level: 640 mm) PULSE GENERATOR (Eagle PowerTec) • Technology: Adaptive current control, resistor-less pulse generator. • Pulse shaping: Adaptive waveform (rectangular pulses, modified rectangular pulses, capacitor pulses). Hjdpfx Aozum Ubog Eofn • Working current: PT 60 / PT 110 current module (60 A or 110 A depending on the configuration). CONTROL SYSTEM AND HMI COMPUTER • Control model: PC-NC-Dialog (2 x 32 bit), adaptive Eagle PowerTec control with a 17" LCD monitor • HMI unit: Andronic 2060S industrial computer (Intel Celeron M 1.6 GHz, 80 GB hard drive, Soft PLC CoDeSys, InterBus-S). • Operating system: Microsoft Windows® XP® Professional Embedded. • Communication: USB 2.0 ports and Ethernet network interface. • Advanced functions: Orbital erosion, backlash compensation, automatic measuring cycles. • Remote control: PowerTec Handheld with display. AUXILIARY SYSTEMS AND AUTOMATION • Filtration system: Cartridge filters in the base, area approx. 32 m², capacity 2800 liters of dielectric. • Cooling: Compressor unit with a cooling capacity of 7.9 kW. • Lubrication: Automatic centralized axis lubrication. • Safety: Factory-installed fire extinguishing system (16 kg CO₂ cylinder) with automatic monitoring – enables safe unattended operation. LOGISTICAL AND TRANSPORTATION DATA • Transportation dimensions of the machine body (width x depth x height): 2150 x 3600 x 3360 mm • Transportation weight of the machine body: 12,000 kg (12 tons) • Transportation dimensions of the generator: approx. 1800 x 1600 x 2310 mm • Transportation weight of the generator: approx. 640 - 700 kg • Total set weight: approx. 12,640 kg

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Hodpfx Agoz Rwimo Ejfn Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Description Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/screen by a paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination to optimize residence time and separation efficiency. Sold with a 1000 L hopper and a flexible screw conveyor. In like-new condition (used only for testing), fully functional, and available immediately. Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solid outlet) • Construction: 304 stainless steel • Basket/screen: wedge wire basket (304 stainless steel) • Paddle: “expanded 7.5°” (304 stainless steel) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg • Purge air/gas (seals): clean/dry/filtered air/gas required Motor (motor plate) • Motor 3~: 2.2 kW, 50 Hz, 230 V Δ / 400 V Y • Speed: 1450 rpm (50 Hz) • Protection / efficiency: IP55, IE3 • Mounting: IM B35, service S1 Included equipment (sold with) 1) Hopper • Volume: 1000 L • 304 stainless steel, open design, “food grade” finish (Type C Plus) • Level probes: high + low • 30° outlet 2) Flexible screw conveyor • Supplier: Spiroflow Ltd • Model: 146SH • Length / inclination: 3 m 30° • Outlet: Ø300, 30° standard • Components: reverse bung / drop trap / QR flanges (quick disassembly) Hodjzc H H Iepfx Ag Ejfn Price and conditions • Availability: immediate • Location: Martigny (Switzerland) • Condition: like new, functional • Visit / inspection: upon request Transportation costs are the responsibility of the buyer.

Condition: used, AZO big bag discharge station Hjdpfx Agezh Ndle Eefn Includes vibrating table and vibrating base with metering screw. Previously installed on a mezzanine floor. Capacity: approximately 2-3 big bags. Entirely made of stainless steel 316. See our other listings.

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Interfaces: Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve These are two silos – the package price is 15% lower than the stated individual price of a single silo. Hfsdpez Nkt Nofx Ag Esn

Condition: excellent (used), functionality: fully functional, Stable Linck roller conveyor with 2 discharge options. Total length: 16.30 m. Roller length: 950 mm. Construction height: 1.55 m. Equipped with 6 ejectors for left/right discharge. Includes impact wall, control flap, and electrical switch cabinet with control system. Suitable for model and sawn material. Hsdpfx Agsyzr Nto Eefn

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 90864300, For sale is a hydraulic CNC plate shear from the German manufacturer RAS, type POWERcut 86.43, built in 2018, with a cutting length of 4 m. The machine features extensive special equipment for precise sheet metal processing, as well as integrated material handling with cut-piece return, small part sorting, and scrap separation. Technical specifications: Manufacturer: RAS Model: POWERcut 86.43 Machine type: Hydraulic CNC plate shear Year of construction: 2018 Machine number according to documentation: 90864300 Control: CNC Back gauge: CNC-controlled, 5 mm Blades: Special blades, also suitable for stainless steel Equipment: Hydraulic individual clamping cylinders Base machine raised by 100 mm Angle stop on the left, 1,500 mm 2 table extensions 4 short table plates 33 steel ball rollers Tilting stop with precision scale Sorting and holding system on the back gauge Hjdpfxsz R D Suj Ag Ejfn 3 tilting positions Small part sorting Scrap separation Large part discharge Automatic cut-piece return Scrap conveyor movable to the side or rear Safety devices: Safety device to protect the rear of the shear Safety light curtain Protective enclosure on the right and left Inspection and sale: An inspection of the machine is possible after prior appointment. Further information on the technical condition, availability, and sales conditions is available upon request.

Condition: used, functionality: fully functional, The conveyor belt is for sale; technical details: Voltage: 220 volts / 50 Hz Frequency inverter: adjustable from 0-6 m/min Discharge height: 700 mm Inclined belt length: 1300 mm Usable width: 400 mm Overall width: 600 mm Mobile Height-adjustable Discharge height: 900 mm - 1100 mm Guide plate: 80 mm Hsdpfxoz Sxiko Ag Ejfn

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Manufacturer: Duplo / FKS Model: PFi Blade B2+ Category: Digital flatbed cutting plotter Year of manufacture: 2023 Condition: Like new TECHNICAL DATA & FORMAT: - Max. sheet size: 800 x 600 mm (B2+) - Min. sheet size: 210 x 297 mm (A4) Hfsdpfxsz Rkqks Ag Een - Max. material thickness: up to 1.3 mm (approx. 1000 g/m²) - Feeder: Automatic vacuum belt feeder - Feeder stack height: 100 mm FEATURES & EQUIPMENT: - Multi-tool head (cutting, scoring, creasing) - Oscillating knife for thicker materials (corrugated board, honeycomb board) - Tangential / drag knife - Creasing wheel - CCD camera system for automatic register mark & QR code recognition - Vacuum table for sheet fixing - Inclined discharge / sheet discharge - PFi Blade PC software incl. control unit